Modes of Sliding,switching and linear vector control with a given quality of transient processes under uncertainty

The results obtained for the systems with a linear stationary object and scalar control of sliding and switching modes [1] are further developed. The methods of forming five modes of system operation with discontinuous and linear vector control at nominal and uncertain limited disturbances are suggested. The necessary quality of transient processes with regard to the speed of response and zero stationary error at all five modes and also controlled oscillation frequency and amplitude of control signals at the sliding modes are provided. The effective sequence of switching the modes mentioned during the finite and unlimited time intervals is proposed. The results are useful for qualitative tracking of programmed motion for flight vehicles, robot manipulators, and other technical and production systems.     

Active debris removal of multiple priority targets

Today’s space debris environment shows major concentrations of objects within distinct orbital regions for nearly all size regimes. The most critical region is found at orbital altitudes near 800 km with high declinations. Within this region many satellites are operated in so called sun-synchronous orbits (SSO). Among those, there are Earth observation, communication and weather satellites. Due to the orbital geometry in SSO, head-on encounters with relative velocities of about 15 km/s are most probable and would thus result in highly energetic collisions, which are often referred to as catastrophic collisions, leading to the complete fragmentation of the participating objects. So called feedback collisions can then be triggered by the newly generated fragments, thus leading to a further population increase in the affected orbital region. This effect is known as the Kessler syndrome.     

Buckling of composite panels: A criterion for optimum stiffener design

In this paper a linear, closed-form analysis of the buckling behavior of an orthotropic plate with elastic clamping and edge reinforcement under uniform compressive load is presented. This is a typical structural situation found in aerospace engineering for instance as stiffeners in wings or the fuselage. All governing equations are transformed in a dimensionless system using common characteristic quantities to gain good analytical access. The buckling behavior is analyzed and generic buckling diagrams are presented. The solutions show excellent agreement with results from literature and numerical analyses.The minimum bending stiffness of the edge reinforcement needed to withstand buckling is examined and a minimum stiffness criterion is presented. Furthermore an absolute minimum bending stiffness is found which is sufficient to enable the reinforcement to act as a near-rigid support for arbitrarily long plates. These criteria are of interest for optimized lightweight design of stringers and stiffeners.     

Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

Mathematical modeling of plasma drifts over equatorial low latitude regions

This paper presents a mathematical model to simulate ionospheric plasma drifts at equatorial low latitude regions by coupling of E- and F-regions. The governing non-linear differential equations (of elliptic and parabolic nature) are solved numerically through finite-difference schemes and obtained neutral winds and electric fields. The temperature and electron density profiles are generated utilizing MSIS-86 atmospheric model. The continuity equation is employed to obtain night-time E-region density profile using measured ionograms at Trivandrum (India). The computed vertical and zonal plasma drifts are comparable with measured Jacamarca plasma drifts with little variations during noon and evening times. The plasma drifts at Trivandrum (8.5° N, 76.5° E, dip 0.5° N) are compared with those of Jicamarca (12° S, 76.9° W, dip 2° N). Neutral wind simulations of present model agree well with those of horizontal wind model (HWM-93). The post-sunset enhancement and its reversal are also discussed.     

Calculation of flight vehicle main support wheel vibrations taking into account brake forces

A model of the main support of the aircraft landing gear is presented and its dynamics is studied using the equations for the distributed motion of a wheel equipped with a brake. Stability of the support wheel rolling motion is analyzed and the brake parameter values which may cause stability loss are found. The results of numerical experiments are presented.     

Analysis of an arbitrarily loaded shell of revolution based on the finite element method in a mixed formulation

The volume finite element in the form of hexahedron with nodal unknowns as components of the displacement vector and stress tensor has been developed to analyze the shells of revolution. The displacement vector components for the inner point of the finite element and the components of its stress tensor are expressed through the nodal unknowns using the method of vector and tensor fields interpolation by the trilinear shape functions; that provides taking into account the finite element displacement as a whole solid. The variational principle in a mixed formulation is applied to form the matrix of hexahedron deformation. The efficiency of the proposed method for approximating the values being sought as vector and tensor fields in comparison with the traditional method for approximating the values being sought as scalar fields is confirmed by a numerical example.     

Calculation of low cycle fatigue life for gas-turbine engine critical parts

The paper presents a technique of calculating the life for gas turbine engine parts in a low cycle area based on the influence coefficients taking into account analytical and operational factors. A statistical method is used to determine the influence coefficients.     

Low-energy ion fluxes and magnetic field on the inner boundary of the heliosphere

A comparison of temporal profiles of low-energy ion intensity and magnetic field magnitude in different periods of solar activity in the outer heliosphere is carried out using the data of the Voyager 1 and Voyager 2 spacecraft. It is shown that temporal, spectral, and statistical characteristics of particle fluxes and magnetic field in the heliospheric regions before and after the terminal shock in 2002–2008 had similar dynamics in different hemispheres. This similarity allowed one to assume that, in the region of the inner heliospheric boundary, a quasistable spatial structure existed moving together with the terminal shock in accordance with the solar wind pressure, as well as, probably, under the action of the interstellar medium. It was revealed that the spatial dimensions of most details of this structure are less on Voyager 2, which, probably, is due to variation of the solar activity level, difference in latitude of spacecraft disposition, and also the influence of the interstellar magnetic field.     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.