Optical guidance for autonomous landing of spacecraft

An autonomous rendezvous guidance scheme for spacecraft to descend to small celestial bodies by using optical information is presented. First, a new guidance, navigation, and control (GNC) method based on fixation-point (FP) inheritance is proposed. A spacecraft can safely descend toward the target point on the celestial body by tracking and autonomously renewing the FPs on the surface. Next, we deal with the method of extracting the FPs. A spatial band-pass filter (BPF) is applied to pictures taken to enhance features having comparable size with the tracking window. Local variance of the filtered image is used as a criterion of the extraction. Then, the relative information between the spacecraft and the celestial body (position, velocity, attitude, etc.) is calculated from the image coordinates and the range measurements of the FPs from the spacecraft. To suppress observation noise and improve navigation accuracy, an application of the extended Kalman filter is also presented. Finally, simulations are conducted to verify the guidance precision and the fuel consumption of the proposed guidance scheme     

Bridging the gap between ATLAS and C: an open-systems approach toTPS re-host

As the DoD focuses on commercialization and open-architecture standards, the need to migrate existing TPSs from proprietary ATLAS-based platforms to an Open Systems platform becomes more critical. This paper will focus on a solution which leverages COTS software tools and emerging industry standards and technologies to implement object-oriented database tools which enable the conversion of an ATLAS TPS to an ANSI C environment     

Observations of loops and prominences

We review recent observations by the Yohkoh-SXT in collaboration with other spacecraft and ground-based observatories of coronal loops and prominences. These new results point to problems that SoHO will be able to address. With a unique combination of rapid-cadence digital imaging (32 s full-disk and 2 s partial-frame images), high spatial resolution (2.5 arcsec pixels), high sensitivity (EM 10⁴² cm^–3), a low-scatter mirror, and large dynamic range, SXT can observe a vast range of targets on the Sun. Over the first 21 months of Yohkoh operations, SXT has taken over one million images of the corona and so is building up an invaluable long-term database on the large-scale corona and loop geometry. The most striking thing about the SXT images is the range of loop sizes and shapes. The active regions are a bright tangle of magnetic field lines, surrounded by a network of large-scale quiet-Sun loops stretching over distances in excess of 10⁵ km. The cross-section of most loops seems to be constant. Loops displaying significant increase in the ratio of the footpoint to loop-top diameter () are the exception, not the rule, implying the presence of widespread currents in the corona.All magnetic structures show changes. Time scales range from seconds to months. The question of how these structures are formed, become filled with hot plasma, and are maintained is still open. While we see the propagation of brightenings along the length of active-region loops and in X-ray jets with velocities of several hundred km/s, much higher velocities are seen in the quiet Sun. In XBP flares, for example, velocities of over 1000 km/s are common. Active-region loops seem to be in constant motion, moving slowly outward, carrying plasma with them. During flares, loops often produce localized brightenings at the base and later at the apex of the loop. Quiescent filaments and prominences have been observed regularly. Their coronal manifestation seems to be an extended arcade of loops overlying the filament. Reliable alignment of the ground-based data with the X-ray images make it possible to make a detailed intercomparison of the hot and cold plasma structures over extended periods. Hence we are able to follow the long-term evolution of these structures and see how they become destabilized and erupt.     

Stellar flares

Radio and X-ray observations of stellar flares provide the most direct probes of energy relaase particle acceleration, and energy transport on stars other than the Sun. In this review, the observational basis for our understanding of the flare phenomenon on other stars is briefly described and outstanding interpretive and theoretical issues are discussed. I shall confine my attention to objects which are solar-like, to the extent that they possess deep convective envelopes and display activity which is presumed to be magnetic in origin. These include pre-main sequence objects, classical flare stars, and close binaries. Future directions are briefly discussed.     

The Freja ultraviolet imager

Auroral images acquired by satellite instrumentation have proven to be a crucial component of the scientific equiry into the physical processes of the Earth's magnetosphere. TheFreja mission provided an opportunity to extend these measurements into the temporal and spatial regime commonly associated with ground-based optical imagers. Employing the basic procedure used successfully in theViking program allowed image repetition rates of 6 s to be achieved with simultaneous exposure of all pixels within the field-of-view. Typical exposure times of 0.3 s required development of an improved image intensifier system and operational requirements resulted in image formats covering approximately one-third of a spin. Simultaneously exposing two broad-band UV cameras, the instrument generates in its normal operational mode 264.6 kbytes per image pair. Results from initial operations confirm the design approach and suggest such imagers can be routinely included on challenging low cost missions such asFreja.     

Modeling of dynamic evolution of coronal loops

Parameters of expanding magnetic loops and arches and of mass flows generated by them in the corona have been computed in a 1D two-fluid approximation. Two possible trigger mechanisms of the coronal transients have been considered: (i) sudden increase of the background magnetic field strength, and (ii) heating and compression plasma inside these magnetic structures. We discuss the formation of shock waves and their dependence on dynamics and geometry of the magnetic structures.     

Steady-state analysis and design of a switched-capacitor DC-DCconverter

A representative switched-capacitor DC-DC converter topology is presented, circuit operation is explained, and control strategies are identified. State-space averaging is used to analyze steady-state performance and to develop control criteria and design equations. The analytical results are verified by SPICE simulation     

Small-Signal Model for the Series Resonant Converter

The results of a previous discrete-time model of the series resonant dc-dc converter are reviewed and from these a small signal dynamic model is derived. This model is valid for low frequencies and is based on the modulation of the diode conduction angle for control. The basic converter is modeled separately from its output filter to facilitate the use of these results for design purposes. Experimental results are presented.     

Adaptive Forward Error Control for Digital Satellite Systems

Two hybrid schemes of time-frequency resource sharing to increase the rain margin of Ku-and Ka-band satellite systems are proposed. Scheme 1 requires sharing a small pool of bandwidth for adaptive forward error control coding, sharing a small pool of time frame for rate reduction, and sharing a portion of low frequency time-division multiple access (TDMA) back-up frame for downlink transmission to the rain affected stations. Scheme 2 utilizes variable rate modulation and forward error correction, shares a small pool of time frame for rate reduction, and shares a portion of low frequency TDMA back-up frame. Effective usable capacities of the system using these schemes are calculated. Distribution of resources in order to maximize the effective usable capacity is also analyzed. The results obtained are compared with other adaptive schemes. Preliminary analysis shows that the utilized capacity of scheme 1 exceeds 99 percent of the effective usable capacity possible if it never rains for an outage of 0.05 percent and fade margin of 2.5 dB. For scheme 2 similar performance is achievable at a fade margin of 1.5 dB. For higher outage objectives the loss of effective utilized capacity is higher for scheme 2.     

The Proper Computation of the Matrix Pseudoinverse and its Impact in MVRO Filtering

There have been two new algorithms of fairly recent origin offered for the calculation of the matrix pseudoinverse. Unfortunately, nonpathological counterexamples can be constructed, as offered herein, that demonstrate the questionable nature of these two algorithms; however, a resolution is offered here to help prevent possible uncritical propagation of the questionable algorithms. As a rigorous alternative, a well-established technique (endorsed by numerical analysts) is reviewed for calculating the correct matrix pseudoinverse using a computer. Additionally, this technique possesses existent independently verified/validated and assessible software code for a convenient implementation. However, historical loose ends in calculating the associated condition number are singled out here as cause for concern and as a topic for future resolution and refinement. Finally, as the primary motivation for considering these issues, an application example is offered from estimation theory in the implementation and analysis of a minimum variance reduced-order (MVRO) filter having proper performance that critically hinges on the correct computation of the matrix pseudoinverse. While examples of applying MVRO to navigation applications were provided almost a decade ago, a clear indication of the somewhat restrictive conditions of applicability were wanting and so are elucidated here since there appears to be a resurgence of interest in this analytic technique. Another contribution is in providing a tally of the drawbacks to be incurred in using MVRO as well as its previously publicized benefits.