轴向载荷下复合材料元件吸能能力的试验研究

试验研究了三种结构形式的复合材料元件在轴向准静态载荷下的压溃过程和能量吸收能力。通过组试件在轴向准静态载荷下的压溃试验，研究复合材料的缓冲吸能机理，对吸能能力进行了定义，并对试件的峰值截荷、持续压溃载荷和吸能能力等作了定量分析。     

金属零件的一种快速成型制造方法

金属零件的快速制造是快速成型技术的最终目标之一,也是当今快速成型领域的一大研究热点。本文在介绍快速成型技术的一个重要分支－选区激光烧结的基础上,提出了一种基于小功率激光快速成型系统的金属零件成型工艺。这种方法首先烧结金属与有机粘结剂的混合粉末,生成“绿件”,而后除粘、熔渗金属,最终得到致密的金属件。最后,文中给出了加工实例,并对这种工艺的影响因素进行了详细的分析与讨论。     

基于聚束照射SAR成像算法的条带SAR数据处理

为实现聚束照射合成孔径雷达（SAR）与条带模式SAR成像算法上的统一，本文利用两种模式之间的内在联系，将条带模式SAR数据分块处理，等效成聚束模式数据。然后，用聚束照射SAR成像算法实现条带数据的成像处理。针对具体数据，文中还对成像区大小的选择作了分析，并推导出成像长度与滤波器带宽应当满足的关系式。包场数据的处理严格证实了理论分析并验证了本文运用的方法。     

飞机穿越微下击暴流风切变的智能控制

在应用模糊逻辑建模与辨识方法建立微下击暴流风切变模型的基础上，根据恒定俯仰姿态改出微下击暴流的飞行引导策略，提出了一种改出微下击暴流风切变的模糊反馈控制系统，并将遗传算法应用于该模糊逻辑控制器的设计。结果表明，本文提出的建模方法能够更真实地反映出飞机穿越微下击暴流风场的动态特性；采用模糊逻辑控制器，可使得飞机在穿越微下击暴流风场时具有较好的改出性能；另外，遗传算法的应用对已设计的模糊逻辑控制器进行了优化，进一步改善了飞机穿越微下击暴流的性能。     

基于批生产的逐段式车间作业调度算法

探讨了离散作业型（Job shop）车间中的作业调度的分阶段模型，并根据离散作业调度的阶段性提出了基于作业状态空间的逐段式车间作业调度算法，通过对一个实际车间作业调度仿真比较，此算法运算速度比最短加工时间（SPT）和最少工作量剩余（LWR）算法快，其调度结果在实际作业车间具有可执行性。     

一种新颖组合变换器拓扑研究与应用

基于电源模块并联和串联的思想，提出了一种新颖双管正激组合变换器拓扑，克服了双管正激变换器副边二极管电压应力过高，输出电压和电流脉动大，只能应用于输出中低压场合的缺点，具有副边二极管电压应力低，可靠性高，原边开关管电流应力低，输出电压和电流脉动小，磁芯元件体积小等优点，本文对该新颖组合变换器进行分析，仿真和实验，表明适合应用于输入中，高电压，输出高压，大电流场合，并成功应用于某型飞机6KVA逆变器前级变换器，各项技术指标均符合设计要求。     

快速可重构信息系统的框架研究(英文)

变化和重构是快速可重构信息系统 (RRIS)的两个核心概念 ,RRIS对变化的适应或演化能力使它优于传统信息系统。本文首先提出 RRIS的体系结构 ,然后以 RRIS框架为重点 ,讨论框架的定义、分类及设计 ,研究框架的构成、构成元素 (业务构件 )的设计及构件如何在构架的组织下协调地安插在 CORBA的软总线上 ,实现类似硬件IC的即插即用。构件在框架上即插即用的灵活机制及热点构件 (反映变化 )的灵活运用 ,提高了框架的可扩展性、可定制性 ,从而提高了 RRIS适应变化的可重构性。     

Spacecraft survivability in the natural debris environment near the stable Earth-Moon Lagrange points

The theoretical analysis of the motion of natural space debris near the stable Earth-Moon Lagrange Points, $L_4$ and $L_5$, is presented with a focus on the potential debris risks to spacecraft operating near these points. Specifically, the research formulates a debris propagation model using four-body dynamics, then applies candidate probabilistic survivability models to a notional spacecraft operating at the $L_4$ and $L_5$ Lagrange points to quantify the collision risks to the spacecraft from natural debris particles. Of the survivability models implemented, the natural debris collision risks to spacecraft survivability are found to be incredibly low, but mitigation strategies to reduce the risk further are identified in this study. Overall, research into stable Lagrange point natural debris propagation improves understanding of the collision risks posed by the naturally occurring Kordylewski clouds and enhances operational planning for Lagrange point space missions.     

A Twin-CME Scenario for Ground Level Enhancement Events

Ground Level Enhancement (GLEs) events are extreme Solar Energetic Particle (SEP) events. Protons in these events often reach ～GeV/nucleon. Understanding the underlying particle acceleration mechanism in these events is a major goal for Space Weather studies. In Solar Cycle 23, a total of 16 GLEs have been identified. Most of them have preceding CMEs and in-situ energetic particle observations show some of them are enhanced in ICME or flare-like material. Motivated by this observation, we discuss here a scenario in which two CMEs erupt in sequence during a short period of time from the same Active Region (AR) with a pseudo-streamer-like pre-eruption magnetic field configuration. The first CME is narrower and slower and the second CME is wider and faster. We show that the magnetic field configuration in our proposed scenario can lead to magnetic reconnection between the open and closed field lines that drape and enclose the first CME and its driven shock. The combined effect of the presence of the first shock and the existence of the open close reconnection is that when the second CME erupts and drives a second shock, one finds both an excess of seed population and an enhanced turbulence level at the front of the second shock than the case of a single CME-driven shock. Therefore, a more efficient particle acceleration will occur. The implications of our proposed scenario are discussed.     

曲面和任意取向表面表面摩阻油膜测量法的进展

本文叙述曲面和任意取向表面表面摩阻测量方法的进一步的发展。介绍用漫射照明获取薄油膜等厚度干涉条纹谱的理论根据和实验结果。讨论了通过油流显示图像的分析,自动探测表面流线方位的可能性。所得结论表明油膜法也能应用于复杂的三维流动。