Simulation and analysis of chemical release in the ionosphere

Ionospheric inhomogeneous plasma produced by single point chemical release has simple space-time structure, and cannot impact radio wave frequencies higher than Very High Frequency (VHF) band. In order to produce more complicated ionospheric plasma perturbation structure and trigger instabilities phenomena, multiple-point chemical release scheme is presented in this paper. The effects of chemical release on low latitude ionospheric plasma are estimated by linear instability growth rate theory that high growth rate represents high irregularities, ionospheric scintillation occurrence probability and high scintillation intension in scintillation duration. The amplitude scintillations and the phase scintillations of 150?MHz, 400?MHz, and 1000?MHz are calculated based on the theory of multiple phase screen (MPS), when they propagate through the disturbed area.     

Interference torque of a three-floated gyroscope with gas-lubricated bearings subject to a sudden change of the specific force

A numerical study is carried out to investigate the influence of a sudden change of the specific force on a three-floated gyroscope with a rotor supported on gas-lubricated bearings.The interference torque is calculated to evaluate the influence by modeling the transient behavior of the rotor-bearing system. In combination with dynamic equations of the rotor displacement,the Reynolds equation is solved on the surface of spiral-grooved conical bearings. It is assumed that a steady state has been obtained with a constant specific force, and then the specific force is suddenly changed and maintained constant after that. Responses of the sudden change are obtained by solving the equations. Numerical results show that the direction of the sudden change of the specific force is the main factor which influences the interference torque curve. With a sudden change along the input direction, the interference torque fluctuation has a constant frequency and a decreasing amplitude. With a sudden change along the output direction, the interference torque fluctuates in a small range. With a sudden change along the spin direction, the change of the interference torque combines a fluctuation and a gradually-changing quasi-equilibrium value. This study provides a supplement to the steady-state error model of the three-floated gyroscope.     

航天器时态规划技术研究进展

结合航天器自主运行的迫切需求,阐述了航天器任务规划问题给智能规划技术带来的挑战,并重点分析了具有时间属性的规划方法研究必要性。给出航天器时态规划定义,分别总结了状态空间时态规划建模方法和基于时间线的时态规划建模方法,并给出时态规划知识模型关键元素定义。根据规划方法发展现状,归纳总结前向链、模型转换、规划空间规划和分层任务网络四种方法在时态规划技术方面的特点和研究进展,着重描述各种方法对规划中时间要素的处理。在对目前的航天器时态规划技术发展趋势总结分析基础上,给出了未来航天器时态规划技术的发展建议。     

低轨卫星缺失时序数据的模式识别方法

在航天应用中，低轨卫星经常会由于原始数据缺失而影响卫星时序数据模式识别结果，降低准确率。针对该问题提出了一种新型MR-GRU模型，可有效处理缺失时序数据，并获得较好的模式识别准确率。区别于传统模型的补全缺失数据的方法，MR-GRU模型直接在缺失时序数据上运用循环神经网络进行训练，对传统门控循环单元结构进行了改进，增加了两个新变量：掩蔽项和衰减项。掩蔽项作用于输入，衰减项作用于输入和隐层单元输出。MR-GRU模型不仅能够保持时序数据固有的时间特性，还能有效提高模式识别精度。在卫星时序数据上的模式识别试验表明，MR-GRU模型准确率优于传统模型。     

期望状态序列导向的深空探测器规划修复方法

Aiming at the challenges caused by the persistence, concurrency and energy consumption of probe actions, a plan repair method of deep space probe based on the expected state sequence is proposed. In this method, the expected state sequence is formed of the expected effect of the unfinished action and the expected precondition of the unexecuted action in the pre designed plan, according to the execution status of the action. The expected state sequence is an ordered set of states with mixed logic and energy, providing subgoals for plan repair and also transforming the plan repair problem into the state transition path searching problem. During the search, the plan repair strategy with energy supply priority is proposed, which separates the logic repair from energy repair to reduce the difficulty of solving the problem. And this method enables the probe to recover from plan failure autonomously. Finally, the effectiveness and rationality of the proposed method are verified through simulation by taking the Mars Orbiter as an example.     

纳米碳粉掺杂对激光烧蚀GAP的推进性能影响

实验以含能聚合物聚叠氮缩水甘油醚(Glycidyl azide polymer,GAP）作为激光烧蚀微推力器的靶材。通过对不同浓度纳米碳粉掺杂和靶材厚度下激光烧蚀GAP的比冲、冲量耦合系数和能量转化效率测量，结合靶材喷射羽流图像，分析了纳米碳粉掺杂提高激光烧蚀聚合物靶材推进性能的机理，给出纳米碳粉掺杂的适用方式。实验结果表明：透射式下，掺杂纳米碳粉之后，聚合物对激光的吸收大幅增强，但激光烧蚀推进性能不随掺杂浓度增加而显著提升；纳米碳粉吸收激光能量形成温度极高的局部热区促进聚合物中化学能的释放，是推进性能提升的主要原因；掺杂纳米碳粉之后的GAP烧蚀深度降低，表现出面吸收特性；随着靶材厚度的增加，未完全烧蚀的工质质量增加，使得靶材的利用率大大降低，导致聚合物推进性能下降。实验中掺杂3%纳米碳粉、厚度为54 μm的GAP靶材最优能量转化效率超过250%，适合作为透射式激光烧蚀微推力器的靶材。     

基于数字孪生的智能脉动管控

为提升飞机总装脉动生产线智能化水平,开展了基于数字孪生的智能脉动管控研究。基于数字孪生五维模型理论构建了飞机总装脉动生产线数字孪生应用架构,从反应式计划调度、物流精准配送、智能作业指导、产线健康监视、资源迭代优化配置5个方面开展了技术研究,为复杂产品装配的智能制造应用提供参考。     

The propagation features of LF radio waves at topside ionosphere and their variations possibly related to Wenchuan earthquake in 2008

The artificial low frequency (LF) signals recorded at topside ionosphere from DEMETER satellite were analyzed in this paper, and the typical diurnal and seasonal variations were illustrated around 162?kHz in electric field spectra. The larger power spectrum density (PSD) values in electric field at local nighttime and in winter season all demonstrate the correlation feature of lower plasma content to higher penetration of LF waves into ionosphere. Around Wenchuan earthquake, the comparison of signal-noise-ratio (SNR) values in electric field with each half month during January to May in 2008 and the same half month in May from 2005 to 2007 revealed their lowest values and small covering area around the preparation region of Wenchuan earthquake in 2008. Combined with other researches in VLF radio waves and geochemical observations from satellite, the interaction of ion accumulation and upward movement from gas-water release at surface might be a key factor to disturb the ionospheric plasma density, and then possibly leading to the decrease of low energy penetration of LF radio waves from the artificial transmitted source at ground.     

高温环境下大尺度薄壁结构的电性能优化设计

考虑温度引起的热变形和材料电磁参数变化对天线罩电性能的影响,基于口径积分-表面积分法(AI-SI)和有限元法(FEM),提出了高温环境下天线罩电性能分析方法;进而基于粒子群算法(PSO),建立了计及热效应的天线罩结构电性能优化流程。分别选取常温环境、均匀高温环境和非均匀高温环境三种典型工况,对比研究了温度对天线罩电性能的影响规律,并对天线罩电性能进行了优化,研究结果表明:高温会引起天线罩透波系数的下降和瞄准误差的上升,在天线罩优化设计中应重视温度对电性能的影响;计及热效应的天线罩结构电性能优化方法能显著提升天线罩的透波系数、降低瞄准误差,具有良好的优化效果。