Ultra-reliable real-time control systems-future trends

Today's aircraft use ultra-reliable real-time controls for demanding functions such as Fly-By-Wire (FBW) flight control. Future aircraft, spacecraft and other vehicles will require greater use of these types of controls for functions that currently are allowed to fail, fail to degraded operation, or require human intervention in response to failure. Fully automated and autonomous functions will require ultra-reliable control. But ultra-reliable systems are very expensive to design and require large amounts of on-board equipment. This paper will discuss how the use of low-cost sensors with digital outputs, digitally commanded fault-tolerant actuation devices and interconnecting networks of low-cost data buses offer the promise of more affordable ultra-reliable systems. Specific technologies and concepts to be discussed include low-cost automotive and industrial data buses, “smart” actuation devices with integral fault masking capabilities, management of redundant sensors, and the fault detection and diagnosis of the data network. The advantages of integrating the control and distribution of electrical power with the control system will be illustrated. The design, installation, and upgrade flexibility benefits provided by an all-digital and shared network approach will be presented. The economic benefits of systems that can operate following failure and without immediate repair will be reviewed. The inherent ability of these redundant systems to provide effective built-in test and self-diagnostics capabilities will be described. The challenges associated with developing ultra-reliable software for these systems and the difficulties associated with exhaustive verification testing will be presented as will additional development hurdles that must be overcome     

History of Time-Frequency Technology

Present-day collision avoidance systems (CAS) of the time-frequency variety employ modes of operation similar to those of airborne equipment which has been operating in military aircraft since 1959. A fleet operational evaluation of these systems began in 1961 in aircraft of U. S. Navy Helicopter Squadron HS-4, based on the aircraft carrier U.S.S. Yorktown. This equipment utilized a local clock in each aircraft, a separate time slot for each aircraft's interrogation signal, air-to-air coarse synchronization of all stations, and sufficient free-drift stability for time slot keeping. Operational use of one-way ranging with elimination of propagation delay offsets, higher clock stability for open-loop time keeping in the SNS-64 ... AN/APN-169 family of systems began in 1964 in U. S. Air Force C-130E turboprop aircraft. In 1965, use of the EROS I collision avoidance system began during flight testing of F-4 Phantom supersonic aircraft.     

One-to-one relationship between low latitude whistlers and conjugate source lightning discharges and their propagation characteristics

One-to-one relation with its causative lightning discharges and propagation features of night-time whistlers recorded at low-latitude station, Allahabad (geomag. lat. 16.05°N, L = 1.08), India, from continuous observations made during 1–7 April, 2011 have been studied. The whistler observations were made using the Automatic Whistler Detector (AWD) system and AWESOME VLF receiver. The causative lightning strikes of whistlers were checked in data provided by World-Wide Lightning Location Network (WWLLN). A total of 32 whistlers were observed out of which 23 were correlated with their causative lightnings in and around the conjugate location (geom. lat. 9.87°S) of Allahabad. A multi-flash whistler is also observed on 1 April with dispersions 15.3, 17.5 and 13.6 s^1/2. About 70% (23 out of 32) whistlers were correlated with the WWLLN detected causative lightnings in the conjugate region which supports the ducted mode of propagation at low latitude. The multi-flash and short whistlers also propagated most likely in the ducted mode to this station.     

Probing the first stars and black holes in the early Universe with the Dark Ages Radio Explorer (DARE)

A concept for a new space-based cosmology mission called the Dark Ages Radio Explorer (DARE) is presented in this paper. DARE’s science objectives include: (1) When did the first stars form? (2) When did the first accreting black holes form? (3) When did Reionization begin? (4) What surprises does the end of the Dark Ages hold (e.g., Dark Matter decay)? DARE will use the highly-redshifted hyperfine 21-cm transition from neutral hydrogen to track the formation of the first luminous objects by their impact on the intergalactic medium during the end of the Dark Ages and during Cosmic Dawn (redshifts z = 11–35). It will measure the sky-averaged spin temperature of neutral hydrogen at the unexplored epoch 80–420 million years after the Big Bang, providing the first evidence of the earliest stars and galaxies to illuminate the cosmos and testing our models of galaxy formation. DARE’s approach is to measure the expected spectral features in the sky-averaged, redshifted 21-cm signal over a radio bandpass of 40–120 MHz. DARE orbits the Moon for a mission lifetime of 3 years and takes data above the lunar farside, the only location in the inner solar system proven to be free of human-generated radio frequency interference and any significant ionosphere. The science instrument is composed of a low frequency radiometer, including electrically-short, tapered, bi-conical dipole antennas, a receiver, and a digital spectrometer. The smooth frequency response of the antennas and the differential spectral calibration approach using a Markov Chain Monte Carlo technique will be applied to detect the weak cosmic 21-cm signal in the presence of the intense solar system and Galactic foreground emissions.     

Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing

Inflatable/deployable structures are under consideration as habitats for future Lunar surface science operations. The use of non-traditional structural materials combined with the need to maintain a safe working environment for extended periods in a harsh environment has led to the consideration of an integrated structural health management system for future habitats, to ensure their integrity. This article describes recent efforts to develop prototype sensing technologies and new self-healing materials that address the unique requirements of habitats comprised mainly of soft goods. A new approach to detecting impact damage is discussed, using addressable flexible capacitive sensing elements and thin film electronics in a matrixed array. Also, the use of passive wireless sensor tags for distributed sensing is discussed, wherein the need for on-board power through batteries or hardwired interconnects is eliminated. Finally, the development of a novel, microencapuslated self-healing elastomer with applications for inflatable/deployable habitats is reviewed.     

The Solar Sail Materials (SSM) project – Status of activities

SSM (Solar Sail Materials) is an on-going project for the European Space Agency (ESA) relying on past and recent European solar sail design projects. It aims at developing and testing future technologies suitable for large, operational solar sailcrafts.