Atmospheric response to a Hot SST Event in November 2006 as observed by the AIRS instrument

Using Atmospheric Infrared Sounder (AIRS) products of atmospheric temperature and geopotential height, we investigate the atmospheric response to HE0611, which was found and investigated by [Qin, H., Kawamura, H., Sakaida, F., Ando, K. A case study of the tropical Hot Event in November 2006 (HE0611) using a geostationary meteorological satellite and the TAO/TRITON mooring array. J. Geophys. Res. 113, C08045, doi: 10.1029/2007JC004640, 2008]. HE0611 was formed by connecting two very high SST areas, HE0611-East and HE0611-West. The period-mean atmosphere temperatures at levels of 925 and 850 hPa in HE0611-West are higher, by about 0.5 K, than those in WE0611-East while the atmospheric temperatures at middle to high levels (700–300 hPa) are higher in HE0611-East. The period-mean geopotential heights HE0611-East are much lower than those in HE0611-West for the levels from the surface to 400 hPa. The mean geopotential heights from 400 hPa to 200 hPa are higher in HE0611-East. In the middle and high layers over HE0611-West, the atmosphere temperatures gradually decrease from 7th to 17th, and then increase significantly. The increase in HE0611-East starts from 15th November, which is earlier than that of HE0611-West. The geopotential heights in the high layer of both the areas also show corresponding behaviors. The lagged atmospheric response in the western part is confirmed by the correlation analysis. It emerges that the atmospheric response to HE0611 is well organized and associated with deep convention in HE0611-East and subsidence in HE0611-West. These are also consistent with the HE0611 features and evolution revealed by earlier HE studies.     

Mathematical modeling of heat transfer process in a variable domain

In this paper, a brief review and generalization of studies on the heat transfer and heat conduction problem in a variable domain are presented. The equations of the process, where the boundary displacement velocity is the control, are obtained taking into account heat inflow. This article was submitted by the authors in English.     

大滞后温度智能控制系统的研究与实现

本文研究的是以MCS-51系列单片机为核心的计算机控制系统,用以实现化工催化剂活性检测过程床层温度程序控制。被控对象是具有3～8分钟的纯滞后,时变,非线性特性的催化剂电加热炉。控制难度大。 采用了广义最小方差自校正控制算法,具有时变滞后的极点自校正PID算法,极点对消直接PID三种算法进行了仿真与现场试验研究。前两种,由于工作过程允许的信号对系统激励不够充分,对象在线辩识有困难,试验结果表现,不能实现预期的控制要求。最终采用了极点对消直接PID算法,成功地实现了催化剂活性温度自动控制。该系统工作稳定、可靠,控制精度达到了检测标准要求。     

2K＋1正则图的自由边

本文利用 Tutte 定理,给出并证明了满足一定条件的2k 1正则图中的每个边都是自由边的结论。     

串行程序的并行划分算法及其正确性证明

针对多机系统结构，本文提出了在大粒度级并行划分串行程序的算示。该算法通过识别并行循环任务以及通过确定调用上下文关系识别过程任务，来划分串行程序中的并行成份。该算法是对串行程序实施并行分解的基础。本文还给出了该算法的正确性证明。     

基于EAB资源的交织编译码器的设计与实现

提出了一种新的基于EAB资源交织编译码设计方案，利用FPGA技术实现了数字通信中交织器和解交织器，构建了具体的算法模型，并说明了设计中实际产生的问题及解决方法。     

基于PLIF技术的航空煤油横向射流穿透深度研究

为了研究动量比、韦伯数对射流穿透深度的影响,利用激光诱导荧光(PLIF)技术对航空煤油的穿透特性进行了试验。液态航空煤油通过直径为0.5mm的直射式喷嘴喷射入横向气流,Nd:YAG激光器产生266nm激光用于激发煤油诱导荧光。试验空气压力范围为0.3~0.6MPa,温度358K,动量比范围为10~40,韦伯数范围为170~340。试验结果表明:不同压力下,穿透深度随动量比增加而增加;在本文的工况范围下,韦伯数对射流穿透深度无显著影响。通过对试验数据的分析处理,获得了射流穿透深度关于动量比、韦伯数和轴向距离的经验关系式。     

航空研制项目技术风险评估模型研究

针对航空研制项目技术风险大的特点,从设计与分析、制造、软件开发、试验与评定和使用5个方面出发,构建了航空研制项目技术风险评估模型。该模型可作为航空研制项目转阶段决策参考的辅助工具。     

水系统装置扬程的计算及泵的选型分析

为了提高水系统中水泵的实际运行效率和扬程利用率,降低发动机试验成本,减少能量浪费,以某型发动机台架试验水系统为研究对象,综合考虑了装置静扬程、管路的各种局部损失和沿程损失开展装置扬程的计算。同时根据水系统所需的装置扬程、流量及其变化规律,从泵的参数及其特性曲线入手,进行泵的选型分析,确定合适的泵的类型、台数及连接方式。通过水系统装置扬程的计算和泵的选型分析,结合泵带来的能效利用、工程投入和运行费用等因素,可在满足发动机试验需要的同时实现经济利益最大化,为今后类似水系统工程的设计提供借鉴和指导。     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。