Stable mid-latitude red arcs: Observations and theory

Summary The observational features of the arc are fairly well established. At present, the thermal conduction model appears to explain the red arc features most consistently, but it must be noted that a soft electron flux would give very similar results. Ion temperature measurements in the vicinity of an arc, which should be forthcoming in the very near future, can establish conclusively whether transverse electric fields play any important role in the formation of the arcs. Accepting the assumption that the arcs are the result of energy flowing down from the plasmasphere, the major remaining question is: where does the energy come from and how does it get into the plasmasphere? The various proposed mechanisms discussed in the previous chapter appear feasible, but much work needs to be done before this problem is completely resolved.On leave from the Department of Electrical Engineering, The University of Michigan, Ann Arbor.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Evaluation of Multipoint Interaction in the Design of a Thin Diffraction-Limited Active Mirror

Active control of a thin, deformable mirror is one approach to obtaining diffraction-limited performance from large orbiting telescopes. The control system design requires knowledge of the mirror reaction to the multiple forces used to maintain the desired mirror figure. A structural analysis program is used to obtain estimates of the static deflections of a point-loaded, thin, shallow, spherical primary mirror. The calculated deflections are compared to experimentally measured deflections for a specific configuration.     

Recurrent isolation of hydrogen peroxide-resistant spores of Bacillus pumilus from a spacecraft assembly facility

While the microbial diversity of a spacecraft assembly facility at the Jet Propulsion Laboratory (Pasadena, CA) was being monitored, H2O2-resistant bacterial strains were repeatedly isolated from various surface locations. H2O2 is a possible sterilant for spacecraft hardware because it is a low-temperature process and compatible with various modern-day spacecraft materials, electronics, and components. Both conventional biochemical testing and molecular analyses identified these strains as Bacillus pumilus. This Bacillus species was found in both unclassified (entrance floors, anteroom, and air-lock) and classified (floors, cabinet tops, and air) locations. Both vegetative cells and spores of several B. pumilus isolates were exposed to 5% liquid H2O2 for 60 min. Spores of each strain exhibited higher resistance than their respective vegetative cells to liquid H2O2. Results indicate that the H2O2 resistance observed in both vegetative cells and spores is strain-specific, as certain B. pumilus strains were two to three times more resistant than a standard Bacillus subtilis dosimetry strain. An example of this trend was observed when the type strain of B. pumilus, ATCC 7061, proved sensitive, whereas several environmental strains exhibited varying degrees of resistance, to H2O2. Repeated isolation of H2O2-resistant strains of B. pumilus in a clean-room is a concern because their persistence might potentially compromise life-detection missions, which have very strict cleanliness and sterility requirements for spacecraft hardware.     

COSAC onboard Rosetta: a bioastronomy experiment for the short-period comet 67P/Churyumov-Gerasimenko

The COSAC (Cometary Sampling and Composition Experiment) onboard the Rosetta mission is a combined gas chromatograph (GC)-mass spectrometer (MS). It is situated on Philae, the lander of the mission, which is intended to land on the nucleus of comet 67P/Churyumov- Gerasimenko. The purpose of the experiment is to analyze the volatile fraction of soil samples retrieved by a drill. For investigation, the samples will be pyrolysed, and the emanating gases fed into a GC, into an MS, or the combination of both. In the first part of this paper, the bioastronomical relevance of such measurements is outlined. In the second part the details of the hardware and its performance are described.     

Selection of a Charging Choke Damping Network

The availability and ease of programming for many computer aided design (CAD) languages permits their use where, formerly, bread boarding or analytical means would have been employed to solve specific circuit analysis problems. One of many available CAD languages is the electronic circuit analysis program (ECAP). The ECAP language is divided into three sections, dc-analysis. acanalysis, and transient analysis. The three modes of ECAP together with fast computer access provide a helpful tool for the design engineer. Following is a typical problem of oscillatory transients encountered in line-type modulators. The solution to the problem is a model of sufficient correlation with the observed oscillation as an aid to find a network which will critically damp the oscillation.     

High-Speed Homopolar Inductor Alternators of Minimum Leakage Reactance

The leakage reactance of the machine is expressed as an equation involving slot leakage, end-connection leakage, differential leakage, stator-halves leakage, and tooth-top leakage reactance. This leakage reactance equation, or objective function, is then minimized under suitable constraints. Geometric programming is used to carry through the optimization procedure. A computer program is developed and applied to find the optimum leakage reactance for a 95 kVA, 208 V, wye-connected, 40 800 r/min aerospace alternator, using 8-, 10-, and 12-pole machines.     

Infrared astronomy

This review paper is a survey of infrared astronomy up to early 1969. The techniques and photometric standards are mentioned briefly, and results cover solar, lunar, and planetary observations. Point sources and extended sources both within and beyond the Galaxy are included, ending with the problem of cosmic background radiation. It is concluded that great progress will be possible when large infrared telescopes are placed above the atmosphere in orbit for extended periods of time.This work was conducted under the McDonnell Douglas Corporation Independent Research and Development Program.     

Measured Gain Improvement Characteristics of a Space Diversity Antenna System

A two-element adaptively phased array withelement gains of 18 dB was assembled andevaluated at 136 MHz. The gain improvementof the system over that of a single element wasmeasured while tracking ATS-C. The measuredgain improvement fell within 0.5 dB ofthe theoretical maximum 90 percent of thetime, corresponding to a normalized improvementof 2.5 dB for the two-element array. Athorough analysis of the AGC weighting processused in the system was made with particularemphasis placed on the effects of gainand noise figure variations between arraychannels.     

The failure of marginal detonations in expanding channels

Critical conditions for detonation failure due to tube expansion have been observed in marginal detonations propagating in a in. (6.35 × 76.2 mm) channel. In these experiments, a well established marginal detonation propagating in the narrow channel entered a test section in which one of the narrow walls was inclined to the central axis at positive angles which ranged from 10° to 45°. Experiments were performed at pressures ranging from 60 to 200 torr (8 to 26.7 kPa) in stoichiometric hydrogen-oxygen mixtures diluted with 20, 50 and 70% argon. Smoke track records obtained on the surface which is the major dimension of the tube, were used to determine failure, incipient failure or self-sustenance of the entering wave.Because of the narrow tube used in the studies the incident waves were marginal in that their velocity was below the expected CJ (Chapman-Jouguet) value, their transverse wave spacing was larger than one would see in a large tube, and the transverse waves were of greater strength than in an ordinary detonation. All of these indicators of marginal behavior became progressively more pronounced as the pressure dropped from 200 torr (26.7 kPa) to the limit pressure of approximately 58 torr (7.73 kPa).The most interesting result of this experimental investigation is that the theoretical analyses predicted that simple one-dimensional opening of the tube should not show a pressure dependence to failure, while the experiments showed a definite decrease in the opening angle required for failure as initial pressure decreased. This behavior is related to the marginality of the incident waves, which is observed to increase smoothly with decreased pressure. It is postulated that detonation failure in the hydrogen-oxygen system occurs when the shock velocity at the end of the cell drops to about 0.60 of the CJ value due either to marginal behavior or to an expansion of the cross section of the tube.