Subfreezing activity of microorganisms and the potential habitability of Mars' polar regions

The availability of water-ice at the surface in the Mars polar cap and within the top meter of the high-latitude regolith raises the question of whether liquid water can exist there under some circumstances and possibly support the existence of biota. We examine the minimum temperatures at which liquid water can exist at ice grain-dust grain and ice grain-ice grain contacts, the minimum subfreezing temperatures at which terrestrial organisms can grow or multiply, and the maximum temperatures that can occur in martian high-latitude and polar regions, to see if there is overlap. Liquid water can exist at grain contacts above about -20 degrees C. Measurements of growth in organisms isolated from Siberian permafrost indicate growth at -10 degrees C and metabolism at -20 degrees C. Mars polar and high-latitude temperatures rise above -20 degrees C at obliquities greater than ~40 degrees, and under some conditions rise above 0 degrees C. Thus, the environment in the Mars polar regions has overlapped habitable conditions within relatively recent epochs, and Mars appears to be on the edge of being habitable at present. The easy accessibility of the polar surface layer relative to the deep subsurface make these viable locations to search for evidence of life.     

Large aerial bursts: an important class of terrestrial accretionary events

Large aerial bursts similar to the 1908 Tunguska bolide but much larger in magnitude have surely been responsible for many catastrophic events in the history of the Earth. Because aerial bursts produce shallow (or even negligible) craters, their existence is difficult to document in the geological record. Even aerial bursts as small as Tunguska deposit enough energy to melt approximately 1mm of dry soil. Silica-rich glass formed in such melts has the potential to survive in the soil for many Ma, thus a potential indicator of large aerial bursts is glass that was formed as thick regions within silicate melt sheets. The layered tektites from Southeast Asia and the Libyan desert glass may have formed by a combination of sedimentation and downslope flow of silicate melt heated by radiation from large aerial bursts. The alternative, formation of layered tektites as crater ejecta, cannot account for observations such as uniformly high 10Be contents, the orientation of the magnetic remanence field, and the absence of splash-form (e.g., teardrop or dumbbell) tektites in regions where layered tektites are common. The largest asteroids or comets make craters no matter what their strength. Recent reviews suggest that, for events in the energy range up to 10(19)-10(20) J (about two orders of magnitude larger than the Meteor Crater impact), aerial bursts are more likely than cratering events, and the layered tektites of Southeast Asia imply the existence of aerial bursts one to two orders of magnitude larger still.     

Planetary Missions of the 20th Century*

Among of the highlights of the 20^th century were flights of spacecraft to other bodies of the Solar System. This paper describes briefly the missions attempted, their goals, and fate. Information is presented in five tables on the missions launched, their goals, mission designations, dates, discoveries when successful, and what happened if they failed. More detailed explanations are given in the accompanying text. It is shown how this enterprise developed and evolved step by step from a politically driven competition to intense scientific investigations and international cooperation. Initially, only the USA and USSR sent missions to the Moon and planets. Europe and Japan joined later. The USSR carried out significant research in Solar System exploration until the end of the 1980s. The Russian Federation no longer supports robotic planetary exploration for economic reasons, and it remains to be seen whether the invaluable Russian experience in planetary space flight will be lost. Collaboration between Russian and other national space agencies may be a solution.     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

Usefulness of daily +2Gz load as a countermeasure against physiological problems during weightlessness.

Adaptation to head-down-tilt bed rest as a simulated microgravity leads to an abnormality of reflex control of circulation, hypovolemia and reduction of exercise capacity. We hypothesized that this cardiovascular deconditioning and reduction of exercise capacity could be prevented by a daily 1 hr centrifugation at +2Gz. To test this hypothesis, twenty healthy male subjects underwent 4 day of 6 degrees head-down-tilt bed rest. Ten of them were exposed to a +2Gz load for up to 30 min twice per day (the Gz group). The remaining 10 were not exposed to a Gz load (the no-Gz group). We estimated autonomic cardiovascular control by power spectral analysis of blood pressure and R-R interval variability, and baroreflex regulation by the transfer function analysis and the sequence method, before and after bed rest. Further, we measured hematocrit as an index of changes in plasma volume and maximal oxygen consumption as an index of exercise capacity, before and after bed rest. Result: In the no-Gz group, heart rate increased after bed rest. The high frequency power of R-R interval variability as an index of cardiac parasympathetic nervous activity, baroreflex gains estimated by transfer function analysis and the sequence method as index of the integrated arterial-cardiac baroreflex function decreased significantly. Associated with these changes, the ratio of low to high frequency power of R-R as an indicator of cardiac sympathovagal balance tended to increase after bed rest in the no-Gz group. However, those showed no significant changes after bed rest in the Gz group. Hematocrit increased after bed rest in the no-Gz group. It also tended to increase in the Gz group, however it did not achieve statistical significance. Maximal oxygen consumption decreased significantly to similar extent in both the groups. Conclusion: This result suggested that 1) a daily 1hr +2Gz load produced by a centrifuge might eliminate the changes in autonomic cardiovascular control during simulated weightlessness; 2) furthermore, it might partly reverse hypovolemia induced by bed rest; 3) however, it could not prevent the decreases in exercise capacity.     

Return to Europa: Overview of the Jupiter Europa orbiter mission

Missions to explore Europa have been imagined ever since the Voyager mission first suggested that Europa was geologically very young. Subsequently, the Galileo spacecraft supplied fascinating new insights into this satellite of Jupiter. Now, an international team is proposing a return to the Jupiter system and Europa with the Europa Jupiter System Mission (EJSM). Currently, NASA and ESA are designing two orbiters that would explore the Jovian system and then each would settle into orbit around one of Jupiter’s icy satellites, Europa and Ganymede. In addition, the Japanese Aerospace eXploration Agency (JAXA) is considering a Jupiter magnetospheric orbiter and the Russian Space Agency is investigating a Europa lander.     

Compact frequency standard using atoms trapped on a chip

We present a compact atomic frequency standard based on the interrogation of magnetically trapped ⁸⁷Rb atoms. Two photons, in the microwave and radiofrequency domain excite the atomic transition. At a magnetic field of 3.23 G this transition from ∣F = 1, m_F = −1〉 to ∣F = 2, m_F = 1〉 is 1st order insensitive to magnetic field variations. Long Ramsey interrogation times can thus be achieved, leading to a projected stability in the low 10⁻¹³ at 1 s. This makes this device a viable alternative to LITE and HORACE as a good candidate for replacing or complementing the rubidium frequency standards and passive hydrogen masers already on board of the GPS, GLONASS, and GALILEO satellites. Here we present preliminary results. We use an atom chip to cool and trap the atoms. A coplanar waveguide is integrated to the chip to carry the Ramsey interrogation signal, making the physics package potentially as small as (5 cm)³. We describe the experimental apparatus and show preliminary Ramsey fringes of 1.25 Hz linewidth. We also show a preliminary frequency stability σ_y = 1.5 × 10⁻¹²τ^−1/2 for 10 < τ < 10³ s. This represents one order of magnitude improvement with respect to previous experiments.     

Clouds and Earth Radiant Energy System (CERES), a review: Past,present and future

The Clouds and Earth Radiant Energy System (CERES) project’s objectives are to measure the reflected solar radiance (shortwave) and Earth-emitted (longwave) radiances and from these measurements to compute the shortwave and longwave radiation fluxes at the top of the atmosphere (TOA) and the surface and radiation divergence within the atmosphere. The fluxes at TOA are to be retrieved to an accuracy of 2%. Improved bidirectional reflectance distribution functions (BRDFs) have been developed to compute the fluxes at TOA from the measured radiances with errors reduced from ERBE by a factor of two or more. Instruments aboard the Terra and Aqua spacecraft provide sampling at four local times. In order to further reduce temporal sampling errors, data are used from the geostationary meteorological satellites to account for changes of scenes between observations by the CERES radiometers.     

A regional tropospheric model for airborne GPS applications

A regional tropospheric model can be constructed using surveys from GPS ground networks. Using this model the tropospheric delays of a kinematic station within the region can be interpolated. However, such a model is generally not suitable for an airborne platform high above the ground networks. In this paper, a method of constructing a regional tropospheric model for airborne GPS applications is described. First, the kinematic station in the air is projected onto the ground. Then the tropospheric delays at projected point are interpolated from those of the ground networks. Finally, the tropospheric delays at projected point are extended upward to the airborne platform using pressure and temperature gradients and humidity exponential function. For validation of this method, the data of airborne campaign carried out by BKG in cooperation with GFZ and BGR 2008 in the northern Alps are used. The results show that GPS kinematic positioning precision in height component can be improved using this method.     

Science operations planning expertise: A neglected component of mission design

In this paper, Science Operations Planning Expertise (SOPE) is defined as the expertise that is held by people who have the two following qualities. First they have both theoretical and practical experience in operations planning, in general, and in space science operations planning in particular. Second, they can be used, on request and at least, to provide with advice the teams that design and implement science operations systems in order to optimise the performance and productivity of the mission. However, the relevance and use of such SOPE early on during the Mission Design Phase (MDP) is not sufficiently recognised. As a result, science operations planning is often neglected or poorly assessed during the mission definition phases. This can result in mission architectures that are not optimum in terms of cost and scientific returns, particularly for missions that require a significant amount of science operations planning. Consequently, science operations planning difficulties and cost underestimations are often realised only when it is too late to design and implement the most appropriate solutions. In addition, higher costs can potentially reduce both the number of new missions and the chances of existing ones to be extended. Moreover, the quality, and subsequently efficiency, of SOPE can vary greatly. This is why we also believe that the best possible type of SOPE requires a structure similar to the ones of existing bodies of expertise dedicated to the data processing such as the International Planetary Data Alliance (IPDA), the Space Physics Archive Search and Extract (SPASE) or the Planetary Data System (PDS). Indeed, this is the only way of efficiently identifying science operations planning issues and their solutions as well as of keeping track of them in order to apply them to new missions. Therefore, this paper advocates for the need to allocate resources in order to both optimise the use of SOPE early on during the MDP and to perform, at least, a feasibility study of such a more structured SOPE.