Aeroshell design techniques for aerocapture entry vehicles

A major goal of NASA's In-Space Propulsion Program is to shorten trip times for scientific planetary missions. To meet this challenge arrival speeds will increase, requiring significant braking for orbit insertion, and thus increased deceleration propellant mass that may exceed launch lift capabilities. A technology called aerocapture has been developed to expand the mission potential of exploratory probes destined for planets with suitable atmospheres. Aerocapture inserts a probe into planetary orbit via a single pass through the atmosphere using the probe's aeroshell drag to reduce velocity. The benefit of an aerocapture maneuver is a large reduction in propellant mass that may result in smaller, less costly missions and reduced mission cruise times. The methodology used to design rigid aerocapture aeroshells will be presented with an emphasis on a new systems tool under development. Current methods for fast, efficient evaluations of structural systems for exploratory vehicles to planets and moons within our solar system have been under development within NASA having limited success. Many systems tools that have been attempted applied structural mass estimation techniques based on historical data and curve fitting techniques that are difficult and cumbersome to apply to new vehicle concepts and missions. The resulting vehicle aeroshell mass may be incorrectly estimated or have high margins included to account for uncertainty. This new tool will reduce the guesswork previously found in conceptual aeroshell mass estimations.     

Advantages and disadvantages of prizes in a portfolio of financial incentives for space activities

The National Aeronautics and Space Administration (NASA) has proposed to use financial prizes to encourage innovation in space technology. Public debate about the use of prizes questions their effectiveness, the role of government compared with the private sector in administering prizes—for example, the Ansari X-Prize for human suborbital flight was privately funded and administered—and other issues that are likely to influence the success of this approach.     

n-Body problem: Selective effects of triple close approaches

In Celestial Mechanics the triple close approach is a highly unstable phenomenon that leads very often to the formation of a very small binary escaping with a large velocity in the direction opposite to the escape of the third body.That third escaping body is generally either the smallest mass or the second smallest and it implies a very selective effect in star clusters: the lightest stars are statistically the first to be ejected.     

Benefits to world agriculture through remote sensing

Remote sensing of agricultural land permits crop classification and mensuration which can lead to improved forecasts of production. This technique is particularly important for nations which do not already have an accurate agricultural reporting system. Better forecasts have important economic effects. International grain traders can make better decisions about when to store, buy and sell. Farmers can make better planting decisions by taking advantage of production estimates for areas out of phase with their own agricultural calendar. World economic benefits will accrue to both buyers and sellers because of increased food supply and price stabilization.

This paper reviews the econometric models used to establish this scenario and estimates the dollar value of benefits for world wheat as 200 million dollars annually for the United States and 300–400 million dollars anually for the rest of the world.     

Flow of a water jet into vacuum

At certain intervals excess water has to be dumped into space overboard of the Spacelab cabin. For the development of a useful nozzle the behaviour of a water jet flowing into vacuum was investigated experimentally and theoretical interpretations of the flow phenomena which were found are given. The influence of parameters like the shape of the nozzle, the temperature and the gas content of water were studied. At certain test conditions, the jet leaves the nozzle exit in bundled form and ends abruptly bursting into droplets and ice-particles. The “bursting”-mechanism is explained by a sudden boiling of the water in the jet causing the growth of vapor bubbles decomposing the jet. The formation of vapor bubbles is initiated by a superheating of the water of the jet caused by a sudden pressure drop and a cooling at the surface of the jet. The expansion of vapor bubbles in the jet is retarded by surface tension forces which results in a relaxation time for the bursting of the jet. The vapor flow in radial directions of the jet is approximately described by a plane radial source flow. The measurement of the pitot-pressure radially to the jet proves that the vapor flow is supersonic.     

Interaction onde de choc-couche limite laminaire sur un corps de revolution en rotation

(Shock Wave-Laminar Boundary Layer Interaction on a Spinning Axisymmetric Body)—A method is developed to predict the shock wave-laminar boundary layer interaction on an axisymmetric body spinning in axial flow. The integral scheme of Lees, Reeves and Klineberg is used. The Falkner Skan “type” equations is then established for the boundary layer on spinning cylinder and used to construct the polynomial representation of the integral quantities. The independence of the polynomials with respect to the spinning rate is demonstrated. A cylinder of 200 mm diameter with a flare is built and tested up to 5000 rmp in wind tunnel at M = 2.21. The pressure measurements are in good agreement with the theoretical results. The rotation induces the decreasing of the pressure level and boundary layer separation inside the interaction region.     

Skylab experiment M-092: results of the first manned mission

Blood pressure at 30-sec intervals, heart rate, and percentage increase in leg volume continuously were recorded during a 25-min protocol in the M092 Inflight Lower Body Negative Pressure (LBNP) experiment carried out in the first manned Skylab mission. These data were collected during six tests on each crewman over a 5-month preflight period. The protocol consisted of a 5-min resting control period, 1 min at -8, 1 min at -16, 3 min at -30, 5 min at -40, and 5 min at -50 mm Hg LBNP. A 5-min recovery period followed. Inflight tests were performed at approximately 3-day intervals through the 28-day mission. Individual variations in cardiovascular responses to LBNP during the preflight period continued to be demonstrated in the inflight tests. Measurements of the calf indicated that a large volume of fluid was shifted out of the legs early in the flight and that a slower decrease in leg volume, presumably due to loss of muscle tissue, continued throughout the flight. Resting heart rates tended to be low early in the flight and to increase slightly as the flight progressed. Resting blood pressure varied but usually was characterized by slightly elevated systolic blood pressure, lower diastolic pressure, and higher pulse pressures than during preflight examinations. During LBNP inflight a much greater increase in leg volume occurred than in preflight tests. Large increases occurred even at the smallest levels of negative pressure, suggesting that the veins of the legs were relatively empty at the beginning of the LBNP. The greater volume of blood pooled in the legs was associated with greater increases of heart rate and diastolic pressure and larger falls of systolic and pulse pressure than seen in preflight tests. The LBNP protocol represented a greater stress inflight, and on three occasions it was necessary to stop the test early because of impending syncopal reactions. LBNP responses inflight appeared to predict the degree of postflight orthostatic intolerance. Postflight responses to LBNP during the first 48 hours were characterized by marked elevations of heart rate and instability of blood pressure. In addition, systolic and diastolic pressures were typically elevated considerably both at rest and also during stress. The time required for cardiovascular responses to return to preflight levels was much slower than in the case of Apollo crewmen.     

Soviet proposals on the militarization of space

The USSR has submitted several proposals to the United Nations in recent years which are aimed at avoiding the militarization of outer space. This article examines three of the proposals and evaluates them in the context of existing treaties, to see whether or not they could resolve the political and legal problems which might arise. The reactions of the United Nations General Assembly and individual nations are also considered. The author concludes that several questions regarding the military aspects of space activity are left unresolved by the Soviet proposals.     

二硝酰胺铵(ADN)球形化工艺研究

介绍了近年来国外关于二硝酰胺铵（ADN）球形化的工艺方法，重点讨论了中间介质、分散剂、表面活性剂和热稳定剂的作用及其选择方法。     

Vibration and pulsation processes in feed systems of liquid rocket engines

Pulsation and vibration process in high speed centrifugal pumps and feed lines were investigated. Linear and quadratic relations between pulsation parameters and main factors were obtained. The investigation of turbopump low frequency oscillations showed that the intensity of pulsations is proportional to the pump specific linear size. Linear mathematic models with lumped parameters fairly well demonstrate the vibration influence on low frequency flow pressure vibrations in pumps and feed lines. It is shown that, in some conditions, the pressure oscillation amplitude distribution by the vibrating feed lines length may be characterized by the presence of a node in an intermediate section. A one-dimensional mathematic model based on wave equations proved to be suitable for calculations of vibration and pulsation parameters within a wide frequency range.