Dosimetric mapping inside BIORACK

The experiment was flown in different locations inside BIORACK on the D1 mission. It contained different plastic detectors (cellulose nitrate, Lexan, and CR 39) and emulsions to measure the high LET components of the radiation environment. For low LET measurements thermoluminescence dosimeters (L iF) were used. The paper gives data about total dose, charge, energy, and LET spectra so far obtained. These data are compared with data of previous spaceflights.     

Embryogenesis and organogenesis of Carausius morosus under spaceflight conditions

The influence of cosmic radiation and/or microgravity on insect development was studied during the 7 day German Spacelab Mission D1. Eggs of Carausius morosus of five stages differing in sensitivity to radiation and in capacity to regeneration were allowed to continue their development in the BIORACK 22°C incubator, either at microgravity conditions or on the 1 g reference centrifuge. Using the Biostack concept - eggs in monolayers were sandwiched between visual track detectors - and the 1 g reference centrifuge, we were able to separate radiation effects from microgravity effects and also from combined effects of these two factors in space. After retrieval, hatching rates, growth kinetics and anomaly frequencies were determined in the different test samples. The early stages of development turned out to be highly sensitive to single hits of cosmic ray particles as well as to the temporary exposure to microgravity during their development. In some cases, the combined action of radiation and microgravity even amplified the effects exerted by the single parameters of space. Hits by single HZE particles caused early effects, such as body anomalies, as well as late effects, such as retarded growth after hatching. Microgravity exposure lead to a reduced hatching rate. A synergistic action of HZE particle hits and microgravity was established in the unexpectedly high frequency of anomal larvae. However, it cannot be excluded, that cosmic background radiation or low LET HZE particles are also causally involved in damage observed in the microgravity samples.     

工件表面轮廓均方根斜率的光散射测量

描述并确定具有明显纹理粗糙表面均方根斜率的光散射技术(均方根斜率是联合表面轮廓高度和波长特性的混合参数)。称为散射光锥法(The scattered light-conemethod)的该技术是基于激光角散射检测阵列(DALLAS——Defector Array for Laser LishtAngular Scattering),它用于测量粗糙表面散射光角分布的仪器。均方根斜率是从DALLAS光散射图象的角宽得到的。一般可以发现角宽(即估计的均方根斜率)对光的入射角和散射角变化相当大时是不敏感的。这些结果与表面材料无关,并且对正弦和随机粗糙表面都是有效的。介绍了散射光锥法的测量原理、实验、数据分析和几点结论。     

SIGMA observations of hard X-ray and soft gamma-ray emission from X-ray binaries

After more than two years of operation, the imaging γ-ray SIGMA telescope has accumulated several days of observation toward well known X-ray binaries. Four bright sources falling in this category have been detected so far: The pulsar GX 1+4 near the center of our galaxy, the stellar wind accreting system 4U 1700-377, and the black hole candidates Cygnus X-1 and GX 339-4. Moreover, SIGMA have observed three transients sources, which turned out to be also hard X-ray sources : The burster KS 1731-260, Tra X-1, and the Musca Nova. The properties of these systems in the SIGMA domain will be reviewed and a spectral distinction between black holes and neutron stars will be sketched.     

基于RBF神经网络的非线性观察器设计

提出了一种新的非线性观察器设计方法。与一般方法采用神经网络逼近整个非线性系统不同，该方法用RBF神经网络逼近系统的非线性项，故提高了状态估计的精度。基于李亚普诺夫方法，证明了状态估计误差渐近稳定且渐近收敛到零。仿真结果表明，所提出的非线性观察器设计方法具有良好的性能。在故障检测、状态估计等领域具有广泛的应用前景。     

飞机尾流控制的SPIV实验研究

利用简化的飞机模型,通过改变尾翼的迎角及展弦比,试图建立一种能加速自我消亡的尾流涡系统.该实验在拖曳水槽中进行,运用SPIV(体视粒子图像测速技术)系统进行测量,获得了一系列空间切面的2D/3C(二维/三分量)数据,给出了三种不同尾翼情况(两种有尾翼情况及一种无尾翼情况)下的SPIV观测结果,并将这几种情况作了对比.     

基于磨粒分析方法的发动机磨损故障智能诊断技术

磨粒是研究磨损状态时最直接、最重要的信息元，通过对滑油中的磨粒进行监测与分析来判断机械设备的磨损情况，可以预防并监测机械设备的磨损故障。本文运用显微形态学方法建立了一套磨粒显微特征描述体系，以提取磨粒信息并进行磨损故障的模式识别；并结合摩擦学理论和人工智能方法，实现对发动机磨损故障的智能诊断和预测。     

含连续／离散变量结构优化中的神经网络与变尺度模拟退火方法

传统的优化方法难于有效地处理含有连续／离散混合变量优化问题，本文介绍了一种改进的变尺度模拟退火方法并与人工神经网络能量函数模型相结合，用于求解含连续／离散设计变量的工程结构优化问题，较好地解决了模拟退火技术用于工程结构优化时选取具有全局性的初始点困难及迭代次数较多的弱点。算例表明，该方法可以使模拟退火算法从局部最优的陷阱中跳出，最后求出整体最优解。     

一种新的射频仿真目标位置控制方法与软件研究

针对射频目标仿真系统中目标位置的控制，本文通过对国内外目标位置控制的常用方法进行研究，提出一种新的通用目标位置控制方法，该方法适用于任何天线分布的面阵。利用这种新的方法编写了基于三元阵天线阵面的射频仿真目标位置控制软件，实现对多目标在天线阵面上多种轨迹运动下的高速准确的定位，并能实时监视目标的运动状态和运动轨迹。     

惩罚函数法在发动机性能计算中的应用

按照涡喷发动机工作时遵守的气动热力学定律，建立了发动机的稳定数学模型，并针对双轴涡轮发动机性能计算的非线性数学模型，利用优化和最优控制理论中的惩罚函数法，对发动机性能进行了基于约束的最优求解程序设计，利用程序对某型发动机的稳定飞行特性进行了计算，计算结果表明，使用惩罚函数法求出的特性曲线变化规律正确，发动机平衡方程的解的精度更高，在此基础上得出的发动机飞行特性也更准确。另外惩罚函数法对初值的要求很低，迭代运算不易发散。