Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

弹塑性梯度材料热机耦合分析的有限元方法

陶瓷/金属功能梯度材料(FGMs)的组份及性能梯度分布,在航空航天高温热结构中有重要应用。材料性能在空间上的连续变化给这类结构强度设计的有限元分析造成了一定困难,针对上述问题,提出一种热弹塑性梯度有限元方法。该方法通过编写有限元软件ABAQUS的材料用户子程序(UMAT)来实现,在UMAT中将FGMs的弹塑性本构模型参数定义为空间坐标的函数;用热弹塑性梯度有限元方法对陶瓷-FGMs-金属典型的三明治板结构进行热机械分析。结果表明:FGMs组分布函数对其热应力分布有很大的影响,特别是在三明治结构的界面上,影响更为突出,这和现有文献的实验结果相符。     

通用的航电系统总线接口仿真平台的设计和应用

针对当前航电系统仿真器的缺点,提出了一种通用的航电系统总线接口仿真平台的设计思想,通过建立仿真数据库,从待仿真的航电系统设备中的接口信息抽象出属性和行为,然后用数据库的方式来描述,实现了仿真软件和仿真对象的分离,从而使该仿真平台具备了通用性和灵活性。该仿真平台已经在某型机航电系统地面联试中得到了应用。     

Lower and Upper Ionosphere of Mars

The ionosphere of Mars has been explored mostly with the radio occultation experiment onboard Mariners 6, 7, 9; Mars 2, 3, 4, 6; Viking 1, 2, and more recently on Mars Global Surveyor (MGS) and Mars Express (MEX). In addition to the radio occultation experiment, MEX also carried Mars Advanced Radar for the Subsurface and Ionosphere Sounding (MARSIS) experiment which provided electron density profiles well above the main ionospheric peak. The atmosphere of Mars was measured directly by the neutral mass spectrometer onboard Viking 1 and 2 Landers. Later, an accelerometer and radio occultation experiment on MGS provided large data sets of atmospheric density at various locations in the upper and lower atmospheres of Mars, respectively. In this paper we review results of these upper and lower atmospheric/ionospheric measurements. Results of these measurements have been compared with theoretical models by several workers; therefore, we also review various atmospheric and ionospheric models of Mars.     

基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

Power anomaly effects and costs in low-voltage mobile power systems

Electric power anomalies or disturbances can disrupt the normal operation of equipment, accelerate aging, or even cause outright failures thus resulting in increased costs of maintenance and reduced system reliability. Past research on the effects caused by power anomalies has been mostly focused on industrial, commercial, or residential systems, or on power distribution equipment. A literature survey reveals that there is no comprehensive review related to low-voltage (LV) power systems and utilization equipment applicable to military combat vehicles, such as aircraft and ships. This paper summarizes the results of a new literature survey that focused on the causes, effects, and mitigation methods for power anomalies typical of LV mobile power systems. Electric power anomaly cost data collected from the literature are also presented, from which the costs of anomalies to the national defense are estimated using some simple rationales.     

Modeling and Optimal Design of Planar Linkage Mechanism of Coupled Joint Clearances for Manufacturing

The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.     

空乘大学生心理健康现状调查与对策分析

心理健康对于学生的成长成才具有至关重要的作用。文章针对飞行学院2009级和2010级空乘专业学生进行了心理健康现状调查,分析了目前学院学生的心理健康整体水平和成长需求,为学院在制订学生心理健康培养对策时提供理论参考。     

运载火箭/航天器耦合分支模态综合法(下)

将运载火箭作为主结构、航天器作为分支子结构,分别采用自由界面模态展开定理和固定界面模态展开定理,导出分支模态综合法,进行运载火箭/航天器组合模型响应分析。进而,采用界面约束模态质量的界面加速度,导出航天器载荷估计方法,这时的运载火箭与航天器连接界面可以是静定的或静不定的。当仅考虑连接界面是静定的情况,界面约束模态质量将退化为界面刚体质量,导出采用刚体界面加速度的航天器载荷估计的方法,这个方法所导出的公式与Chen的方法完全相同,而Chen方法的公式是由有限元法导出的。提出一种航天器载荷瞬态分析新技术:一个以前的运载火箭/航天器组合系统的载荷分析结果可以用来获得被相同的运载火箭发射的新航天器结构的动态载荷,这种方法比Chen的"恢复瞬态分析"方法更简便。     

双重稀疏保持投影(英文)

稀疏保持投影(Sparsity preserving projection,SPP)是一种新型的基于图的降维方法,近年来被成功应用于人脸识别。SPP基于数据的稀疏重建关系建图,从而包含自然的判别信息。然而,经SPP变换后,新的特征是所有原始特征的线性组合,因此很难解释其降维结果。为此,提出了一种新的降维方法——双重稀疏保持投影(Dual-sparsity preserving projection,DSPP),通过进一步对SPP的投影方向施加稀疏约束,希望获得投影方向的稀疏解。具体地,该方法把SPP中投影函数的计算转化为一个回归类优化问题,然后借助L1正则化回归技术获得稀疏投影向量。在人脸数据上的实验结果表明了该算法的有效性。