Optimization of observer trajectories for bearings-only targetlocalization

The problem of bearings-only target localization is to estimate the location of a fixed target from a sequence of noisy bearing measurements. Although, in theory, this process is observable even without an observer maneuver, estimation performance (i.e., accuracy, stability and convergence rate) can be greatly enhanced by properly exploiting observer motion to increase observability. This work addresses the optimization of observer trajectories for bearings-only fixed-target localization. The approach presented herein is based on maximizing the determinant of the Fisher information matrix (FIM), subject to state constraints imposed on the observer trajectory (e.g., by the target defense system). Direct optimal control numerical schemes, including the recently introduced differential inclusion (DI) method, are used to solve the resulting optimal control problem. Computer simulations, utilizing the familiar Stansfield and maximum likelihood (ML) estimators, demonstrate the enhancement to target position estimability using the optimal observer trajectories     

Soil moisture estimation by using multipolarization SAR image

In the past studies, different soil moisture estimation models were developed for bare soil areas by using remotely-sensed data. However, there are few models that can be used to estimate soil moisture in vegetated areas. Water Cloud Model (WCM) model is a widely used soil moisture estimation model has been developed for vegetated areas. In this study, the WCM model was extended to take soil roughness parameter into consideration. The modeling and its accuracy assessment were done by using multi-polarization Airborne Synthetic Aperture Radar (AIRSAR) images and ground data collected during field Soil Moisture Experiments.     

Ulysses observations of a coronal origin particle event at 32° south heliographic latitutde

A remarkable streaming beam-like particle event of 60 keV-5 MeV ions and of 38–315 keV electrons has been reported previously. This event has been associated with the passage of a Coronal Mass Ejection (CME) over the Ulysses spacecraft on June 9–13, 1993. At this time, the spacecraft was located at 4.6 AU from the sun and at an heliolatitude of 32° south. It was proposed (Armstrong et al., 1994) that the particle injection source could have been of coronal origin. In this study, we analyse the solar activity during this period. We identify a region of solar radio noise storms in the corona and in particular, a flare on June 7 that presents all the required characteristics to produce the hot plasma beam observed in the interplanetary medium.     

Rocket Exhaust Scattering Effects on Incident Microwave Propagation Characteristics

This paper considers the effect of the rocket exhaust turbulence and scattering within the surrounding medium upon the propagation characteristics of incident electromagnetic waves. The exhaust is represented by a cylindrical plasma beam, diffusing through the surrounding medium. The equations of propagation of EM waves are derived for both TE and TM modes. By using a quasi-linear perturbation technique the exhaust is further separated into an inner homogeneous cylindrical plasma beam, and an outer conical inhomogeneous turbulent region. The isotropic change in the temperature of the outer region and its effects on the fluctuations in the density of electrons, collision frequency, and plasma index of refraction are analyzed in detail. It is found that the exhaust turbulence and scattering effects produce linear fluctuations in the E and H fields computed from the exhaust inner region effect. The equations of this paper can be used in the prediction of the radar cross sections and the attenuation of microwaves by rocket exhaust plumes.     

Computational Research of the Main Rotor Hover and Vertical Descent States Based on the Nonlinear Blade Vortex Model

The research is conducted of aerodynamic performance of the Mi-8 helicopter main rotor in the hover state and the vertical descent state, including vortex ring states (VRSs). Total and distributed aerodynamic performance, wake patterns, and main rotor flow patterns are calculated. The findings and results were compared with those provided by other researchers.     

Homologous flare–CME events and their metric type II radio burst association

Active region NOAA 11158 produced many flares during its disk passage. At least two of these flares can be considered as homologous: the C6.6 flare at 06:51 UT and C9.4 flare at 12:41 UT on February 14, 2011. Both flares occurred at the same location (eastern edge of the active region) and have a similar decay of the GOES soft X-ray light curve. The associated coronal mass ejections (CMEs) were slow (334 and 337 km/s) and of similar apparent widths (43° and 44°), but they had different radio signatures. The second event was associated with a metric type II burst while the first one was not. The COR1 coronagraphs on board the STEREO spacecraft clearly show that the second CME propagated into the preceding CME that occurred 50 min before. These observations suggest that CME–CME interaction might be a key process in exciting the type II radio emission by slow CMEs.     

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。      

The RadioAstron project: Measurements and analysis of basic parameters of space telescope in flight in 2011–2013

The results of a large number of the antenna radiometric measurements at bands of 92, 18, 6.2, 1.35, and 1.7-1.2 cm are presented by the data of the standard telemetry system of the Spektr-R spacecraft. Both special sessions of calibration object observations in the mode of a single space radio telescope (SRT) operation and numerous observations of researched sources in the mode of the ground-space interferometer were used. The obtained results agree with the first results of Kardashev et al. (2013), i.e., within 10–15% at bands of 92, 18, and 6.2 cm and 20–25% at the band of 1.35 cm. In the main, the measurements for the eight subbands at wavelengths of 1.7-1.2 cm indicate a monotonic increase in the spectral system equivalent flux density (SEFD) of noise radiation with a frequency consistent with the calculated estimates for the discussed model. The sensitivity of the ground-space interferometer for the five subbands at wavelengths from 1.35 to 1.7 cm can be higher by a factor of 1.5, and for the three subbands from 1.35 to 1.2 cm lower by a factor of 1.5 than at the band of 1.35 cm. The SRT contribution to the interferometer sensitivity proportional to the square root of SEFD is close to the design one at the bands of 92 and 18 cm and decreases the design sensitivity approximately by a factor of 1.5 and 2 at the bands of 6.2 and 1.35 cm, respectively. These differences of implemented values from the design ones were not significantly affected the scientific program implementation.     

An Automatic Timing Receiver System Based on the Loran-C Navigational Network

This paper describes some new concepts in dealing with the circuitry for Loran-C automatic timing systems. The conventional analog techniques associated with phase-adjusting networks have been replaced by an incremental digital phase-shifting device. The Loran-C period generator includes facilities for delay compensation by means of an epoch monitor producing a 1-Hz output coincident with the master station TOC (time of coincidence). The required initial time information has to be accurate within ± 20 ms. The automatic format identification and decoding equipment together form a system which takes into account the information of every Loran-C pulse. Owing to the use of digital signal treatment, the synchronization accuracy is limited only by the resolution of the incremental phase shift. The automatic cycle selection device is based on sampling techniques where the derivative of the envelope is calculated. The time of coincidence has to be precalculated and fed into the thumbwheel memory of the epoch monitor, which is automatically initiated when the synchronizing operations are concluded. For VLBI purposes and transcontinental use, the accuracy of this system will be better than 1 ?s when post corrections, supplied by the U.S. Naval Observatory, are taken into account.     

Biological effects of heavy ions from the standpoint of target theory.

The biological effect of heavy ions is best described through the action cross section, as a function of the end-point of interest and the charge and speed of the ion. In track theory this is called the "ion-kill" cross section, for it is the effect produced by a single heavy ion and its delta rays. As with nuclear emulsions the biological track structure passes from the grain count regime to the track width regime to the thindown region with an increase in LET. With biological cells, as with any detector capable of storing sublethal damage, with low LET irradiation the action cross section (in the ion-kill mode) is increasingly obscured by the effect of "gamma-kill", by the influence of overlapping delta rays from neighboring heavy ions. Thus at low LET response is dominated by the gamma-kill mode, so that the RBE approaches 1. The theory requires 4 radiosensitivity parameters for biological detectors, extracted from survival curves at several high LET bombardments passing through the grain count regime, and at high doses. Once these are known the systematic response of biological detectors to all high LET bombardments can be unfolded separating ion kill from gamma kill, predicting the response to a mixed radiation environment, and predicting low dose response even at the level of a single heavy ion. Cell killing parameters are now available for a variety of cell lines. Newly added is a set of parameters for cell transformation.