用最小二乘法评定圆柱度误差的理论与算法

建立了用最小二乘法评定圆柱度误差的理论与算法,并对圆柱度误差进行了定量分析和定性分析,给出了误差分离的定量计算公式,将其分离成形状误差、参数误差和方向误差,并指出了每种误差的补偿原则。所推导的数学模型简单、明了,具有推广价值。     

基于红外图像的返回舱被动测距

针对飞船返回段光学设备不能测距的问题,提出一种基于红外序列图像处理的返回舱被动测距方法。该方法选择主伞作为测量对象,利用最小外接矩形算法实现主伞轮廓图像测量,然后基于小孔成像理论,建立返回舱被动测距模型。为了减小图像噪声及边缘模糊对测量精度的影响,使用了前站引导数据修正以及距离值分段拟合等手段。实验结果表明,在没有连续云层遮蔽情况下,该方法对返回舱距离测量是可靠的和有效的。     

调节阀特性研究

针对某种调节阀,利用AMESim软件建立了该调节阀的仿真模型,仿真计算了该调节阀液流试验的流量特性,结果与调节阀液流试验结果基本一致,证明了仿真模型的合理性。利用该模型准确地预测了全系统试验过程中调节阀的流量特性,并对该调节阀的起动特性进行了初步研究。     

Soil moisture mapping over the Chinese Loess Plateau using ENVISAT/ASAR data

In this paper, we used the available algorithm for soil moisture estimation over LOPEX05 (the Loess Plateau land surface process Experiment (2005)) area. The available algorithm used ENVISAT/ASAR AP mode VV polarization observational data at a low incidence angle and ground measured soil moistures. The ground measurements were performed in the summer of the 2005 during the LOPEX05 field campaign. The validated results indicate that an average difference between the soil moistures estimated from the microwave remote sensing and ground measurements is less than 0.02 cm³/cm³, with a RMS error of 2.0%, and a maximum less than 0.04 cm³/cm³. The algorithm was applied to the surface soil moisture mapping later. The results show that this algorithm is suitable for monitoring soil moisture information of the agricultural fields over the Chinese Loess Plateau, when ground land cover situation and the resolution of imagery data are taken into account. However, we also find that there are large differences over the steep slope region, the edge of mesa. The results are not acceptable for surface soil moisture estimation in these regions. Thus, the surface soil moisture retrieval in the steep slope region of the Loess Plateau need to be further investigated in the future.     

Passive sonar fusion for submarine C2 systems

The most important sensors for gathering target information onboard a submarine are passive sonars. Problems concerning fusion of these passive sonars are discussed. Three typical passive sonars-passive noise sonar, passive ranging sonar and acoustic pulse surveillance sonar-constitute a passive sonar system for data fusion. This paper is concerned mainly with problems of significance in system development, such as tactical application background, special fusion techniques and own-ship maneuver considerations     

Robust control for an unmanned helicopter with constrained flapping dynamics

In this paper, a neural network based adaptive prescribed performance control scheme is proposed for the altitude and attitude tracking system of the unmanned helicopter in the presence of state and output constraints. For handling the state constraints, the barrier Lyapunov function and the saturation function are employed. And, the prescribed performance method is used to deal with the flapping angle constraints for the unmanned helicopter. It is proved that the proposed control approach can ensure that all the signals of the resulting closed-loop system are bounded, and the tracking errors are within the prescribed performance bounds for all time. The numerical simulation is given to illustrate the performance of the proposed scheme.     

Multiple-model estimation with variable structure. III. Model-groupswitching algorithm

A general multiple-model (MM) estimator with a variable structure (VSMM), railed model-group switching (MGS) algorithm, is presented. It assumes that the total set of models can be covered by a number of model groups, each representing a cluster of closely related system behavior patterns or structures, and a particular group is running at any given time determined by a hard decision. This algorithm is the first VSMM estimator that is generally applicable to a large class of problems with hybrid (continuous and discrete) uncertainties. It is also easily implementable. It is illustrated, via a simple fault detection and identification example, that the MGS algorithm provides a substantial reduction in computation while having identical performance with the fixed-structure Interacting Multiple-Model (FSIMM) estimator     

高效液力偶合器轮系参数分析研究

高效液力偶合器额定工况无滑差的特点，使大功率（＞ ３００ ｋ Ｗ ）液力偶合器发热问题得到根本解决。就其设计方法进行分析，提出了斗轮及斗叶数的确定方法，并通过样机试验了解该偶合器的特性。     

PCM系统中数字相敏检波器的设计与仿真

在PCM（埋地管道电流测绘）系统中，实际的信号采集需要解决在非常恶劣的环境中对ELF（甚低频）信号的精确测量的问题。传统的方法一般都采用APSD（模拟相敏检波器）来实现，然而在实际的电路中用模拟相敏检波器效果并不是很理想，结果存在严重的误差。针对目前模拟相敏检波器存在的问题，设计一种DPSD（数字相敏检波器）实现消除PCM系统中ELF信号中工频干扰的目的。该检波器能有效的克服模拟相敏检波器的缺点，更精确的进行微弱信号的检测，最后使用MATLAB仿真软件对模拟和数字相敏检波器进行了仿真比较。     

DISTRIBUTION MODEL OF FATIGUE LIFEAND ITS GOODNESS-OF-FIT TEST

ＤＩＳＴＲＩＢＵＴＩＯＮＭＯＤＥＬＯＦＦＡＴＩＧＵＥＬＩＦＥＡＮＤＩＴＳＧＯＯＤＮＥＳＳ－ＯＦ－ＦＩＴＴＥＳＴＤｏｎｇＣｏｎｇ；ＲｏｎｇＨａｉｗｕ；ＸｉａＲｅｎｗｅｉ（ＤｅｐａｒｔｍｅｎｔｏｆＡｉｒｃｒａｆｔＥｎｇｉｎｅｅｒｉｎｇ，ＢｅｉｊｉｎｇＵｎ...