Closed cycle coolers for space applications

Single stage Stirling coolers providing refrigeration at around 80 K have been developed for space use and are now being produced commercially. Development work is now concentrating on multistage coolers for temperatures below 30 K. This paper describes results from a two stage cooler built at the Rutherford Appleton Laboratory and preliminary tests on a closed cycle 4 K cooler.     

Temporal decorrelation of X-band backscatter from wind-influencedvegetation

The temporal decorrelation characteristics of X-band radar backscatter from wind-influenced vegetation were investigated using a short-range CW radar. Radar reflectance data were gathered on various types of individual trees from a distance of approximately 30 m. The windspeed was monitored during each measurement, which lasted 5 s. The crown cover and the mean leaf area of the trees were also recorded. Autocovariance plots were generated for each measurement, from which the decorrelation time was estimated. As expected, the return signals decorrelated faster at higher wind speeds. However, the decorrelation time was also found to depend on the tree type, tree structure, and leaf cover characteristics. Measured decorrelation times for moderate winds (7-9 m/s) were often between 40-60 ms, although the lowest decorrelation time measured under these conditions was 14 ms for the Eastern Cottonwood. In lighter winds (1-4 m/s), decorrelation times were much longer, and there was substantial spread in the data     

Megahertz power converters for specific power systems

Some of the problems in the development of pulsewidth power converters when the switching frequency is increased from hundreds of kilohertz to tens of megahertz are highlighted. The major goal is the establishment of a ten megahertz power chain designed to operate in a distributed system from a DC power bus of 24 to 48 V. Available components and materials are discussed, and possible topologies-flyback, forward, push-pull forward, and buck converters-are examined. The performance criteria chosen for this analysis are, in the order of preference, output requirements, size and weight, efficiency, and cost     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

AI techniques in uninhabited aerial vehicle flight

This describes the development of an application of artificial intelligence (AI) for unmanned aerial vehicle (UAV) control. The project was part of the requirements for a class in AI at NOVA Southeastern University and a beginning project at NASA Wallops Flight Facility for a resilient, robust, and intelligent UAV flight control system. A method is outlined which allows a base level application for applying an artificial intelligence method, fuzzy logic, to aspects of control logic for UAV flight. One element of UAV flight, automated altitude hold, has been implemented and preliminary results displayed.     

A global HF telecommand system for long duration balloon flights

An HF telecommand system for the control of long duration balloon flights at any point on the globe is described. The system proposed consists of a network of low-power transmitters operating at the same carrier frequency. The choice of transmitter frequency, power and location are presented. Control of the transmitters may be performed remotely by means of the public switched telephone network; an assessment of the error-rate in the system as a whole is given.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

An advanced flight control and navigation system implementation fortactical helicopters

US Army helicopters that will allow single-crewmember operability in tactical environments require a high degree of automation. A tightly integrated flight control and navigation system has been studied. An architecture is discussed which meets anticipated flight control and navigation requirements, at an acceptable weight, using techniques of functional and physical integration. The architecture maximizes the sharing of sensor and computational resources in a flight critical environment and uses modular equipment packaging, dual fault-tolerant tetrad ring-laser-gyro inertial measurement units, and triplex self-checking processor pair-based flight critical processing channels     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

Determining rotation rates from light curves: RW Mon and RW Tau

We present light curve solutions for the non-synchronously rotating Algols RW Mon and RW Tau, and we illustrate how rotation rates are determined from light curves. We find RW Mon's primary component to spin at about 5 times the synchronous rate, which confirms the indication of fast rotation from reported emission line activity. RW Tau turns out to be only a mildly rapidly rotating Algol system, and our light curve solutions do not yield any firm value for the rotation rate of the primary component. It is suggested that continued efforts should be made to do good quality line broadening studies in order to find rotation rates for systems with only modest degrees of rapid rotation, and in order to further test photometric rotation rates against those of line broadening studies.