Closed cycle coolers for space applications

Single stage Stirling coolers providing refrigeration at around 80 K have been developed for space use and are now being produced commercially. Development work is now concentrating on multistage coolers for temperatures below 30 K. This paper describes results from a two stage cooler built at the Rutherford Appleton Laboratory and preliminary tests on a closed cycle 4 K cooler.     

Megahertz power converters for specific power systems

Some of the problems in the development of pulsewidth power converters when the switching frequency is increased from hundreds of kilohertz to tens of megahertz are highlighted. The major goal is the establishment of a ten megahertz power chain designed to operate in a distributed system from a DC power bus of 24 to 48 V. Available components and materials are discussed, and possible topologies-flyback, forward, push-pull forward, and buck converters-are examined. The performance criteria chosen for this analysis are, in the order of preference, output requirements, size and weight, efficiency, and cost     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Convective motions in liquid metals for material processings. Numerical simulation of oscillation regimes and effect of rotation

The paper is concerned with the numerical simulation and the analysis of some kinds of flow regimes which can develop in Bridgman and Czochralski systems for material processings. The flows in the liquid phase are investigated considering two-dimensional and axisymmetric models. The time-dependent regimes were studied for a zero-Prandtl-number fluid layer confined inside a two-dimensional cavity of aspect ratio (length-to-height) A=4, involving a stress-free upper surface and submitted to a horizontal temperature gradient. The range of Grashof number was varied up to the conditions at which the flow goes from oscillatory to chaotic type behaviours. The combined influence of the temperature gradients and of the rotations of the crucible and of the seed/crystal was investigated for a Czochralski model. The axisymmetric regimes were studied for a Pr_m=0.015 liquid melt confined inside a cylindrical crucible of aspect ratio (height-to-radius) A_m=2, and coupled to a viscous encapsulant liquid layer (10<Pr_e<1200) of aspect ratio A_e=0.5. A number of steady and (transient) time-dependent flow patterns are identified.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

An advanced flight control and navigation system implementation fortactical helicopters

US Army helicopters that will allow single-crewmember operability in tactical environments require a high degree of automation. A tightly integrated flight control and navigation system has been studied. An architecture is discussed which meets anticipated flight control and navigation requirements, at an acceptable weight, using techniques of functional and physical integration. The architecture maximizes the sharing of sensor and computational resources in a flight critical environment and uses modular equipment packaging, dual fault-tolerant tetrad ring-laser-gyro inertial measurement units, and triplex self-checking processor pair-based flight critical processing channels     

Potential defense applications of expert systems

The authors provide an overview of expert systems and how they may effect the development of future defense applications. Military uses of computers are outlined, and expert-systems fundamentals are described. Artificial research and development efforts by the military are examined, and potential military applications are discussed. Expert systems efforts at NASA, by the US Air Force, and for the Strategic Defence Initiative are considered     

ESA microgravity payloads for the 1990s

Analysis of flight opportunities of existing and new microgravity multi-user facilities on Eureca and Spacelab and design studies of new experimental facilities for Columbus are presently in progress.

The materials and fluid sciences research community is likely to be a major user of the permanently manned Space Station/Columbus elements such as the European Attached Pressurised Module (APM) and the Man-Tended Free Flyer (MTFF).

In metallurgy, crystal growth and bioengineering initial research will be performed in the manned laboratory, whereas later on the processing will be automated and executed on unmanned platforms.

At present ESA prepares - in close cooperation with the scientific community - the hardware development of microgravity experimental facilities/laboratories for all Columbus elements through design studies. Preliminary studies which have been carried out to date are the following : Crystallisation Laboratory, Fluid Sciences Laboratory, Containerless Processing Laboratory, Thermophysical Properties Measurement Facility, Metallurgy Laboratory.

In 1998 it is planned to deepen these studies covering laboratories for the APM and for the MTFF. Details on flight opportunities in the pre-Columbus period will also be provided.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

Non-linear resonant excitation of whistler mode waves in the Earth's ionosphere

We examine the resonant non-linear interaction in the Earth's ionosphere of two powerful high frequency radio beams with frequencies f ₁ and f ₂ (both larger than the plasma frequency at F2_max) and wave numbers k ₁ and k ₂ such that a whistler mode wave can be excited with a frequency f ₃ = f ₁ — f ₂ and a wave number k ₃ = k ₁ – k ₂. The feasibility of an effective ground based installation, sited at low latitudes, is discussed and the field strength of the wave emerging from a 10 km wide ionospheric region illuminated by the beams is evaluated for a range of transmitted frequencies, beam orientations and plasma frequencies in the interaction region. It is suggested that the longitude dependence of the enhancement of VLF noise bands detected by the Ariel 3 satellite may be due to a non-linear interaction of this type between any two or more medium wavelength signals from areas where there is a high concentration of commercial broadcasting stations, such as the NE region of the U.S.A.