Dimensional Variation Modeling of Aircraft Compliant Part Assembly Considering Clamping Force Change

Compliant parts are widely applied to aircraft structures. Due to the ease of deformation of compliant parts in assembly,the prediction of assembly variation is especially important for assembly quality control. A dimensional variation model considering the clamping force change in assembly is proposed based on the method of influence coefficient(MIC). First,the assembly process is decomposed into several steps including positioning,clamping,joining,and spring-back. Then,the force-displacement relationship is formulated according to the varied force conditions on the parts in each assembly step. Finally,two examples are illustrated to validate the proposed assembly variation model. The results show the impact of clamping force change is significant on the assembly variation,and the proposed model can predict the assembly variation more accurately than the referred method without clamping force correction at the over-constrained locating points of fixture.     

低压断路器灭弧室温度检测

设计了基于光纤光栅传感系统的低压断路器灭弧室温度检测装置,实验测量出灭弧室温度数据,进行了数据的有限元分析,绘制出灭弧室内温度场分布图.     

基于非下采样轮廓波变换的红外和SAR图像融合算法

针对现有红外和合成孔径雷达(Synthetic Aperture Radar,SAR)图像的融合算法融合质量差、边缘轮廓不清晰、效率低下、可视性差,目标检测效率低等问题,提出一种基于非下采样轮廓波变换的融合算法。首先采用非下采样轮廓波变换对预处理的红外和SAR图像进行分解,获得各自低频和带通方向图像,接着根据红外和SAR图像的特征选取其含重要目标信息的频带进行低频图像和带通方向图像融合。为了检验本文所提出算法性能的优越性,采用两组红外和SAR图像进行融合实验,与其他图像融合算法进行对比,并对融合图像进行目标检测,证明了该融合算法能有效提高多源图像目标检测率。     

无刷直流电机的模型预测与反演控制

为提高永磁无刷直流电机的控制精度、负载工作能力和响应速度，分析了电机的电气特性与机械特性，建立了连续时间系统下状态空间形式的电机模型，得到了电机转角、转速受控变化的规律;在离散时间控制系统中，采用了状态转移模型预测和估计系统误差，根据电机转动规律反演控制指令，提出了一种基于模型预测与反演，对电机转速、转角进行独立/联合控制的方法;在考虑工程实际应用中电机存在参数、测量等误差的情况下，与PID控制、滑模控制方法进行了负载情况下典型工况的对比仿真。仿真表明:所设计的控制器具有较好的控制精度、响应速度和鲁棒性。     

天文观测卫星动中探测机动测试系统设计

天文观测卫星普遍采用动中探测模式开展空间探测任务。为了实现动中探测姿态机动模式的地面有效验证，设计了整星机动集成测试方案。设计惯性空间基准的地面动力学仿真，满足惯性空间扫描仿真；设计整星各分系统间高精度时间统一系统，为整星机动测试提供统一基准；基于STK与Matlab接口模块，设计基于实时遥测数据的可视化判读系统，可提高测试判读实时性与准确度。整星测试结果表明，该方案有效验证了动中探测任务中姿态机动功能的正确性和指标符合情况，为开展整星地面测试和在轨应用提供了参考。     

Effects of stability margin and thrust specific fuel consumption constrains on multi-disciplinary optimization for blended-wing-body design

Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation". The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.     

基于能量等效的直齿锥齿轮时变啮合刚度计算

针对直齿圆锥齿轮啮合刚度的计算问题,从微元思想出发,将变截面齿廓划分为若干等截面微段齿段,基于能量等效建立微段齿段啮合刚度计算模型,并利用积分方法获得单齿啮合刚度。此外,基于力平衡和变形协调条件进一步提出了齿轮时变啮合刚度计算模型,同时根据几何关系导出了相应传动误差计算式。利用有限元分析对解析计算模型进行了验证,并分析了误差来源。结果表明:利用该模型不仅能够将直齿锥齿轮啮合刚度计算精度保证在2%以内,还达到了快速求解的目的。      

U型脉冲爆震燃烧室的点火起爆工作特性试验研究

为了缩短脉冲爆震燃烧室轴向长度,开展了气液两相U型脉冲爆震燃烧室（U-PDC）点火起爆特性试验研究。试验时采用火花塞点火和热射流点火,且点火能量可调。研究结果表明,两种点火方式均可实现U-PDC工作频率10~30Hz稳定工作,且DDT时间随工作频率提高而缩短,在5~11ms之间。此外,实现U-PDC稳定工作时,热射流所需的点火能量为0.05J较火花塞点火能量1J更低,并且热射流点火DDT距离更短,约718mm,起爆位置距来流入口的轴向距离约280mm,缩短了起爆所需的轴向长度,有利于工程应用。但是,进一步提高热射流点火能量,其DDT距离无明显变化。     

高超声速双模块内转式进气道的流动特性研究-Part II 攻角影响

为了研究飞行攻角对高超声速双模块内转式进气道流动的影响,本文通过试验和仿真方法,获得了0°,4°和6°攻角条件下进气道模块内的流动结构。结果表明：在本文研究的攻角范围内,进气道均可起动,进气道压缩面侧的压力变化体现了基准流场的流动特性。在耦合作用下进气道模块间压缩面诱导的激波形态沿流向由弓形逐渐发展为钟形,并且在外压缩激波的扫掠影响下进气道的三个角区出现了强度不同的旋涡结构。进气道压缩面侧的角区旋涡随着攻角的增加而逐渐增强,而进气道出口截面上低能流区域随着攻角的增加而逐渐减小。低能流区域内的二次旋涡呈现不同的变化趋势,位于上半截面的旋涡随着攻角的增加其逐渐向上移动,而位于下半截面的旋涡位置基本保持不变。     

双轴旋转调制光纤惯导系统运动隔离控制实现

框架旋转控制的稳定性、快速性、准确性是捷联式双轴旋转调制惯导系统发挥精度潜力的重要保障条件.针对这一需求,搭建了双轴旋转控制系统,选用了直流力矩电机结合旋转变压器的硬件结构,设计了基于DSP的高速控制线路板作为控制器,完成了信号流程的构建,并设计相应PI控制算法,实现了光纤陀螺惯导系统隔离载体运动的旋转控制功能.实验结果表明,IMU姿态隔离效率达99％以上,框架旋转控制性能良好,能够满足系统隔离载体运动的需求.