Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

Response of the EIA ionosphere to the 7-8 May 2005 geomagnetic storm

In this paper, response of low latitude ionosphere to a moderate geomagnetic storm of 7–8 May 2005 (SSC: 1920 UT on 7 May with Sym-H minimum, ∼−112 nT around 1600 UT on 8 May) has been investigated using the GPS measurements from a near EIA crest region, Rajkot (Geog. 22.29°N, 70.74°E, Geomag.14°), India. We found a decrease in total electron content (TEC) in 12 h after the onset of the storm, an increase during and after 6 h of Sym-H deep minimum with a decrease below its usual-day level on the second day during the recovery phase of the storm. On 8 May, an increase of TEC is observed after sunset and during post-midnight hours (maximum up to 170%) with the formation of ionospheric plasma bubbles followed by a nearly simultaneous onset of scintillations at L-band frequencies following the time of rapid decrease in Sym-H index (−30 nT/h around 1300 UT).     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

Approaches in the determination of plant nutrient uptake and distribution in space flight conditions.

The effective growth and development of vascular plants rely on the adequate availability of water and nutrients. Inefficiency in either the initial absorption, transportation, or distribution of these elements are factors which impinge on plant structure and metabolic integrity. The potential effect of space flight and microgravity conditions on the efficiency of these processes is unclear. Limitations in the available quantity of space-grown plant material and the sensitivity of routine analytical techniques have made an evaluation of these processes impractical. However, the recent introduction of new plant cultivating methodologies supporting the application of radionuclide elements and subsequent autoradiography techniques provides a highly sensitive investigative approach amenable to space flight studies. Experiments involving the use of gel based 'nutrient packs' and the radionuclides calcium-45 and iron-59 were conducted on the Shuttle mission STS-94. Uptake rates of the radionuclides between ground and flight plant material appeared comparable.     

Identification of nonlinear flight dynamics: theory and practice

This article presents an innovative time-domain nonlinear mapping-based identification method. The method reported is applied to identify the unknown parameters of multivariable dynamic systems which are mapped by nonlinear differential equations. A systematic identification method is introduced, and a novel algorithm is developed using nonlinear error maps. An analysis of parameter convergence is provided and the regions of convergence can be found using the second method of Lyapunov. Innovative nonquadratic Lyapunov functions are designed and used. Analytical and numerical studies are performed to illustrate and validate the identification concept. The unsteady flight of a high-alpha aircraft in the longitudinal axis is chosen as a nonlinear case study. The unknown parameters are identified. Simulation results show that the model dynamics match the experimental data. The reported example demonstrates that the time-domain nonlinear mapping-based identification method ensures robustness and reduces major shortcomings in stability, convergence, and computational efficiency compared with other algorithms available     

Zinc air fuel cell for industrial and specialty vehicles

Metallic Power has demonstrated a regenerative zinc air fuel cell for applications in industrial and specialty vehicles. The fuel cell uses zinc pellets and atmospheric oxygen to generate electric current; the reaction product is zinc oxide, which is collected in a tank. In its present stage of development the 36 V fuel cell will deliver approximately 6 kWh, with a maximum power of 4 kW. The device is refueled at a zinc recycling/refueling station where zinc pellets are pumped into each cell; ZnO is pumped from the tank and replaced with KOH electrolyte. The recycling/refueling unit uses an electrolytic process to convert zinc oxide powder into zinc pellets     

Fiber-optic gyros and quartz accelerometers for motion control

In article the opportunity of use strapdown inertial navigation system (SINS) on the base of fiber-optic gyroscopes and quartz accelerometers corrected from star sensors and satellite navigation equipment (SNE) for perspective interplanetary spacecrafts motion control on phases of interplanetary trajectory insertion, trajectory correction, and braking during transition to Mars orbit is investigated. Results of onboard control complex accuracy characteristics estimation are presented at the given dynamic spacecraft scheme which is taking into account the liquid oscillations in tanks and structure elements elasticity. At modelling the errors of measuring devices installation, errors of SINS initial alignment and instrumental errors of SINS sensitive elements, variation of control engines parameters were taken into account. The structure of the developed complex of imitation modelling of interplanetary spacecraft controlled motion is resulted. Estimations of active flight legs realization accuracy were received by a method of statistical modelling of spacecraft controlled motion