On phased-array radar tracking and parameter control

Based on a simple model of a ground-based phased-array radar used for a multiple-target surveillance task, beam scheduling, positioning, and radar parameters like signal-to-noise ratio, track sharpness, and detection threshold have been optimized with respect to the radar/computer load induced by tracking. From this the minimum energy necessary for track maintenance during surveillance can be derived     

A low-cost space-based radar system concept

A space-based radar system concept is described that can provide continuous world-wide, all-weather, day-night observation and tracking of ships, aircraft, vehicles and ground facilities of interest. The system employs a constellation of radar satellites in low-earth orbit to provide continuous world-wide target access. The radars employ reflector antennas, TWT transmitters and high frequency (e.g., X band) to achieve long range with relatively low weight, complexity and cost. The radars operate in moving-target-detection (MTD) and synthetic-aperture-radar (SAR) spotlight imaging modes to observe moving and fixed targets, respectively. The system could support a wide range of military, intelligence, law-enforcement and civilian missions     

Ambiguity resolution of multiple targets using pulse-Dopplerwaveforms

To cancel clutter, both medium-PRF waveforms which are ambiguous in both range and Doppler and high-PRF waveforms which are ambiguous in range but unambiguous in ambiguities, a previous paper has shown that superior results for a single target can be achieved by using a clustering algorithm. Here, the problem of multiple targets is considered. A maximum likelihood (ML) technique which incorporates the clustering algorithm is developed for the multiple target problem. Simulation results show that four targets which have the same speed but are at different ranges can be resolved by using a medium-PRF waveform and employing the ML resolution technique     

Probing solar and stellar interior dynamics and dynamo

Solar and stellar activity is a result of complex interaction between magnetic field, turbulent convection and differential rotation in a star’s interior. Magnetic field is believed to be generated by a dynamo process in the convection zone. It emerges on the surface forming sunspots and starspots. Localization of the magnetic spots and their evolution with the activity cycle is determined by large-scale interior flows. Thus, the internal dynamics of the Sun and other stars hold the key to understanding the dynamo mechanism and activity cycles. Recently, significant progress has been made for modeling magnetohydrodynamics of the stellar interiors and probing the internal rotation and large-scale dynamics of the Sun by helioseismology. Also, asteroseismology is beginning to probe interiors of distant stars. I review key achievements and challenges in our quest to understand the basic mechanisms of solar and stellar activity.     

Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

Origin of organic compounds in carbonaceous chondrites.

Carbonaceous chondrites, a class of primitive meteorite, have long been known to contain their complement of carbon largely in the form of organic, i.e., hydrocarbon-related, matter. Both discrete organic compounds and an insoluble, macromolecular material are present. Several characteristics of these materials provide evidence for their abiotic origin. The principal formation hypotheses have invoked chemistry occurring either in the solar nebula or on the parent body. However, recent stable isotope analyses of the meteorite carboxylic acids and amino acids indicate that they may be related to interstellar cloud compounds. These results suggest a formation scheme in which interstellar compounds were incorporated into the parent body and subsequently converted to the present suite of meteorite organics by the hydrothermal process believed to have formed the clay minerals of the meteorite matrix.     

Free radicals induced in solid DNA by heavy ion bombardment.

Free radical formation after heavy-ion bombardment was studied in solid, polycristalline pellets of DNA-constituents by analysing the dose-yield curves and the spectra obtained by ESR-spectroscopy at low (< 100 K) and ambient temperatures. The dose-yield curves were found to correlate with those found after X-irradiation but shifted to higher doses and lower saturation concentrations. The corresponding radical yields (per 100 eV) exhibit values which are one to two orders of magnitudes lower. The structural aspects as revealed from powder ESR-spectra gave a complex inter-relation between substance, LET, dose and irradiation temperature, which is discussed in terms of mechanistic models.     

The Scanning Sky Monitor (SSM) on ASTROSAT

The Scanning Sky Monitor is one of the experiments onboard the ASTROSAT, an Indian multiwavelength astronomy satellite mission. This experiment will detect and monitor X-ray transients in the energy band 2–10 keV. It is similar in design to the ASM on RXTE. It consists of position-sensitive proportional counters with one-dimensional mask. We describe the configuration of the experiment. We also discuss some of the results obtained using a detector which has already been fabricated and tested in our laboratory.     

Assessing exposure to cosmic radiation on board aircraft.

The assessment of exposure to cosmic radiation on board aircraft is one of the preoccupations of organizations responsible for radiation protection. The cosmic radiation particle flux increases with altitude and latitude and depends on the solar activity. The radiation exposure has been estimated on several airlines using transatlantic, Siberian and transequatorial routes on board subsonic and supersonic aircraft, to illustrate the effect of these parameters. Measurements have been obtained with a tissue equivalent proportional counter using the microdosimetric technique. Data have been collected at maximum solar activity in 1991-92 and at minimum in 1996-98. The lowest mean dose rate measured was 3 microSv/h during a Paris-Buenos Aires flight in 1991; the highest was 6.6 microSv/h during a Paris-Tokyo flight using a Siberian route and 9.7 microSv/h on Concorde in 1996-97. The mean quality factor is around 1.8. The corresponding annual effective dose, based on 700 hours of flight for subsonic aircraft and 300 hours for Concorde, can be estimated between 2 mSv for least-exposed routes and 5 mSv for more exposed routes.     

Performance and reliability of the NASA Biomass Production Chamber.

The Biomass Production Chamber (BPC) at the Kennedy Space Center is part of the Controlled Ecological Life Support System (CELSS) Breadboard Project. Plants are grown in a closed environment in an effort to quantify their contributions to the requirements for life support. Performance of this system is described. Also, in building this system, data from component and subsystem failures are being recorded. These data are used to identify problem areas in the design and implementation. The techniques used to measure the reliability will be useful in the design and construction of future CELSS. Possible methods for determining the reliability of a green plant, the primary component of a CELSS, are discussed.