The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

MEMS inertial rate and acceleration sensor

Development of the μSCIRAS^TM (pronounced micro-Cyrus) multisensor for a period of over six years has produced a practical MEMS Inertial Measurement Unit (IMU). Using only three silicon sensors, a full-up IMU suitable for tactical grade navigation and guidance applications has been achieved. Iterative improvements in silicon sensor design and bulk micromachining processes have matured to the point where an IMU with an attractive price/performance ratio is now producible. This paper summarizes the design features and test results for an IMU with <100 deg/hr performance. Test results are shown for rate bias and acceleration bias over temperature. Production of this initial member of the μSCIRAS product family begins this year to support applications including guided artillery shells, technology insertion to decrease missile costs, navigation of remotely-piloted vehicles, dismounted soldier location devices and other navigation aids. The small size of this silicon multisensor and its ability to measure both angular rotation rate and linear acceleration provides a useful advantage in product packaging, cost, size, and system testing. The μSCIRAS Inertial Sensor Assembly (ISA) is housed in a 2 cubic inch package weighing less than 5 ounces (140 grams) requires less than 0.8 Watts of power. Continuing development will lead to greatly improved performance on the order of 1 deg/hr at low prices in high-volume production     

An experimental study of flame turbulence

An experimental study of the turbulence generated by an enclosed, premixed, propane-air flame has been carried out in a combustion chamber of 25 × 20 cm cross section. Care was taken to reduce any effects of the axial pressure gradient. By suitable changes in the grid geometry, the turbulence intensity and scale of the approach flow were varied independently. The results of these experiments show that a strong link exists between the mechanisms of turbulent flame propagation and flame-generated turbulence. Thus three distinct regions may be identified, each having different characteristics in regard to the effects of turbulence scale on flame-generated turbulence. For each region, a physical mechanism for flame-generated turbulence is proposed. In particular, it is observed that over a wide range of intensity and scale of the approach turbulence, (a) the relative turbulence intensity in the flame zone varies in the range 1–2 times the relative turbulence intensity of the cold flow, (b) in the region of intermediate turbulence levels ( ) the flame-generated turbulence intensity reaches a minimum value which is equal to the approach stream turbulence intensity, (c) the flame-generated turbulence intensity reaches a maximum value when the rate of production of turbulent vorticity is equal to about half its rate of viscous dissipation.     

Principal components, covariance matrix tapers, and the subspaceleakage problem

A new class of robust space-time adaptive beamforming techniques is introduced to address a broad range of subspace leakage phenomena that arise in many sensor array applications. When present, these leakage phenomena can significantly increase the effective rank of the dominant colored noise interference spectrum, thereby reducing the appeal of techniques that exploit low-rank dominant interference (such as principal components (PC) or diagonal loading) to reduce sample support (training) requirements. By combining the covariance matrix taper (CMT) approach with either PC or diagonal loading, the minimal sample support properties of these techniques can be preserved     

疲劳S-N曲线预测的三维断裂力学方法

根据旋转弯典圆棒疲劳断口分析,给出了裂纹几何参量及应用强度因子随裂纹扩展的变化规律,采用考虑三维应力约束效应的断裂力学理论及常幅载荷下材料的疲劳裂纹扩展da/dN-ΔK曲线,得到了独立于试件几何形状和应力比的材料da/dN-ΔKeff基准数据,结合断口分析所得的应力强度因子以及材料da/dN-Δkeff数据,以三种旋转弯曲圆棒S－N（应力－疲劳寿命）曲线进行了预测,结果表明,本文预测的疲劳S－N曲线和试验的结果较为吻合,本文的S－N曲线断裂力学预测方法对确定结构全寿命具有实际指导意义,同时也揭示了发展疲劳断裂统一理论的可行性。     

Fluorescence microscopy as a tool for in situ life detection

The identification of extant and, in some cases, extinct bacterial life is most convincingly and efficiently performed with modern high-resolution microscopy. Epifluorescence microscopy of microbial autofluorescence or in conjunction with fluorescent dyes is among the most useful of these techniques. We explored fluorescent labeling and imaging of bacteria in rock and soil in the context of in situ life detection for planetary exploration. The goals were two-fold: to target non-Earth-centric biosignatures with the greatest possible sensitivity and to develop labeling procedures amenable to robotic implementation with technologies that are currently space qualified. A wide panel of commercially available dyes that target specific biosignature molecules was screened, and those with desirable properties (i.e., minimal binding to minerals, strong autofluorescence contrast, no need for wash steps) were identified. We also explored the potential of semiconductor quantum dots (QDs) as bacterial and space probes. A specific instrument for space implementation is suggested and discussed.     

电火花成型机数控系统的研究

通过研究开放式数控系统的体系结构，结合开放式的运动控制器，开发了基于PC的四轴联动电火花数控系统，本研究通过采用神经模糊控制智能技术，并结合数据库，依据放电间隙状况对电火花成型加工过程进行实时控制，保证加工过程处于优化状态，文中还详细研究了高精度双闭环控制以实现工件的高精度加工。     

Viewing radiation signatures of solar energetic particles in interplanetary space

A current serious limitation on the studies of solar energetic particle (SEP) events is that their properties in the inner heliosphere are studied only through in situ spacecraft observations. Our understanding of spatial distributions and temporal variations of SEP events has come through statistical studies of many such events over several solar cycles. In contrast, flare SEPs in the solar corona can be imaged through their radiative and collisional interactions with solar fields and particles. We suggest that the heliospheric SEPs may also interact with heliospheric particles and fields to produce signatures which can be remotely observed and imaged. A challenge with any such candidate signature is to separate it from that of flare SEPs. The optimum case for imaging high-energy (E > 100 MeV) heliospheric protons may be the emission of π⁰-decay γ-rays following proton collisions with solar wind (SW) ions. In the case of E > 1 MeV electrons, gyrosynchrotron radio emission may be the most readily detectible remote signal. In both cases we may already have observed one or two such events. Another radiative signature from nonthermal particles may be resonant transition radiation, which has likely already been observed from solar flare electrons. We discuss energetic neutrons as another possible remote signature, but we rule out γ-ray line and 0.511 MeV positron annihilation emission as observable signatures of heliospheric energetic ions. We are already acquiring global signatures of large inner-heliospheric SW density features and of heliosheath interactions between the SW and interstellar neutral ions. By finding an appropriate observable signature of remote heliospheric SEPs, we could supplement the in situ observations with global maps of energetic SEP events to provide a comprehensive view of SEP events.     

金属零件的一种快速成型制造方法

金属零件的快速制造是快速成型技术的最终目标之一,也是当今快速成型领域的一大研究热点。本文在介绍快速成型技术的一个重要分支－选区激光烧结的基础上,提出了一种基于小功率激光快速成型系统的金属零件成型工艺。这种方法首先烧结金属与有机粘结剂的混合粉末,生成“绿件”,而后除粘、熔渗金属,最终得到致密的金属件。最后,文中给出了加工实例,并对这种工艺的影响因素进行了详细的分析与讨论。