A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.     

火箭橇体进水现象研究

在考核过载承受能力的火箭橇试验后,橇体内发现有水,从空气动力学的角度,对火箭橇体进水现象进行了初步分析,并利用FLUENT软件对进水原因进行了初步研究,通过分析,发现结构在穿越跨音速阶段时,由于内外压差的变化将导致内部或外部产生水汽。该发现为结构设计提供有益的建议。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

现代高效刀具发展特点和产业化途径

现代高效刀具和工具工业的发展特点 1 现代高效刀具的内涵 现代高效刀具是相对传统标准刀具而言的.传统的工具工业以生产供应标准化、通用化的刀具为基本特点.长期以来,制造业有一种共识:除了少量特殊需要,尽量选用标准刀具.标准刀具虽然性能不是最优,但因经济实用而被广泛接受.但到20多年前,这种观念在发达国家开始发生变化.     

航天器安全防护保障探讨

把对航天器安全的威胁分为硬和软两大类，分析了对航天器产生威胁的类别，以及为保证航天器安全而需要采取的措施。介绍了研究的内容，需要建设的空间信息对抗系统和空间信息探测网。     

一种GPS定位信息可用性的实时判定方法

基于GPS接收机输出数据,采用3级AR模型来预测下一时刻的GPS输出值,并与实际的输出值相比较,以一定的检测门限,判断当前时刻定位信息的可用性。通过仿真证明该方法的有效性,为GPS的可用性判定提供了一种方法。     

基于三机冷备份的遥感器计算机系统冗余设计

文章对当前比较流行的计算机冗余模型进行了分析和比较,制定出了三机冷备份的冗余计算机结构,并对关键电路进行了设计。     

一种主动悬架式火星车稳定裕度优化控制策略

针对火星车在非结构化环境下行驶存在的稳定性不足而导致倾覆的风险,提出针对一种六轮主动悬架式火星车的稳定裕度优化控制方法。首先,考虑了火星车悬架机构调整过程中车轮与接触地面滑移和侧倾等运动关系,建立和完善了六轮主动悬架式火星车行驶的运动学模型。然后,以火星车夹角调整机构角度为变量,推导火星车在非结构环境下的稳定裕度模型。之后,使用内点法求解火星车稳定裕度的最优解,并获得期望的夹角调整机构关节角度。在此基础上,对夹角调整机构的关节角度进行规划和控制,实现火星车悬架机构构型的调整,从而提高火星车在非结构化环境下行驶的稳定裕度。最后,对火星车稳定裕度优化控制策略的有效性进行仿真验证,结果表明,所提出的控制方法可有效提高火星车在非结构化环境下行驶的稳定裕度。     

带轴对称台阶的圆锥高超声速边界层转捩试验

在Ma 6风洞内,通过高频脉动压力测试技术和基于纳米粒子示踪的平面激光散射(NPLS)技术,分别对带前向、后向轴对称台阶的圆锥高超声速边界层转捩进行了试验研究。采用功率谱密度分析和互相关计算等方法对脉动压力数据进行分析,得到了边界层中扰动波的发展规律,定量分析了第二模态波的相关参数。结果显示：两种模型中第二模态波在沿流向向下游发展的过程中,其幅值均先增大再衰减、特征频率均逐渐减小;特征频率和传播速度整体上均随雷诺数的增大而增加(后台阶模型中特征频率由100 kHz增至196 kHz,前台阶中则由 97 kHz 增至174 kHz)、波长变化规律则与之相反(后台阶中由6.35 mm降至4.54 mm,前台阶由7.35 mm降至 4.66 mm );后台阶模型中第二模态波初次出现位置比前台阶中更靠近上游,边界层转捩位置较前台阶前移。将NPLS结果与高频脉动压力测试结果进行对比,两者吻合较好。