ATE enabling technologies

A discussion of the current and emerging core technologies and philosophies that will enable Air Force personnel to quickly, accurately and intuitively diagnose faults in increasingly complex systems     

Ultra-wideband ground-penetrating radar for the detection of buriedmetallic mines

The suitability of ultra-wideband ground-penetrating radar as a tool for the detection of buried metallic mines is explored in this paper. The analysis centers around a 200-800 MHz, dual-polarized ground penetrating radar (GPR) designed and built by SRI International. The analysis consisted of fusing the images from the dual polarizations into a single image to enhance the target objects and suppress clutter. Results are shown for several variations of a Mahalanobis-based fusion technique, and “soft decision” minefield detection results based upon Monte Carlo statistical techniques are also presented. Although relatively few scenes were analyzed, these results show that the dual-polarized GPR is potentially very effective at finding buried mines and minefields     

Venus Express: Scientific goals, instrumentation, and scenario of the mission

The first European mission to Venus (Venus Express) is described. It is based on a repeated use of the Mars Express design with minor modifications dictated in the main by more severe thermal environment at Venus. The main scientific task of the mission is global exploration of the Venusian atmosphere, circumplanetary plasma, and the planet surface from an orbiting spacecraft. The Venus Express payload includes seven instruments, five of which are inherited from the missions Mars Express and Rosetta. Two instruments were specially designed for Venus Express. The advantages of Venus Express in comparison with previous missions are in using advanced instrumentation and methods of remote sounding, as well as a spacecraft with a broad spectrum of capabilities of orbital observations.     

The Motion of Coaxial Bodies of Varying Composition on the Active Leg of Descent

The motion of a spacecraft (SC) with double rotation and variable mass on the active leg of its descent is considered. The SC consists of two coaxial bodies. The coaxial scheme is used for gyroscopic stabilization of the SC longitudinal axis by the method of partial spin-up. The equations of spatial motion of coaxial bodies of varying composition are derived and approximate solutions for the angles of spatial orientation are found. The condition of decreasing amplitude of nutation oscillations is obtained, which allows the estimation of efficiency of the stabilization by partial spin-up. The errors in the magnitude and direction of the vector of braking thrust are also determined.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 224–232.Original Russian Text Copyright © 2005 by Aslanov, Doroshin, Kruglov.     

The observation of the galactic anticenter region by the balloon borne gamma-ray telescope Natalya-I

This paper presents the results of measurements of gamma radiation with energies above 5 MeV, from the galactic anticenter region. The balloon-borne gamma ray telescope “Natalya-I”, was launched on 6 November, 1980 from the Tata Institute of Fundamental Research's Balloon Facility (Hyderabad, India) and reached ceiling altitude of 35 km. The results on the accelerator calibration of the telescope, using a “tagged” gamma ray beam are also presented.     

Concatenated Sequences for Spread Spectrum Systems

Concatenated sequences are suggested and developed for use in spread spectrum (SS) systems. Special receiver realization is discussed and it is shown that the concatenated sequences offer great advantage in reducing the size of the matched filter correlators (MFC) in the SS receiver. Experimental systems have been built using concatenated sequences and their performance is reported here. It has been shown that a processing gain of 60 is obtainable with a 15 × 4 concatenated sequence which requires three tapped delay lines (TDL), two of length 15 and one of 4. Thus a total of only 34 delay units (with a nonlinear interface network, only 19 delay units) are required. Teleprinter signals can be transmitted over telephone channels using a bandwidth (BW) expansion of 60 with an input signal-to-noise ratio (SNR) of only -5.1 dB, resulting in a character- error-rate of 1 in 103. Techniques have been developed to reduce the sidelobe levels in the aperiodic autocorrelation functions (ACF) of the pseudonoise (PN) codes. For 15 length and 7 length PN sequences, sidelobes are reduced by 9 dB and 9.4 dB, respectively, using transversal filters. Application of the SS systems to the problem of multiaccessing and antijamming are discussed.     

The instrument IKS and its calibration

The IKS infrared spectro-photometer will fly on board the VEGA platforms. It is designed to characterize the size, temperature and emissivity of the Comet Halley nucleus, to identify the major gaseous components of the inner coma and to detect the emission of the cometary grains. This paper presents the “calibration” experiments required to reduce the raw data: (i) absolute wavelength calibration of the filter wheels; (ii) modeling of the internal signal, as a function of the temperature of the different sub-systems; (iii) absolute and spectral responsivities of each of the spectrometric and photometric channels, as a function of the wavelength and position of the source in the field of view. Finally, we shall indicate the expected S/N ratios.     

What you thought you knew about motion sickness isn't necessarily so

Motion sickness symptoms, stimuli, and drug therapy are discussed. Autogenic feedback training (AFT) methods of preventing motion sickness are explained. Research with AFT indicates that participants who had AFT could withstand longer periods of Coriolis acceleration, participants with high or low susceptibility to motion sickness could control their symptoms with AFT, AFT for Coriolis acceleration is transferable to other motion sickness stimuli, and most people can learn AFT, though with varying rates of learning.     

Tracking the Frequency Translation of a Sum of Orthogonal Sinusoids

The maximum likelihood approach is used to derive a method for estimating and tracking the frequency translation of a signal consisting of a sum of orthogonal sinusoids corrupted by additive white noise. The likelihood function is reduced to an equivalent statistic expressed in terms of the squared magnitude of the finite Fourier transform of the received signal. A function that generates an error signal for a frequency translation tracking loop is derived, and a method of generating the error signal using the discrete Fourier transform (DFT) of the received signal weighted by a linear ramp is suggested. Two noise-free examples are presented.