Power anomaly effects and costs in low-voltage mobile power systems

Electric power anomalies or disturbances can disrupt the normal operation of equipment, accelerate aging, or even cause outright failures thus resulting in increased costs of maintenance and reduced system reliability. Past research on the effects caused by power anomalies has been mostly focused on industrial, commercial, or residential systems, or on power distribution equipment. A literature survey reveals that there is no comprehensive review related to low-voltage (LV) power systems and utilization equipment applicable to military combat vehicles, such as aircraft and ships. This paper summarizes the results of a new literature survey that focused on the causes, effects, and mitigation methods for power anomalies typical of LV mobile power systems. Electric power anomaly cost data collected from the literature are also presented, from which the costs of anomalies to the national defense are estimated using some simple rationales.     

Advanced lithium ion battery charger

A lithium ion battery charger has been developed for four and eight cell batteries or multiples thereof. This charger has the advantage over those using commercial lithium ion charging chips in that the individual cells are allowed to be taper charged at their upper charging voltage rather than be cutoff when all cells of the string have reached the upper charging voltage limit. Since 30-60% of the capacity of lithium ion cells may be restored during the taper charge, this charger has a distinct benefit of fully charging lithium ion batteries by restoring all of the available capacity to all of its cells     

Appearance of neutron stars in the state of subsonic propeller

The state of subsonic propeller is intermediate between the states of supersonic propeller and accretor in the evolutionary tracks of magnetized compact stars. The rotational rate of a star at this stage decelerates due to the interaction between its magnetosphere and the surrounding hot, quasi-static plasma envelope. The magnetospheric radius is smaller than the corotation radius and the boundary of the magnetosphere is stable with respect to interchange instabilities. The rate of the mass flux from the inner radius of the envelope to the stellar surface is limited by the rate of plasma diffusion into the magnetic field of the star. As a result, the subsonic propeller would appear as a low-luminosity accretion-powered pulsar with a soft X-ray spectrum.     

Synthesis of biomass and utilization of plants wastes in a physical model of biological life-support system

The paper considers problems of biosynthesis of higher plants' biomass and "biological incineration" of plant wastes in a working physical model of biological LSS. The plant wastes are "biologically incinerated" in a special heterotrophic block involving Californian worms, mushrooms and straw. The block processes plant wastes (straw, haulms) to produce soil-like substrate (SLS) on which plants (wheat, radish) are grown. Gas exchange in such a system consists of respiratory gas exchange of SLS and photosynthesis and respiration of plants. Specifics of gas exchange dynamics of high plants--SLS complex has been considered. Relationship between such a gas exchange and PAR irradiance and age of plants has been established. Nitrogen and iron were found to the first to limit plants' growth on SLS when process conditions are deranged. The SLS microflora has been found to have different kinds of ammonifying and denitrifying bacteria which is indicative of intensive transformation of nitrogen-containing compounds. The number of physiological groups of microorganisms in SLS was, on the whole, steady. As a result, organic substances--products of exchange of plants and microorganisms were not accumulated in the medium, but mineralized and assimilated by the biocenosis. Experiments showed that the developed model of a man-made ecosystem realized complete utilization of plant wastes and involved them into the intrasystem turnover.     

共析钢的相变超塑性扩散连接

根据高温扩散和空洞蠕变闭合理论，在恒温超塑性扩散连接基础上建立相变超塑性扩散连接数学模型，可确定各工艺参数，诸如循环上限温度、压力、循环次数以及升、降温速率等对连接的影响，作为选择合适工艺参数的依据。经过对T8共析钢相变超塑性扩散连接试验研究，证明该理论模型与试验结果吻合较好。     

基于市场的最适宜质量水平模型

以企业利润最大化为目标，引入效用的概念，提出了一个基于市场的最适宜质量水平模型。该模型突破了现有的质量经济学理论仅以质量成本确定最适宜质量水平的模式，将质量水平与产品成本，效用和市场绩效联系起来，使模型具有更为方法的适用性，本文还就市场不确定性，消费者偏好，技术进步，市场竞争等因素对模型的影响展开了讨论，揭示了质量，销量，价格，成本，技术与竞争之间的关系，为企业产品决策，技术改造决策和质量策划提供了参考依据。     

提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。     

一种基于实体模型的三轴数控加工刀轨生成算法

实体模型是几何造型的高级模型，它具有完整的曲面拓扑关系，国内基本实体模型的数摈加工算法的需求日渐迫切，本文提出了一种适合实体模型的三轴数控加工刀位轨迹生成算法；首先根据加工行距作一组平行于刀轴的平面，与模型的待加工表面求交，得到一系列交线，再根据加工步长规划另一组与上述平面垂直且平行于刀轴的平面，与上述交线求交，得到一交点网格，判断刀具与数据点的位置关系从而得到刀位轨迹。     

基于批生产的逐段式车间作业调度算法

探讨了离散作业型（Job shop）车间中的作业调度的分阶段模型，并根据离散作业调度的阶段性提出了基于作业状态空间的逐段式车间作业调度算法，通过对一个实际车间作业调度仿真比较，此算法运算速度比最短加工时间（SPT）和最少工作量剩余（LWR）算法快，其调度结果在实际作业车间具有可执行性。