湿热对单向复合材料层合板Ⅱ型分层特性的影响

利用横向裂纹拉伸试验模型（Transverse Crack Tension-tension Test）,在3种湿热环境（室温、85℃和85℃/95%RH）条件下,对2种单向碳纤维增强树脂基复合材料（T300/QY8911和HTA/6376）层合板的Ⅱ型分层特性进行了试验研究。结果表明湿热环境导致复合材料层间断裂韧性降低,引起Ⅱ型应变能释放率门槛值显着下降,裂纹扩展速率大大提高,温度的影响较湿度更为明显。利用电镜（SEM）对试样分层表面进行了检测,湿度对断面特征无明显的影响。     

Voyager 2 Solar Wind Observations in the Outer Heliosphere

We discuss the solar wind parameters measured in the distant heliosphere from the Voyager 2 spacecraft. Periodic variations in the speed of the wind observed at roughly the solar rotation period may correspond to interaction regions between slower and faster streams of wind. Since the interplanetary magnetic field is enhanced in such regions, they are important for the study of modulation of cosmic rays. Unfortunately, direct observation of the enhanced magnetic field from Voyager 2 has been made difficult by spacecraft-associated noise since 1989.     

The Low Metallicity Tail of the Halo Metallicity Distribution Function

Ongoing spectroscopy and photometry of stars selected in the HK objective-prism/interference-filter survey of Beers and colleagues has resulted in the identification of many hundreds of additional stars in the halo (and possibly the thick disk) of the Galaxy with abundances [Fe/H] -2.0. A new calibration of the technique for estimation of metal abundance based on a CaII K index as a function of broadband B - V color is applied to obtain metallicities for stars observed with the SSO 2.3m and INT 2.5m telescopes. This new data is combined with other samples of extremely metal-deficient stars (Ryan and Norris, 1991a; Beers et al., 1992; Carney et al., 1994) to form a large database of objects of low metallicity. The combined sample is examined and compared with expectations derived from a Simple Model of Galactic chemical evolution. There appears to be a statistically-significant deficit of stars more metal-weak than [Fe/H] = -3.0. An abundance of [Fe/H] -4.0 can be taken as the low-metallicity limit for presently-observable stars in the Galaxy.     

Soho Observations of Density Fluctuations in Coronal Holes

In recent UVCS/SOHO White Light Channel (WLC) observations we found quasi-periodic variations in the polarized brightness (pB) in the polar coronal holes at heliocentric distances of 1.9 to 2.45 solar radii. The motivation for the observation is the 2.5D MHD model of solar wind acceleration by nonlinear waves, that predicts compressive fluctuations in coronal holes. In February 1998 we performed new observations using the UVCS/WLC in the coronal hole and obtained additional data. The new data corroborate our earlier findings with higher statistical significance. The new longer observations show that the power spectrum peaks in the 10–12 minute range. These timescales agree with EIT observations of brightness fluctuations in polar plumes. We performed preliminary LASCO/C2 observations in an effort to further establish the coronal origin of the fluctuations. This revised version was published online in June 2006 with corrections to the Cover Date.     

Radio observations of Venus and the interpretations

The radio observations of Venus are reviewed and compared with theoretical microwave spectra computed for a variety of models of the Venusian environment. The models considered are (a) a CO₂-N₂ atmosphere, (b) an atmosphere of dust (the aeolosphere model), and (c) a cloud model with various loss mechanisms in the cloud. The effect of polarization on the surface emissivity has been included in all the computations. It is shown how the radio observations place limits upon the acceptable models, for example, the density and size of dust particles required in the aeolosphere model. It is shown how some models place severe restrictions on radar observations at short centimeter wavelengths, thereby emphasizing the importance of such experiments. These same models show that the Mariner II observations can not be interpreted in terms of surface phenomena and provide a new interpretation for the microwave phase effect.This work was supported in part by the U.S. Army, Navy and Air Force under Contract DA36-039-AMC-03200(E); and in part by the National Aeronautics and Space Administration (Grants NsG-250-62 and NsG-419).     

A Hybrid Navigation Concept Using a Spinning Satellite?Borne Interferometer and Self?Contained Equipment

This paper analyzes a hybrid navigation concept that uses signals from a radio interferometer mounted on a spinning geostationary satellite, preliminary position estimates from self-contained equipment, and stored a priori information on the past performance of this equipment. The craft-borne processor, optimum in the maximum a posteriori (MAP) sense, is designed to estimate position coordinates using only the incoming radio signals, although improved estimates result if the other two items are available. An error analysis starts with the derivation of an estimation error covariance matrix, whose elements depend on additive receiver noise and the physical parameters of the system. A minimum 1? estimation error in position is obtained by trading off these parameters. The effects of other major error sources, such as tropospheric phase fluctuations, multipath, and craft altitude uncertainty, are added to the estimation error to give a total 1? position error on the order of 3.7 to 5.6 km.     

Space Radiation Damage Measurements in the Earth Synchronous Orbit

For direct measurement of the integrated radiation dose experienced in Earth synchronous orbit, p-i-n diodes were flown as radiation dosimeters on LES-6. The diode, which has a lifetime of 10-4 seconds in the intrinsic region, was originally developed as a neutron dosimeter, but can detect 1-MeV electron fluences as low as 1013 e·cm-2. Observations over three years in orbit are presented.     

Angle-of-Arrival Estimation Using an Adaptive Antenna Array

A direction-finding technique is presented that is capable of simultaneously estimating the arrival angles of multiple signals. Pulsed as well as continuous signals can be handled with the signal form only approximately specified. An adaptive antenna array is used as a processing device in the estimation technique. The effect of input signal and feedback loop parameters upon estimate bias is discussed.