Analysis of nonstationary heating and cooling of a thermomagnetic engine gadolinium working element

The paper presents the results of calculating nonstatitionary heat exchange between a heattransfer agent (water) and a gadolinium working element of the thermomagnetic engine with the use of ANSYS 13.0 certified software. Recommendations for designing the thermomagnetic engine working elements are given based on the analysis of calculation results.     

Aircraft engine health management via stochastic modelling of flight data interrelations

A novel engine health management (EHM) scheme is introduced. It uses flight-level, instead of thermodynamic, data to cost-effectively augment the onboard EHM redundancy. For a nominal healthy aircraft, fault-sensitive interrelations among flight data are globally modelled inside a flight regime via Constant-Coefficient Pooled Nonlinear AutoRegressive with eXogenous (CCP-NARX) excitation representations. Single or sequential engine faults perturb these interrelations. Statistically evaluating the perturbation-induced effects draws reliable conclusions on the engine?s health. Validation and comparisons with Kalman filter-based alternatives are made throughout the regime under various operational conditions.     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

Comparative analysis of mixing chambers for two multiphase flows of oppositely charged particles

In this paper, we formulated the criteria for evaluating the effectiveness of mixing chambers, needed in obtaining polymeric materials with reproducible properties. The results of comparative analysis of organizing the methods for mixing two multiphase flows of oppositely charged particles are presented. This analysis, carried out using CFD programs, shows that the mixing chamber construction in which the flows being mixed are directed at an angle to each other, and additional gas flow inlets are provided in the lateral wall, is the most efficient.     

Effect of bacterial population density on germination wheat seeds and dynamics of simple artificial ecosystems.

Effect of the size of rhizospheric bacterial populations on germination of seeds and development of simple terrestrial "wheat plants--rhizospheric microorganisms--artificial soil" and "wheat plants-artificial soil" systems has been studied. Experiments demonstrated that within specify ranges in the inoculate, the rhizospheric bacteria are capable of increasing the yield of germinated seeds and stimulate the growth of plantlets. Germination of seeds inoculated with bacteria was either stimulated, or inhibited or remained at control levels depending on the amount of bacteria. Plant biomass growth and total photoassimilation has been found to depend on the amount of bacteria on the plant roots: the higher the amount of bacteria on plant roots, the smaller is the biomass of plants but the total photoassimilation is, higher. Thus, depending on the amount of bacteria on the roots of plants the system either increases the biomass of plants or increases the total photoassimilation, i.e. "pumps" carbon through itself involving bacteria. Grant numbers: N99-04-96017, N15.     

Application of Recursive Estimation and Kalman Filtering to Doppler Tracking

The techniques of recursive estimation and Kalman filtering are applied to the problem of estimation of space vehicle orbits and trajectories using only measurements of the Doppler shifts in radio signals transmitted by or reflected from the target. Two approaches are described. One is a global fit technique in which the parameters of an assumed trajectory model are estimated. The second is a pointwise mapping technique in which the trajectory estimate is extrapolated as the target tracking data is received. The paper provides a tutorial illustration of the direct application of recursive optimization techniques to a class of engineering problems.     

Experiments with injection of powerful plasma jet into the ionosphere

This paper describes two rocket experiments “Aelita” with high power lithium plasma injection. The results of onboard magnetometer, massspectrometer, photometer, plasma, corpuscular and ground radar measurements are given. Dynamics and structure of plasma formation are discussed.     

LS Localizer Multipath Analysis

The scattering effect of structures on Instrument Landing System localizer signals is analyzed in this paper. A generalized computer program results which can be used to determine the reflection from surfaces of most materials and orientations for which the radius of curvature is large compared with the wavelength. For most reflecting walls, a closed form solution is used and the computation time is short. The program will enable users to determine the placement of hangars, towers, etc., in airports and to find ways to reduce their effect on localizer facilities.     

Determination of Bounds on Performance Measure and Min-Max Controllers in Time-Lag Systems

The effect of bounded deterministic disturbances (external and/or internal) on a chosen performance index (PI) is investigated. Upper and lower bounds of the PI about a nominal value are determined by the application of the optimum control theory. A computational procedure is also proposed to determine an approximately optimal feedback controller for time-lag systems. Such a controller is designed here on the basis of min-max criteria. Numerical examples illustrate the proposed approach.     

Landsat satellite imagery of the Qattara Depression area,Egypt

The Qattara Depression lies in the northern part of the Western Desert of Egypt at a distance of some tens of kilometers to the south of the Mediterranean Sea Coast. The depression in question is the largest one in the great Sahara extending across North Africa. It covers an area of some 19,000 km² at ? 60 m level and the absolute level of its lowest point is about ? 134 m. The depression extends for about 300 km in a roughly ENE-WSW direction, while its width is variable reaching to a maximum of about 145 km. Feasibility studies are currently carried out for the Qattara solar-hydro-electric project which aims at generating hydro-electric power by the drop of the Mediterranean Sea water into the depression after passing through a canal/tunnel system. Peak load electric power may be also generated by raising the water to the small hollow of Deir Kirayim, situated at a higher level near the depression, and allowing it to drop to a low level.For the purpose of assessing the regional criteria involved in the implementation of the project and the environmental impact of such implementation, the Qattara Depression and the surrounding area has been studied on a regional scale by the utilization of LANDSAT satellite imagery. The maps produced by the interpretation of the images in question include those of the geological and environmental units, structural lineations, drainage and vegetation cover. Lineation density and drainage density maps are derived by the computation of the structural lineation and drainage maps respectively. A map of groundwater conditions is worked out on the basis of the image interpretation, and the observations previously carried out on the groundwater aquifers in the Qattara Depression and the surrounding area. LANDSAT satellite image interpretation and computation are supported by intensive observations carried out in the field as well as chemical, petrological and mineralogical analyses of the samples collected.The LANDSAT satellite images proved to be of great importance in mapping the Qattara Depression floor which is hardly accessible to classical mapping, and especially in view of the large area which could be covered by imagery mapping in a reasonably short time compatible with the duration of the feasibility study. The special characters of the spaceborne multispectral imagery have been paramount in deciphering the major regional features of the investigated area.The overall synoptic picture of the regional setting of the geological and environmental units, faults, fractures and folds, drainage lines and plant cover in the large area studied has been clarified for the first time. It has been demonstrated that the Qattara Depression is actually constituted of several small depressions. The environmental impact of the project implementation has been visualized especially regarding the possible influence of the saline water on the fresh groundwater sources. The thick salt accumulation in the depression has been found to be of such extension as to increase the salinity of the Mediterranean Sea water stored in the depression following the implementation of the project. The lineation density map has been particularly of great help in the localization of sites subjected to intense crustal deformation, greater slope instability and run off surface water flooding.