Ulysses out-of-ecliptic observations of “27-day” variations in high energy cosmic ray intensity

We report the discovery that for latitudes above 40°S, the observed recurring modulation of cosmic rays and anomalous nuclei occurs without the detection byUlysses of the solar wind velocity and magnetic field recurring enhancements that have, heretofore at lower latitudes, defined corotating interaction regions—i.e., the mechanism producing the recurring intensity variations >40°S appears to be located beyond the radial range ofUlysses.     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

Paxsat and progress in arms control : Canadian research focuses on remote sensing applications

Verification of arms control treaties is essential to provide adequate international confidence in treaty compliance. This Viewpoint underlines the responsibility of non-superpower countries to become more closely involved in space surveillance of treaties to which they are parties. In Canada, Paxsat research has focused on two potential applications of space-based remote sensing to multi-lateral arms control verification. The necessary technology is readily available in non-superpower countries for the Paxsat concept to be put into operation.     

Market-based systems for instrument development and science planning

Market-based systems are those systems in which currency is used to express demand for a limited resource. In these systems, users `own' currency and exchange it for a desired commodity. Though used for thousands of years, market-based applications to space missions are still in their infancy. The first successful application was in 1992 with the Cassini Mission to Saturn. In this case, the sum total of mass and dollars for the science instruments had to fit within the allocated resource envelope. Results from the use of a market-based system show that the entire science payload grew from original estimates by only +1% for cost, and by –7% for mass. The next application was for Space Shuttle Secondary Payloads. In this application, available shuttle lift mass, number of lockers for secondary payloads, and available astronaut time had to be allocated between 5 NASA Users. Experiments showed that a market-based system can reduce the size of the required workforce needed to produce a manifest of the same quality as one produced `by committee.' Finally, a market-based system was experimentally applied to LightSAR science planning, a proposed joint NASA/Commercial RADAR mission. In this application, users were able to produce a conflict-free timeline of events remotely, of high science value, in about half the time required by more traditional methods.     

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。      

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

MEMS inertial rate and acceleration sensor

Development of the μSCIRAS^TM (pronounced micro-Cyrus) multisensor for a period of over six years has produced a practical MEMS Inertial Measurement Unit (IMU). Using only three silicon sensors, a full-up IMU suitable for tactical grade navigation and guidance applications has been achieved. Iterative improvements in silicon sensor design and bulk micromachining processes have matured to the point where an IMU with an attractive price/performance ratio is now producible. This paper summarizes the design features and test results for an IMU with <100 deg/hr performance. Test results are shown for rate bias and acceleration bias over temperature. Production of this initial member of the μSCIRAS product family begins this year to support applications including guided artillery shells, technology insertion to decrease missile costs, navigation of remotely-piloted vehicles, dismounted soldier location devices and other navigation aids. The small size of this silicon multisensor and its ability to measure both angular rotation rate and linear acceleration provides a useful advantage in product packaging, cost, size, and system testing. The μSCIRAS Inertial Sensor Assembly (ISA) is housed in a 2 cubic inch package weighing less than 5 ounces (140 grams) requires less than 0.8 Watts of power. Continuing development will lead to greatly improved performance on the order of 1 deg/hr at low prices in high-volume production     

An experimental study of flame turbulence

An experimental study of the turbulence generated by an enclosed, premixed, propane-air flame has been carried out in a combustion chamber of 25 × 20 cm cross section. Care was taken to reduce any effects of the axial pressure gradient. By suitable changes in the grid geometry, the turbulence intensity and scale of the approach flow were varied independently. The results of these experiments show that a strong link exists between the mechanisms of turbulent flame propagation and flame-generated turbulence. Thus three distinct regions may be identified, each having different characteristics in regard to the effects of turbulence scale on flame-generated turbulence. For each region, a physical mechanism for flame-generated turbulence is proposed. In particular, it is observed that over a wide range of intensity and scale of the approach turbulence, (a) the relative turbulence intensity in the flame zone varies in the range 1–2 times the relative turbulence intensity of the cold flow, (b) in the region of intermediate turbulence levels ( ) the flame-generated turbulence intensity reaches a minimum value which is equal to the approach stream turbulence intensity, (c) the flame-generated turbulence intensity reaches a maximum value when the rate of production of turbulent vorticity is equal to about half its rate of viscous dissipation.     

Ionization processes in the heliosphere — Rates and methods of their determination

The rates of the most important ionization processes acting in interplanetary space on interstellar H, He, C, O, Ne and Ar atoms are critically reviewed in the paper. Their long-term modulations in the period 1974 – 1994 are reexamined using updated information on relevant cross-sections as well as direct or indirect data on variations of the solar wind/solar EUV fluxes based on IMP 8 measurements and monitoring of the solar 10.7 cm radio emission. It is shown that solar cycle related variations are pronounced (factor of 3 between maximum and minimum) especially for species such as He, Ne, C for which photoionization is the dominant loss process. Species sensitive primarily to the charge-exchange (as H) show only moderate fluctuations 20% around average. It is also demonstrated that new techniques that make use of simultaneous observations of neutral He atoms on direct and indirect orbits, or simultaneous measurements of He⁺ and He⁺⁺ pickup ions and solar wind particles can be useful tools for narrowing the uncertainties of the He photoionization rate caused by insufficient knowledge of the solar EUV flux and its variations.     

Principal components, covariance matrix tapers, and the subspaceleakage problem

A new class of robust space-time adaptive beamforming techniques is introduced to address a broad range of subspace leakage phenomena that arise in many sensor array applications. When present, these leakage phenomena can significantly increase the effective rank of the dominant colored noise interference spectrum, thereby reducing the appeal of techniques that exploit low-rank dominant interference (such as principal components (PC) or diagonal loading) to reduce sample support (training) requirements. By combining the covariance matrix taper (CMT) approach with either PC or diagonal loading, the minimal sample support properties of these techniques can be preserved