光纤嵌入法监测复合材料固化的研究

通过嵌入光纤对芳纶／五氧复合材料板及环氧树脂浇注体的固化进行初步研究，结果表明，光纤嵌入法能准确监测出浇注体及芳纶／环氧复合材料的瞬时固化情况。     

Success criteria and risk management for the new millennium program

The National Aeronautics and Space Administration (NASA) New Millennium Program (NMP) is a technology development and validation program that will flight-validate advanced, new technologies with space flight applications. NMP's purpose is twofold. First, it will develop technologies that will enable future spacecraft to be smaller, more capable and reliable, and to be launched more frequently. Second, it will validate the technologies in flight to reduce the risks to future science missions that fly these technologies for the first time. To measure the program's success, NMP has devised a set of criteria that stresses the relevance of technologies selected for flight validation to NASA's 21st-century science mission needs. Also, NMP has instituted a ‘risk management’ policy, where, through a combination of adequate resources and early risk assessment and risk mitigation plans for the technologies, the overall risk of the NMP flights can be rendered acceptable.     

Goals and preparation method for ground operations for the manned space flight Altair

The mission's success fully depends on the Payload Operations conducted during the space flight. The Ground Team has to be trained to assist the Space Crew, to replan the cosmonaut's activities when contingengies occurr onboard and to change or cancel Payload activities when required. In order to act efficiently during the mission, the Ground Team must be prepared in advance of the flight and able to operate special tools for tracking the mission's progress, anticipating problems and taking decisions in realtime.

This document sets out the approach for conducting such a preparation for Ground Operation. It will be focused on the Altaïr mission performed in July 1993 onboard the Russian Mir space station.     

Remote assistance experiment during the manned space flight Altair

This remote assistance trial, performed within the framework of the manned space flight Altaïr, was carried out by CADMOS (CNES), with the cooperation of the Sub-directorate of CNES Operational Systems, Medes, LBM of Tours and Christol Consultants. It consisted of supplying the cosmonaut performing the Orthostatism experiment (echograph acquisition) on board the Mir station with realtime assistance by an expert (LBM of Tours) working from the ground on the CADMOS premises. The various steps of the approach followed during the preparation phase are described, as well as the technical means of communication used between the Mir station and CADMOS.     

Ensuring equal access to the benefits of space technologies for all countries

There is a concern in the developing world that industrialized countries have not done all they might under Article 1 of the Outer Space Treaty to make the benefits of space technology available to all countries; some are now seeking codification of rights and responsibilities in this sphere. This article discusses recent debate on the issues by COPUOS and its Legal Subcommittee on whether an additional legal framework is necessary to ensure a fairer distribution of benefits. G77 countries were strongly in favour of some form of technology and information transfer, while industrialized countries favoured the existing practice of developing international cooperative space projects. The author believes that a new set of principles will be formulated in the next few years and that organizations like Intelsat and Inmarsat can provide valuable models for ensuring access through cooperative programmes.     

Main medical results of extended flights on space station Mir in 1986-1990

During 1986-1990 seven prime spacecrews (16 cosmonauts) have flown on-board the Mir orbital complex. The longest space mission duration was 366 days The principal objectives of the medical tasks were the maintenance of good health and performance of the spacecrews and conducting medical research programs which included study of the cardiovascular, motor, endocrine, blood, immune, and metabolic systems. Results obtained point to the ability of humans to readily adapt to a year-long stay in space and maintain good health and performance. Readaptation had a similar course as after other previous long-term space flights of up to 8 months in duration. Primary body system changes were not qualitatively different from findings after flights aboard the Salyut 6 and 7 space stations. In this case, during and after an 11-12 month flight, body system alterations were even less severe which was a result of adequate countermeasure use, their systematic and creative employment and maintenance of required environments to support life and work in space.     

Thermal resistance in satellite mounting plates due to conductive heat transfer

The thermal resistance due to conductive heat transfer between two heat generating boxes mounted symmetrically on a thin mounting plate, one side of which is subjected to a constant heat flux and the opposite side is convectively cooled, is considered. The other two sides are maintained at constant temperature. A numerical solution for the temperature field is obtained and the heat transfer between the boxes is found by integrating between the critical heat flow lines. Various nondimensional parameters are identified and their influence on the thermal resistance is studied.     

Orbital and relative motion of a tethered satellite system

A simplified model for the orbital and relative motion of a tethered satellite system is presented. The tether acts as a light elastic string with small structural damping but without bending stiffness. Its mass is taken into account in the calculation of the total kinetic and potential energies of the tethered system. This formulation allows the inclusion of the complete gravity gradient influence on the dynamics of the system. The resulting three-dimensional motion is separated in the centre of mass orbital motion on the one hand and the relative motion of the end-bodies on the other. No restrictions on length of the tether or on mass ratio of the end-masses are imposed. It is found that the frequencies and amplitudes of the longitudinal tether oscillations are realistic as long as the tether mass is less than that of the subsatellite.     

Aeroshell design techniques for aerocapture entry vehicles

A major goal of NASA's In-Space Propulsion Program is to shorten trip times for scientific planetary missions. To meet this challenge arrival speeds will increase, requiring significant braking for orbit insertion, and thus increased deceleration propellant mass that may exceed launch lift capabilities. A technology called aerocapture has been developed to expand the mission potential of exploratory probes destined for planets with suitable atmospheres. Aerocapture inserts a probe into planetary orbit via a single pass through the atmosphere using the probe's aeroshell drag to reduce velocity. The benefit of an aerocapture maneuver is a large reduction in propellant mass that may result in smaller, less costly missions and reduced mission cruise times. The methodology used to design rigid aerocapture aeroshells will be presented with an emphasis on a new systems tool under development. Current methods for fast, efficient evaluations of structural systems for exploratory vehicles to planets and moons within our solar system have been under development within NASA having limited success. Many systems tools that have been attempted applied structural mass estimation techniques based on historical data and curve fitting techniques that are difficult and cumbersome to apply to new vehicle concepts and missions. The resulting vehicle aeroshell mass may be incorrectly estimated or have high margins included to account for uncertainty. This new tool will reduce the guesswork previously found in conceptual aeroshell mass estimations.     

Electrostatic Noise Spectrum at the Electron Cyclotron Frequency and Electromagnetic Emission in the Inhomogeneous Plasma of the Topside Ionosphere

Measurements of the wave emission of the topside ionosphere made onboard the APEX satellite using the electric component of the wave field in the 0.1–10 MHz frequency band are presented. At middle latitudes a wave intensity decrease was observed in the broad-band spectrum of the electrostatic noise at the electron cyclotron frequency. It is shown that a break in the spectrum of electrostatic modes at the electron cyclotron frequency (the absence of the plasma eigen-frequencies) may be a cause of the observed effect. The increase of the intensity at the electron cyclotron frequency in the ionospheric trough and at latitudes above the trough region as compared to middle latitudes may be explained by the capture by plasma irregularities of the electromagnetic emission of the auroral electron fluxes.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 201–208.Original Russian Text Copyright © 2005 by Izhovkina, Prutensky, Pulinets, Kiraga, Klos, Rothkael.