Periodic components in Cyg X-3

Hard X-ray observations of Cyg X-3 in the energy range 20–100 keV were made with a Balloon-borne telescope using two large area proportional counters. The source was seen with a total significance of 20.

A 121 s periodicity was seen during Fourier analysis of the data. The phenomenon can be interpreted as due to transient pulsation since no other peak was seen in our data. Quasi-periodic oscillation in the range 0.06–20 mHz have been observed from Cyg X-3 at lower energies. Interestingly, most of the reported periods are multiple of the present measurements. The observed pulsation at high energies indicate the occasional unstable behaviour of the inner parts of the accretion disk connected with the basic rotation period of the compact object.

The 4.8^h modulation, characteristic of the orbital period of the binary system was seen in the data, with a broad maximum between the phase 0.3 to 0.7.     

Improved bolometric corrections for WR stars

Evolutionary models allow an assignment of both a mass and a luminosity to a Wolf-Rayet (WR) star in a cluster, and hence allow a determination of the Bolometric Correction (B.C.). The B.C.'s derived for WN stars range from –4.0 to –6.0 with the expected trend of larger values (in absolute values) for stars with higher excitation spectra. For WC stars, there is little evidence for a similar trend; most observations presented here are consistent with B.C.=–4.5, as found by Smith and Maeder (1989). The convergence of B.C. values derived from evolutionary and atmospheric models is extremely satisfactory, giving increased confidence in both methods.     

Deriving the spin rate/orientation from the quiescent spacecraft ABRIXAS using optical observations

With the loss of the battery system of ABRIXAS shortly after launch and consequent absence of telemetry, there was urgent need to determine ABRIXAS' spin rate and orientation in order to assess the possibility of re-establishing telemetry during periods of full-Sun orbits. We, therefore, conducted optical and video observations of ABRIXAS passages with a 1-second time resolution, and later simulated the optical appearance of ABRIXAS for several passages based on a three-dimensional model of the reflectivity properties of the 2.5m × 1.8m × 1.2m size-satellite. Here we present the results of the comparison of our grid of light curve models with the observations and show (i) how the spin rate of ABRIXAS slowed down between June and December 1999 and (ii) what information can be deduced on the temporal change of the orientation of the spin axis. We conclude with discussing the benefit of using ground based optical observation as a cost effective way to develop information about the orientation of a satellite when there is no telemetry.     

Implications of previous space commercialization experiences for the reusable launch vehicle

In evaluating the prospects for the development of a commercially viable RLV, it may be useful to examine ’lessons learned‘ from previous space commercialization efforts– both those that succeeded and those that did not. It can be argued that several distinct streams of market and technological development may have to converge for successful commercialization of space systems to occur. Factors influencing the prospects for commercialization include the size and growth rate of the potential customer base, the extent to which a governmental customer exists to underpin the market, the development of associated ’value-added‘ markets, the stability of governmental policies, the availability of enabling or enhancing infrastructure, the levels of technological and business risk, and the degree to which competitive markets exist. This paper examines two previous space commercialization experiences, evaluates the relative importance of the various factors that influence the prospects for success of commercialization efforts, and assesses the implications of those factors for the commercial viability of the proposed RLV.     

Inactivation, mutation induction and repair in Bacillus subtilis spores irradiated with heavy ions.

Studies on the response of bacterial spores to accelerated heavy ions (HZE particles) help in understanding problems of space radiobiology and exobiology. Layers of spores of Bacillus subtilis strains, differing in repair capabilities, were irradiated with accelerated boron, carbon and neon ions of linear energy transfer (LET) values up to 14000 MeV cm2/g. Inactivation as measured by loss of colony forming ability and induction of mutations as measured by reversion to histidine prototrophy and resistance to 150 micrograms/ml sodium azide were tested, as well as the influence of repair processes on these effects. For inactivation, the cross-sectional values sigma plotted as a function of LET follow a saturation curve. The plateau, which is reached around a LET of 2000 MeV cm2/g, occurs at 2.5 x 10(-9) cm2, a value in good agreement with the dimensions of the spore protoplast. Lethal damage produced at LET values < 2000 MeV cm2/g is reparable. Recombination repair is more effective than excision repair. At higher LET values, lethal damage could not be reconstituted by the repair mechanisms studied. In addition, at these high LET values, the frequency of induced mutations was drastically decreased. The data support the assumption of at least two qualitatively different types of lesion, depending on the LET of the affecting heavy ion.     

An Optimally Integrated Track Recovery System for Aerial Bathymetry

An airborne system has been developed for charting shallow coastal and inland waters. The primary components of this system are an aerial survey camera, a profiling laser radar, an analytical stereo plotter, and a multisensor track recovery system (TRS). The TRS comprises a gimbaled inertial navigation system and a number of auxiliary sensors which acquire redundant position and attitude information. The sensor data are combined postmission using a U-D factorized Kalman filter and modified Bryson-Frazier smoother to compute accurate estimates of the orientation parameters of the survey camera at the times of film exposure. These parameters are used to position each overlapping pair of photographs on the analytical plotter to form a stereo image and corresonding analytical stereomodel from which water depth measurements are made. Flight trial results demonstrate that the TRS can achieve radial position and attitude accuracies which exceed 1 m and 2 arcmin root mean square (rms), respectively, and that this level of performance is sufficient to enable water depth measurements to be made to an accuracy of better than 0.65 m (rms).     

Solar and stellar seismology

This article reviews solar and stellar seismology, with emphasis on the enormous progress which has been made recently in the observation and understanding of solar p-modes. Precision measurements of p-mode frequencies and frequency splittings allow a greater understanding of the structure of the solar interior, while p-mode amplitudes and linewidths shed light on the mode excitation mechanism, which is probably stochastic excitation by turbulent convection. The prospects for making similar measurements on other stars are also discussed.     

Space Station atmospheric monitoring systems.

A technology assessment study on atmospheric monitoring systems was performed by Battelle Columbus Division for the National Aeronautics and Space Administration's John F. Kennedy Space Center under Contract No. NAS 10-11033. In this assessment, the objective was to identify, analyze, and recommend systems to sample and measure Space Station atmospheric contaminants and identify where additional research and technology advancements were required. To achieve this objective, it was necessary to define atmospheric monitoring requirements and to assess the state of the art and advanced technology and systems for technical and operational compatibility with monitoring goals. Three technical tasks were defined to support these needs: Definition of Monitoring Requirements, Assessment of Sampling and Analytical Technology, and Technology Screening and Recommendations. Based on the analysis, the principal candidates recommended for development at the Space Station's initial operational capability were: (1) long-path Fourier transform infrared for rapid detection of high-risk contamination incidences, and (2) gas chromatography/mass spectrometry utilizing mass selective detection (or ion-trap) technologies for detailed monitoring of extended crew exposure to low level (ppbv) contamination. The development of a gas chromatography/mass spectrometry/matrix isolation-Fourier transform infrared system was recommended as part of the long range program of upgrading Space Station trace-contaminant monitoring needs.     

Design for testability for future digital avionics systems

The authors describe an integrated testing approach called the Maintenance and Diagnostic System (MADS), which was developed for digital avionics systems using VHSIC and semicustom devices. Mission/operational requirements dictate high availability with capability to detect 98% of all faults and isolate 90% of these faults to a line replacement module (LRM) or 95% of the faults to two LRMs. MADS achieves these goals by defining a module maintenance node (MMN) chip set for each LRM in the system and the design for testability concepts for hardware. The MMN aids parallel, high-speed testing of LRMs, isolating the fault(s) to a module/chip level while incurring less than 10% overhead. It uses the concepts of scan set design, pseudorandom test vector generation, output response compression, and separate scan set loops to test the SSI-MSI logic on the LRM. It also stores interim test results and run-time fault information to isolate the hard-to-reproduce failures and performs verification of interchip and intermodule wiring     

Computational Precision Requirements for Optimal Weights in Adaptive Processing

The required accuracy for computing the estimated optimum weights of an adaptive processor has been analyzed by investigating the effects of errors in computing the inverse matrix. It is shown that the required precision depends upon the matrix. An equation for the general case is derived. Several special cases are considered in detail. It is shown that the case of a single interference source requires the highest precision. The least stressing case is identifi'ed and compared to the worst case. The requirements for a "typical" case are also considered. A comparison of the requirements for the covariance matrix estimation technique and for adaptive weight implementation using gradient descent techniques is given. It is shown that there is a dichotomy in that cases that do not stress one technique tend to stress the other.