五自由度磁悬磨头电控系统研究

研究的高速磨床电磁悬浮磨头电控系统尽量采用最新技术，在保证系统 性能的前提下降低了系统造价。在该系统中采用TMS320F240 DSP芯片作为控制核心，同时控制磁悬浮轴承的悬浮和变频电机调速，采用运行效率很高的汇编语言编写控制软件，其中磁悬浮轴承是PID控制算法，电机调速为SPWM方式。磁悬浮轴承PWM功率放大器中采用能简化驱动的新型半桥电路，电机调速主电路中采用智能功率模块（IPM）。动态刚度测试和高速运转实验表明，该电控系统满足高速磨床电磁悬浮磨头的控制要求。     

The Galileo Dust Detector

The Galileo Dust Detector is intended to provide direct observations of dust grains with masses between 10^-19 and 10^-9 kg in interplanetary space and in the Jovian system, to investigate their physical and dynamical properties as functions of the distances to the Sun, to Jupiter and to its satellites, to study its interaction with the Galilean satellites and the Jovian magnetosphere. Surface phenomena of the satellites (like albedo variations), which might be effects of meteoroid impacts will be compared with the dust environment. Electric charges of particulate matter in the magnetosphere and its consequences will be studied; e.g., the effects of the magnetic field on the trajectories of dust particles and fragmentation of particles due to electrostatic disruption. The investigation is performed with an instrument that measures the mass, speed, flight direction and electric charge of individual dust particles. It is a multicoincidence detector with a mass sensitivity 10⁶ times higher than that of previous in-situ experiments which measured dust in the outer solar system. The instrument weighs 4.2 kg, consumes 2.4 W, and has a normal data transmission rate of 24 bits s^-1 in nominal spacecraft tracking mode. On December 29, 1989 the instrument was switched-on. After the instrument had been configured to flight conditions cruise science data collection started immediately. In the period to May 18, 1990 at least 168 dust impacts have been recorded. For 81 of these dust grains masses and impact speeds have been determined. First flux values are given.     

The Lightning And Radio Emission Detector (LRD) instrument

The Lightning and Radio Emission Detector (LRD) instrument will be carried by the Galileo Probe into Jupiter's atmosphere. The LRD will verify the existence of lightning in the atmosphere and will determine the details of many of its basic characteristics. The instrument, operated in its magnetospheric mode at distances of about 5, 4, 3, and 2 planetary radii from Jupiter's center, will also measure the radio frequency (RF) noise spectrum in Jupiter's magnetosphere. The LRD instrument is composed of a ferritecore radio frequency antenna ( 100 Hz to 100 kHz) and two photodiodes mounted behind individual fisheye lenses. The output of the RF antenna is analyzed both separately and in coincidence with the optical signals from the photodiodes. The RF antenna provides data both in the frequency domain (with three narrow-band channels, primarily for deducing the physical properties of distant lightning) and in the time domain with a priority scheme (primarily for determining from individual RF waveforms the physical properties of closeby-lightning).     

Galileo Photopolarimeter/Radiometer experiment

The Photopolarimeter/Radiometer (PPR) is a remote sensing instrument on the Galileo Orbiter designed to measure the degree of linear polarization and the intensity of reflected sunlight in ten spectral channels between 410 and 945 nm to determine the physical properties of Jovian clouds and aerosols, and to characterize the texture and microstructure of satellite surfaces. The PPR also measures thermal radiation in five spectral bands between 15 and 100 m to sense the upper tropospheric temperature structure. Two additional channels which measure spectrally integrated solar and solar plus thermal radiation are used to determine the planetary radiation budget components. The PPR photopolarimetric measurements utilize previously flown technology for high-precision polarimetry using a calcite Wollaston prism and two silicon photodiodes to enable simultaneous detection of the two orthogonal polarization components. The PPR radiometry measurements are made with a lithium tantalate pyroelectric detector utilizing a unique arrangement of radiometric stops and a scene/space chopper blade to enable a warm instrument to sense accurately the much colder scene temperatures.     

Application of Gram-Schmidt algorithm to fully adaptive arrays

The Gram-Schmidt orthogonalization (GSO) algorithm has excellent numerical performance and is readily applicable to systolic implementations such as in a field of adaptive cancellation systems. A modified GSO algorithm for a fully adaptive array is proposed and computer simulations show that the proposed algorithm gives superior performance. A systolic implementation of the proposed GSO algorithm for fully adaptive array is presented. A feedback mode GSO algorithm for use with analog weights is also presented and has been shown to have excellent performance in the presence of weight errors     

Single-phase power distribution system power flow and faultanalysis

Alternative methods for power flow and fault analysis of single-phase distribution systems are presented. The algorithms for both power flow and fault analysis utilize a generalized approach to network modeling. The generalized admittance matrix, formed using elements of linear graph theory, is an accurate network model for all possible single-phase network configurations. Unlike the standard nodal admittance matrix formulation algorithms, the generalized approach uses generalized component models for the transmission line and transformer. The standard assumption of a common node voltage reference point is not required to construct the generalized admittance matrix. Therefore, truly accurate simulation results can be obtained for networks that cannot be modeled using traditional techniques     

Model-based segmentation of FLIR images

The use of gray-scale intensities together with the edge information present in a forward-looking infrared (FLIR) image to obtain a precise and accurate segmentation of a target is presented. A model of FLIR images based on gray-scale and edge information is incorporated in a gradient relaxation technique which explicitly maximizes a criterion function based on the inconsistency and ambiguity of classification of pixels with respect to their neighbors. Four variations of the basic technique which provide automatic selection of thresholds to segment FLIR images are considered. These methods are compared, and several examples of segmentation of ship images are given     

Comments with reply, on `A new look at nonseparable syntheticaperture radar processing' by A. Di Cenzo

The commenters point out that the idea using a two-dimensional digital correlation technique to perform synthetic-aperture-radar (SAR) processing, presented as new in the above-titled paper (see ibid., vol.24, p.218-23, May 1988), was described by them as early as 1978 and has since been described by other authors. They discuss some of these earlier studies. The author replies that he was unaware of the earlier work, and that he did not intend to convey the impression that the nonseparable transform domain processor that he presented was the first     

A SAR processor based on two-dimensional FFT codes

A synthetic aperture radar (SAR) processor approach based on two-dimensional fast Fourier transform (FFT) codes coupled with an asymptotic evaluation of the unit response function is presented. For the latter, no approximation is made to the distance function, so that the full range of geometric aberrations is analytically considered, enabling an effective reference filter to be designed. The two-dimensional FFTs were designed as to run on computers of very limited memory: the required FFT is computed by means of FFTs of lower order. Two FFT codes were considered: one is faster and allows full or reduced (quick look or multilook) resolution performance to be obtained easily; the second is slower but allows the use of a space-varying filter and/or investigations on limited portions (zoom) of the image. Both codes are suited to parallel processing, e.g. by a transputer net. A full discussion on computer memory and time requirements is presented as well as first examples of image processing results     

On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment