Highly accurate, noncoherent technique for spacecraft Dopplertracking

A two-way, noncoherent spacecraft navigation technique has been developed to provide velocity accuracy comparable to that available from a deep space coherent transponder (0.1 mm/s). The technique is compatible with the normal tracking procedures of the Deep Space Network (DSN) ground stations and does not require the use of a highly stable oscillator on-board the spacecraft. The measurement technique, potential error sources, and test results obtained with prototype hardware are described     

Microprocessor-Controlled Digital Shunt Regulator

A new approach to the design of power systems is presented in which a microprocessor is used as a controller for a digital shunt regulator (DSR). This approach meets the demands of future space and ground missions, i. e., high efficiency, high reliability, low weight, low volume, increased flexibility, and less development time. This approach responds to future demands by permitting realtime modification of system parameters for system optimization. This feature is especially important in the event of an anomaly. As the microprocessor need not be dedicated to the DSR, it can simultaneously be used for battery management and for charge regulator/discharge regulator control. This approach also reduces the component count, simplifies assembly and testing of the unit, results in significant time saving, and increases the reliability.     

The Electron Beam Instrument (F6) on Freja

The Electron Beam Instrument (F6) onFreja is the first attempt to apply the electron drift technique in a region of large ambient magnetic fields. The paper describes the operational principles, the technical realization, and the difficulties encountered in the derivation of the electric fields.     

Eruptive prominences as sources of magnetic clouds in the solar wind

Large amounts of coronal material are propelled outward into interplanetary space by Coronal Mass Ejections (CMEs). Thus one might expect to find evidence for expanding flux ropes in the solar wind as well. To prove this assumption magnetic clouds were analyzed and correlated with H-observations of disappearing filaments. When clouds were found to be directly associated with a disappearing filament, the magnetic structure of the cloud was compared with that of the associated filament. Additionally the expansion of magnetic clouds was examined over a wide range of the heliosphere and compared with the expansion observed for erupting prominences.     

The Freja ultraviolet imager

Auroral images acquired by satellite instrumentation have proven to be a crucial component of the scientific equiry into the physical processes of the Earth's magnetosphere. TheFreja mission provided an opportunity to extend these measurements into the temporal and spatial regime commonly associated with ground-based optical imagers. Employing the basic procedure used successfully in theViking program allowed image repetition rates of 6 s to be achieved with simultaneous exposure of all pixels within the field-of-view. Typical exposure times of 0.3 s required development of an improved image intensifier system and operational requirements resulted in image formats covering approximately one-third of a spin. Simultaneously exposing two broad-band UV cameras, the instrument generates in its normal operational mode 264.6 kbytes per image pair. Results from initial operations confirm the design approach and suggest such imagers can be routinely included on challenging low cost missions such asFreja.     

Steady-state analysis and design of a switched-capacitor DC-DCconverter

A representative switched-capacitor DC-DC converter topology is presented, circuit operation is explained, and control strategies are identified. State-space averaging is used to analyze steady-state performance and to develop control criteria and design equations. The analytical results are verified by SPICE simulation     

Steady-state analysis of the constant-frequency clamped seriesresonant converter

A constant-frequency diode-clamped series resonant converter (CFCSRC) is proposed as a solution to problems associated with frequency-controlled resonant converters. This converter has two resonant frequencies, and control is achieved by varying the relative time spent at each switching frequency. Two zero-current-switching (ZCS) modes are examined and plotted in the output plane. An equation is given for the boundary between the two ZCS modes, as well as an expression for the boundary between ZCS and non-ZCS operation; both are plotted in the output plane. The output equation for the main mode is shown to be hyperbolic. Converter peak voltages limited to the input voltages, and peak currents are less than those of the frequency-controlled clamped series resonant converter over a large operating range. Data from a prototype converter are compared with theoretical data and are shown to be in good agreement with the theoretical model     

A recursive multiple model approach to noise identification

Correct knowledge of noise statistics is essential for an estimator or controller to have reliable performance. In practice, however, the noise statistics are unknown or not known perfectly and thus need to be identified. Previous work on noise identification is limited to stationary noise and noise with slowly varying statistics only. An approach is presented here that is valid for nonstationary noise with rapidly or slowly varying statistics as well as stationary noise. This approach is based on the estimation with multiple hybrid system models. As one of the most cost-effective estimation schemes for hybrid system, the interacting multiple model (IMM) algorithm is used in this approach. The IMM algorithm has two desirable properties: it is recursive and has fixed computational requirements per cycle. The proposed approach is evaluated via a number of representative examples by both Monte Carlo simulations and a nonsimulation technique of performance prediction developed by the authors recently. The application of the proposed approach to failure detection is also illustrated     

Data fusion of decentralized local tracker outputs

An approach for fusing offboard track-level data at a central fusion node is presented. The case where the offboard tracker continues to update its local track estimate with measurement and system dynamics models that are not necessarily linear is considered. An algorithm is developed to perform this fusion at a central node without having access to the offboard measurements, their noise statistics, or the location of the local estimator. The algorithm is based on an extension of results that were originally established for linear offboard trackers. A second goal of this work is to develop an inequality constraint for selecting the proper sampling interval for the incoming state estimates to the fusion node. This interval is selected to allow use of conventional Kalman filter algorithms at the fusion node without suffering error performance degradation due to processing a correlated sequence of track state estimates     

The long term variability of 4U 1258-61 (GX304-1)

We present optical spectroscopy and photometry of 4U 1258-61 obtained over the course of six years. Evidence for the evolution of a circumstellar envelope throughout the course of the observations is presented.