规则回转体自动铺丝轨迹规划与丝束增减

为满足自动铺丝轨迹的满铺覆性要求，针对现阶段自动铺丝轨迹规划存在的不足，提出了不同的丝束增减算法。首先讨论纤维铺放方向的确定和中心轨迹数量的计算，设计不同铺放方向轨迹的生成算法。然后以丝束重叠系数为重要参数，对于纤维局部堆积和空缺问题提出单侧纤维裁剪算法和双侧纤维裁剪算法，并对裁剪后的重叠区域和间隙区域进行面积求解，使得纤维丝束均匀覆于芯模表面。最后基于CATIA CAA二次开发平台，将上述算法集成到纤维铺放CAD系统中，通过运动仿真系统验证算法的正确性。利用提出的丝束增减算法，实现了间隙/重叠区的均匀分布，尽量降低了富树脂区等相关缺陷的聚集对性能的不良影响。     

航空发动机叶片型面的旋流式光整加工实验研究

本文利用旋流式光整技术针对航空发动机叶片型面的光整加工进行实验研究,制定了叶片型面光整工艺路程,优选了磨料,设计了叶片光整实验用夹具。通过具体叶片型面和前后缘的光整实验验证了旋流式光整加工及其实验方案能够满足叶片型面和前后缘的设计要求,提高光整效率1倍以上,并且改善叶片型面的应力状态及其分布,从而大幅度提高叶片的疲劳寿命。     

旋翼着陆器在火星探测中的研究进展

旋翼着陆器是下一轮国际火星探测的重要发展方向.论文首先回顾了火星探测软着陆的发展概况,分析了旋翼着陆器的结构组成、火星探测工作原理及特点.其次,阐述了开展旋翼着陆器设计过程中所需的关键技术.     

BP网络进行0-9十个数字图像的识别

在BP算法和数字图像处理技术的基础上,本文在MATLAB软件环境下提取Word文档中26种字体的0-9十个数字的图像,使用MATLAB神经网络工具箱及图像处理工具箱进行数字的识别,给出了较详细的处理步骤及相关程序,并比较了各种识别算法的收敛速度和识别率。     

On the Acquisition Time for an Apollo Ranging Code

An Apollo ranging system is considered whose phase reference is obtained by a phase-locked loop for bit synchronization. The bit phase reference is noisy, and the error probability for the ranging code is shown to depend on the input signal energy per bit to noise density ratio. The procedure of computing the acquisition time for the ranging code is then presented and the acquisition time for a lunar ranging code is plotted versus the input signal-to-noise density ratio.     

空间电子攻击的体系作战效用及发展对策

通过分析空间电子攻击在打击对象多、方式灵活多样,打击速度快、隐蔽突然,效果等同于火力打击、太空安全隐患小等方面的优势,得出了"空间电子攻击具有很大的发展潜力,是未来空间对抗力量发展的重心"的结论。通过分析空间电子攻击在遮态势感知耳目、断信息分发链路、破精确打击能力、实施战略威慑方面发挥体系作战效用的机理,论证了空间电子攻击的体系作战效用。通过分析还提出空间电子攻击力量的发展对策。     

战术导弹的一种自校正控制

本文探讨自校正控制理论在战术导弹控制中的应用。采用一种渐近的最小方差自校正控制方案设计导弹自动驾驶仪回路。该方案通过设计自校正控制器的极点和可调增益,使控制器稳定,并能兼顾闭环系统的动态特性,也可使输出方差趋于最小。在两种参考输入信号情况下进行仿真,结果表明,与经典控制情况相比,该方案具有较强的抑制干扰能力,能克服参数变化对系统控制性能的影响,提高了系统的跟踪性能。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.