Survey of High-Power Microwave Filters

A summary of research and development work on high-power microwave filters is given here: first, design considerations in high-power microwave filters?power handling capacity, waveform distortion, multimode suppression, and stop and pass band characteristics; second, a discussion of filtering devices and techniques in two broad categories-dominant mode filters and harmonic filters (discussion covers methods of operation and significant characteristics of each filter developed to date); and third, a discussion of applications and limitations of filters in various systems and interference situations. Also included are the availability, cost, size, weight, etc. as functions of frequency for the various filter types.     

Studies of Logarithmic Radar Receiver Using Pulse-Length Discrimination

Using a logarithmic amplifier giving a detected output followed by a high-pass filter is a technique for reducing adverse effects of distributed clutter in radar receivers. A pulse-length discriminator (PLD) used as the high-pass filter is treated here. Theoretical and experimental results for the loss in detectability introduced by this receiver, as compared with a matched filter or a good approximation thereto, have been obtained. For the case of single-hit detection, losses of 4 to 8 dB are introduced by the logarithmic amplifier/pulse-length discriminator (LOG AMP/PLD) combination; for post-detection integration, the losses are reduced to 2 to 4 dB. The latter values would apply where the LOG AMP/PLD output is presented on a PPI (plan position indicator). Some experimental results of the ability of the LOG AMP/PLD receiver to reject signals of incorrect pulse length show that signals exceeding the design pulse length by more than 25 to 50 percent are effectively suppressed. No significant short-pulse discrimination is obtained from the receiver.     

Non-linear resonant excitation of whistler mode waves in the Earth's ionosphere

We examine the resonant non-linear interaction in the Earth's ionosphere of two powerful high frequency radio beams with frequencies f ₁ and f ₂ (both larger than the plasma frequency at F2_max) and wave numbers k ₁ and k ₂ such that a whistler mode wave can be excited with a frequency f ₃ = f ₁ — f ₂ and a wave number k ₃ = k ₁ – k ₂. The feasibility of an effective ground based installation, sited at low latitudes, is discussed and the field strength of the wave emerging from a 10 km wide ionospheric region illuminated by the beams is evaluated for a range of transmitted frequencies, beam orientations and plasma frequencies in the interaction region. It is suggested that the longitude dependence of the enhancement of VLF noise bands detected by the Ariel 3 satellite may be due to a non-linear interaction of this type between any two or more medium wavelength signals from areas where there is a high concentration of commercial broadcasting stations, such as the NE region of the U.S.A.     

Optimal Inputs for Nonlinear Process Parameter Estimation

The sensitivity of observed data to an unknown parameter is enhanced by utilizing optimal inputs. The derivation is given for the optimal input of an nth-order nonlinear differential equation. To obtain the optimal input, the solution of 4n two-point boundary value equations is required. Numerical resutis are given for a second order linear example. The optimal return is compared with the return obtained for a step input. The existence of a critical time length is demonstrated.     

An Automatic Timing Receiver System Based on the Loran-C Navigational Network

This paper describes some new concepts in dealing with the circuitry for Loran-C automatic timing systems. The conventional analog techniques associated with phase-adjusting networks have been replaced by an incremental digital phase-shifting device. The Loran-C period generator includes facilities for delay compensation by means of an epoch monitor producing a 1-Hz output coincident with the master station TOC (time of coincidence). The required initial time information has to be accurate within ± 20 ms. The automatic format identification and decoding equipment together form a system which takes into account the information of every Loran-C pulse. Owing to the use of digital signal treatment, the synchronization accuracy is limited only by the resolution of the incremental phase shift. The automatic cycle selection device is based on sampling techniques where the derivative of the envelope is calculated. The time of coincidence has to be precalculated and fed into the thumbwheel memory of the epoch monitor, which is automatically initiated when the synchronizing operations are concluded. For VLBI purposes and transcontinental use, the accuracy of this system will be better than 1 ?s when post corrections, supplied by the U.S. Naval Observatory, are taken into account.     

Modified Generalized Sign Test Processor for 2-D Radar

The modified generalized sign test processor is a nonparametric, adaptive detector for 2-D search radars. The detector ranks a sample under test with its neighboring samples and integrates (on a pulse-to-pulse basis) the ranks with a two-pole filter. A target is declared when the integrated output exceeds two thresholds. The first threshold is fixed and yields a 10-6 probability of false alarm when the neighboring samples are independent and identically distributed. The second threshold is adaptive and maintains a low false-alarm rate when the integrated neighboring samples are correlated and when there are nonhomogeneities, such as extraneous targets, in the neighboring cells. Using Monte Carlo techniques, probability of false-alarm results, probability of detection curves, and angular accuracy curves have been generated for this detector. The detector was built and PPI photographs are used to indicate the detector's performance when the radar is operated over land clutter.     

The Segmented Aperture Synthetic Aperture Radar (SASAR)

A new concept in synthetic aperture radar, called SASAR, which uses a segmented aperture, is described. Use of the segmented aperture allows appreciable extra receiving antenna gain to be realized. Each subarray of the receive antenna is equal in length to the transmit antenna; the system performance is increased approximately by a factor equal to the number of subarrays. To allow array combination of the subarray signal outputs requires a phase-shift factor (varying with azimuth) to be applied to each subarray signal. A digital implementation of this preprocessor is sketched out; it uses a push-down storage stack to store the range histories for a synthetic aperture from each subarray. Appropriate phase shifts are added to the stacks and a sum of stack values then provides the combined output range history sequence. Possibilities of using analog delay lines for preprocessing are also discussed. Pattern errors due to subarray size and receive array near field are examined and constraints are given.