Performance and reliability of the NASA Biomass Production Chamber.

The Biomass Production Chamber (BPC) at the Kennedy Space Center is part of the Controlled Ecological Life Support System (CELSS) Breadboard Project. Plants are grown in a closed environment in an effort to quantify their contributions to the requirements for life support. Performance of this system is described. Also, in building this system, data from component and subsystem failures are being recorded. These data are used to identify problem areas in the design and implementation. The techniques used to measure the reliability will be useful in the design and construction of future CELSS. Possible methods for determining the reliability of a green plant, the primary component of a CELSS, are discussed.     

Galactic cosmic ray transport methods: past, present, and future.

The development of the theory of high charge and energy (HZE) ion transport is reviewed. The basic solution behavior and approximation techniques will be described. An overview of the HZE transport codes currently available at the Langley Research Center will be given. The near term goal of the Langley program is to produce a complete set of one-dimensional transport codes. The ultimate goal is to produce a set of complete three-dimensional codes which have been validated in the laboratory and can be applied in the engineering design environment. Recent progress toward completing these goals is discussed.     

Cognitive deficits induced by 56Fe radiation exposure.

Exposing rats to particles of high energy and charge (e.g., 56Fe) disrupts neuronal systems and the behaviors mediated by them; these adverse behavioral and neuronal effects are similar to those seen in aged animals. Because cognition declines with age, and our previous study showed that radiation disrupted Morris water maze spatial learning and memory performance, the present study used an 8-arm radial maze (RAM) to further test the cognitive behavioral consequences of radiation exposure. Control rats or rats exposed to whole-body irradiation with 1.0 Gy of 1 GeV/n high-energy 56Fe particles (delivered at the alternating gradient synchrotron at Brookhaven National Laboratory) were tested nine months following exposure. Radiation adversely affected RAM performance, and the changes seen parallel those of aging. Irradiated animals entered baited arms during the first 4 choices significantly less than did controls, produced their first error sooner, and also tended to make more errors as measured by re-entries into non-baited arms. These results show that irradiation with high-energy particles produces age-like decrements in cognitive behavior that may impair the ability of astronauts to perform critical tasks during long-term space travel beyond the magnetosphere.     

A program to measure new energetic particle nuclear interaction cross sections.

The Transport Collaboration, consisting of researchers from institutions in France, Germany, Italy and the USA, has established a program to make new measurements of nuclear interaction cross sections for heavy projectiles (Z > or = 2) in targets of liquid H2, He and heavier materials. Such cross sections directly affect calculations of galactic and solar cosmic ray transport through matter and are needed for accurate radiation hazard assessment. To date, the collaboration has obtained data using the LBL Bevalac HISS facility with 20 projectiles from 4He to 58Ni in the energy range 393-910 MeV/nucleon. Preliminary results from the analysis of these data are presented here and compared to other measurements and to cross section prediction formulae.     

Suboptimal joint probabilistic data association

A significant problem in multiple target tracking is the hit-to-track data association. A hit is a received signal from a target or background clutter which provides positional information. If an incorrect hit is associated with a track, that track could diverge and terminate. Prior methods for this data association problem include various optimal and suboptimal two-dimensional assignment algorithms which make hit-to-track associations. Another method is to assign a weight for the reasonable hits and use a weighted centroid of those hits to update the track. The method of weighting the hits is known as joint probabilistic data association (JPDA). The authors review the JPDA approach and a simple ad hoc approximation and then introduce a new suboptimal JPDA algorithm. Examples which compare an optimal two-dimensional assignment algorithm with the ad hoc and the new suboptimal JPDA formulation are given     

Performance analysis for DOA estimation algorithms: unification,simplification, and observations

Subspace based direction-of-arrival (DOA) estimation has motivated many performance studies, but limitations such as the assumption of an infinite amount of data and analysis of individual algorithms generally exist in these performance studies. The authors have previously proposed a unified performance analysis based on a finite amount of data and achieved a tractable expression for the mean-squared DOA estimation error for the multiple signal classification (MUSIC). Min-Norm, estimation of signal parameters using rotational invariance techniques (ESPRIT), and state-space realization algorithms. However, this expression uses the singular values and vectors of a data matrix, which are obtained by the highly nonlinear transformation of the singular value decomposition (SVD). Thus the effects of the original data parameters such as numbers of sensors and snapshots, source coherence and separations were not explicitly analyzed. The authors unify and simplify this previous result and derive a unified expression based on the original data parameters. They analytically observe the effects of these parameters on the estimation error     

Image texture synthesis-by-analysis using moving-average models

A synthesis-by-analysis model for texture replication or simulation is presented. This model can closely replicate a given textured image or produce another image that although distinct from the original, has the same general visual characteristics and the same first and second-order gray-level statistics as the original image. The texture synthesis algorithm, proposed contains three distinct components: a moving-average (MA) filter, a filter excitation function, and a gray-level histogram. The analysis portion of the texture synthesis algorithm derives the three from a given image. The synthesis portion convolves the MA filter kernel with the excitation function, adds noise, and modifies the histogram of the result. The advantages of this texture model over others include conceptually and computationally simple and robust parameter estimation, inherent stability, parsimony in the number of parameters, and synthesis through convolution. The authors describe a procedure for deriving the correct MA kernel using a signal enhancement algorithm, demonstrate the effectiveness of the model by using it to mimic several diverse textured images, discuss its applicability to the problem of infrared background simulation, and include detailed algorithms for the implementation of the model     

Market-based systems for instrument development and science planning

Market-based systems are those systems in which currency is used to express demand for a limited resource. In these systems, users `own' currency and exchange it for a desired commodity. Though used for thousands of years, market-based applications to space missions are still in their infancy. The first successful application was in 1992 with the Cassini Mission to Saturn. In this case, the sum total of mass and dollars for the science instruments had to fit within the allocated resource envelope. Results from the use of a market-based system show that the entire science payload grew from original estimates by only +1% for cost, and by –7% for mass. The next application was for Space Shuttle Secondary Payloads. In this application, available shuttle lift mass, number of lockers for secondary payloads, and available astronaut time had to be allocated between 5 NASA Users. Experiments showed that a market-based system can reduce the size of the required workforce needed to produce a manifest of the same quality as one produced `by committee.' Finally, a market-based system was experimentally applied to LightSAR science planning, a proposed joint NASA/Commercial RADAR mission. In this application, users were able to produce a conflict-free timeline of events remotely, of high science value, in about half the time required by more traditional methods.     

A two-dimensional position-sensitive spectroscopic proportional counter for balloon-borne hard X-ray astronomy

A new design of position sensitive spectroscopic proportional counter is described, for use in a balloon borne hard x-ray telescope. Initial position and spectral resolution data from a one-dimensional laboratory prototype are reported. With this device, the final telescope will have an angular resolution of better than 10 minutes of arc.     

Design study for a three-meter balloon-borne telescope for far infrared and submillimeter astronomy

A NASA supported design study is being carried out for a three-meter balloon-borne far infrared and submillimeter telescope. The goal of this project is to provide a facility for frequent flights for photometry, spectroscopy, and imaging in the spectral region 30 micrometers to 1 millimeter. It is intended to provide a scientific and technical step on the way to a large submillimeter telescope in space in the future. The study is concentrating on areas where technical advances are required: materials and fabrication techniques for lightweight primary mirrors, telescope and gondola structure, and pointing and stabilization. We are carrying out a design optimization and environmental test program of state-of-the-art carbon fiber reinforced plastic sandwich panels in collaboration with Dornier Systems. Similar efforts are being pursued for very lightweight molded glass mirrors. Innovative approaches to the telescope support and stabilization are being explored for achieving the required 1 arcsecond pointing stability.