低温液体推进剂充填管路的数值模拟

研究了低温液体推进剂供应管路预冷充填过程的计算方法, 利用一维均相平衡态流体动力学模型和涵盖预冷过程中主要传热工况的传热模型, 考虑了低温液体推进剂的可压缩性, 用有限容积法求解管流方程, 用有限差分法求解管壁内的一维非稳态导热方程.计算了某型低温液体推进剂火箭发动机实验台系统供应管路的预冷充填过程, 分析比较了仿真与实验的结果, 为发动机和实验台系统的改进及新系统的设计提供了依据, 仿真结果及分析结论已应用于现有发动机实验台系统的改造和长距离液氢输送管道的设计中.      

变几何径向透平损失模型及其分析

基于99 mm叶轮实验, 分析了变几何径向透平静叶的各种损失以及不同的损失模型.给出了变几何透平静叶冲角损失的定量分析.通过计算对比不同静叶喉部宽度下叶道边界层摩擦损失, 验证了Glass-man模型在计算叶片流道损失时, 与试验结果是相符的.基于NASA损失模型分析了径向透平静叶的尾缘损失, 损失随着出口边厚度呈线性增加, 减小出口边厚度是减小尾缘损失的有效方法.      

航空发动机涡轮前温度场数据分析方法

在航空发动机整机测试条件下,温度场测试具有局限性。介绍了1种发动机涡轮前温度场测试数据的统计分析方法,该统计方法较为有效;引入模糊原理,对统计量进行了概率分析,使得统计量评估更加完善。     

机内测试虚警分析和控制

现代飞行器广泛采用机内测试(Built-intest,BIT)技术,以便对其内部故障进行自动检测、诊断和隔离,但是常规BIT面临诊断能力不足和诊断模糊性等问题,导致BIT虚警率高,难以有效发挥其应有的作用.本文论述了BIT虚警的基本理论、虚警的危害及现状,并从BIT虚警产生的原因分析入手,提出了解决虚警问题的一些方法和措施.     

基于强度约束的叶片榫头参数化设计

针对榫头的设计要求,介绍了榫头的设计方法和过程.以榫头重量最轻和满足静强度约束为基点,确定榫头的控制参数,实现了人机交互的榫头参数化设计.     

碳纤维增强树脂基复合材料中激光脉冲能量对超声L波的影响

利用不同激光脉冲与碳纤维树脂基复合材料相互作用产生的瞬态热效应激发超声纵波(L波),分析激光脉冲能量对L波的影响.试验结果表明,激励声波的幅度直接与脉冲的能量相关,在高能量区的纵波幅度明显比在低能量区的大,缺陷的存在明显影响L波的存在和幅度.     

Two-Way-Coupling Method for Rapid Aerothermoelastic Analyses of Hypersonic Wings

Several types of coupling methods for resolving aerothermoelastic problems associated with hypersonic wings are summarized,and the appropriate coupling methods for engineering calculations are selected.Then,the calculation and analysis methods for the subdisciplines in this field are introduced,and the time step issue is discussed.A two-way-coupling rapid static aerothermoelastic method for analyzing hypersonic wings is proposed.This method considers thermal effects and is used to conduct an aerothermoelastic response analysis for a hypersonic wing.In addition,the aerodynamic force,heat flux,structural deformation and temperature field are obtained.The following three conclusions are drawn.First,the heating effect has a significant impact on the static aeroelastic response of hypersonic wings;therefore,thermal protection shields are essential.Second,the application of thermal protection shields reduces the differences in the calculation results between the one-and two-way-coupling methods.Third,hypersonic wings exhibit large thermal deformation under high-temperature environments,and in certain cases,the thermal deformation is even larger than the deformation caused by aerodynamic force.     

Modeling and Optimal Design of Planar Linkage Mechanism of Coupled Joint Clearances for Manufacturing

The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.     

航天器视场遮挡分析方法研究

敏感器视场遮挡分析是航天器构型布局设计的重要组成部分,针对大型在轨变构型航天器敏感器视场遮挡分析工作量大、出错率高、遮挡率无法量化等特点,本文提出一种基于敏感器第一视角的视场遮挡快速分析方法。该方法通过设置第一视角图像蒙版及图像映射,模拟方锥形、圆锥形、球形等各类敏感器视场,通过逐个像素比对,计算视场遮挡率和遮挡方位。使用此方法建立了空间站敏感器视场遮挡分析系统,结果表明新方法能够显著提高视场遮挡分析效率和准确率,并且为机构类部件运动过程对敏感器视场遮挡的分析提供了有效工具。     

针对旋翼流场模拟的自适应网格算法

针对基于格心格式求解器的旋翼流场模拟,提出了相应的自适应笛卡尔网格的数据存储结构及自适应算法。给出了相应的单元处理策略,简化了对自适应笛卡尔网格的处理;对于频繁的自适应加密过程中产生的大量重复点,采用了高效的交替数字树算法(Alternating digital tree,ADT)予以删除;对于自适应疏化过程中产生的大量无用点,提出了标记-删除-移动(Mark,delete,move,MDM)算法予以快速地删除,减少了不必要的计算资源消耗。对CaradonnaTung旋翼在不同悬停状态下进行了模拟验证,对比了压力分布系数与桨尖涡位置。之后对HELISHAPE 7A旋翼在前飞情况下进行了模拟验证,计算值与实验值吻合。此外,求解器对桨尖涡的捕捉效果得到了明显的提高,表明本文方法具有良好的有效性与鲁棒性。