2.5D石英/酚醛复合材料的性能研究

对编织型复合材料－2．5D石英／酚醛复合材料作了初步的研究，采用先进的树脂传递模塑（RTM）工艺进行复合成型，并对其力学性能、热物理性能和烧蚀性能做了研究与分析。研究表明2．5D石英／酚醛复合材料不但具有较好的整体力学性能，而且是一种优良的抗烧蚀、防热材料。     

高速转动壳体行波振动实验研究

本文对轴对称薄壁壳结构的振动特性进行了试验研究。对一圆柱薄壳在静止状态和高速旋转状态下进行了模态试验。试验结果验证了轴对称薄壁壳在转动状态下,由于科氏力的影响,同一模态在转动坐标系中,存在不同频率的前后行波。为理论计算和发生在航空发动机中转动薄壁件振动设计,提供了可靠的试验依据。     

某型涡扇发动机喷口控制系统数控改造方案设计

某型涡扇发动机采用的机械液压控制系统的喷口控制系统质量大、结构复杂、控制性能有限,在加力时产生一系列故障问题。在对原机械液压式喷口控制系统进行分析的基础上,提出对应的数控改造方案,建立仿真模型,并对此喷口数字电子控制系统进行仿真测试。结果表明:数控系统在发动机加力比变动的情况下,可以实现对喷口面积的有效控制,比原机械液压系统具有更好的控制品质,且对于不同的飞行条件也具有一定的适应性。     

航空发动机智能化装配技术体系构建探索

为了研究国内航空发动机装配技术转型及发展趋势,运用离散装配和流程装配生产理念,借鉴国外在飞机和航空发动机装配,采用脉动节拍化生产成功应用经验,针对国内航空发动机装配工艺特点,提出适用于国产航空发动机单元体装配与总装装配,基于智能物流与产线系统深度融合的“多对一或多对多”混合装配新模式的发展思路和实施路线,为保障装配质量和效率,在新装配模式下,构建探索智能化装配的技术体系。     

真实运行状态下叶顶间隙尺寸波动对跨声速转子气动性能的影响研究

为分析跨声速转子实时波动的叶顶间隙尺寸对气动性能的影响,对跨声速压气机转子真实运行状态下一个稳定工况实时波动的叶顶间隙数据进行统计分析,获得了叶顶间隙尺寸的总体水平、波动幅值和概率分布形式。以跨声速压气机转子NASA Rotor 37为研究对象,采用非嵌入式混沌多项式不确定性量化方法,对100%转速下近失速和峰值效率两个工况施加相同叶顶间隙波动对跨声速转子气动性能的影响进行了不确定性量化分析。结果表明,真实运行状态下叶顶间隙波动对气动性能的总体水平无影响,但会缩小喘振裕度3.75%;近失速工况对叶顶间隙波动更为敏感,各参数的相对波动幅值均较峰值效率工况有所增大,等熵效率受叶顶间隙波动的影响比质量流量和总压比大;近失速工况下叶顶间隙波动在叶高方向上的影响范围和强度均大于峰值效率工况,98%叶高位置处静压系数和总压损失系数最大相对波动幅值分别可达14.84%和5%。峰值效率工况下流场中的不确定性主要由叶顶泄漏流及其与激波相互作用引起;而近失速工况下流场当中的不确定性则是由激波和吸力面分离流动起主要作用。     

7YSZ coating prepared by PS-PVD based on heterogeneous nucleation

Plasma spray-physical vapor deposition (PS-PVD) as a novel coating process based on low-pressure plasma spray (LPPS) has been significantly used for thermal barrier coatings (TBCs). A coating can be deposited from liquid splats, nano-sized clusters, and the vapor phase forming different structured coatings, which shows obvious advantages in contrast to conventional technologies like atmospheric plasma spray (APS) and electron beam-physical vapor deposition (EB-PVD). In addition, it can be used to produce thin, dense, and porous ceramic coatings for special applications because of its special characteristics, such as high power, very low pressure, etc. These provide new opportunities to obtain different advanced microstructures, thus to meet the growing requirements of modern functional coatings. In this work, focusing on exploiting the potential of gas-phase deposition from PS-PVD, a series of 7YSZ coating experiments with various process conditions was performed in order to better understand the deposition process in PS-PVD, where coatings were deposited on different substrates including graphite and zirconia. Meanwhile, various substrate temperatures were investigated for the same substrate. As a result, a deposition mechanism of heterogeneous nucleation has been presented showing that surface energy is an important influencing factor for coating structures. Besides, undercooling of the interface between substrate and vapor phase plays an important role in coating structures.     

High-temperature oxidation behavior and analysis of impedance spectroscopy of 7YSZ thermal barrier coating prepared by plasma spray-physical vapor deposition

Quasi-columnar structure 7YSZ(yttria stabilized zirconia) thermal barrier coatings(TBCs) are prepared by plasma spray-physical vapor deposition(PS-PVD) onto pretreated and un-pretreated bond coating, respectively. An isothermal oxidation experiment of 7YSZ TBCs is carried out in the atmosphere of 950 °C in order to simulate the high-temperature oxidation process of engine blades. The isothermal oxidation process of 7YSZ thermal barrier coatings is investigated systematically by impedance spectroscopy. The electrochemical physical model and equivalent circuit of columnar 7YSZ coatings are established. Results show that the isothermal oxidation kinetic curve of columnar 7YSZ thermal barrier coatings appears to follow the parabolic law. A pretreatment of bond coating can reduce the growth rate of the thermally grown oxide(TGO) layer, restraining the initiation and propagation of microcracks between YSZ and TGO layers. The oxidation rate constants of 7YSZ coatings with pretreated and un-pretreated bond coating are 0.101×10~(-12) cm~2·s~(-1) and 0.115 × 10~(-13) cm~2 ·s~(-1), respectively. Impedance analysis shows that the content of oxygen vacancies decreases and the density increases after the TGO layer is oxidized for 150 h. In addition, shrinkage microcracks formed by sintering during the oxidation process is the main reason for an increase of the capacitance and a decrease of the resistance in the grain boundary of YSZ.     

海陆交界非平稳场景星载ScanSAR扇贝效应抑制方法

扫描式合成孔径雷达(ScanSAR)因不受光线、天气影响,能够提供宽测绘带图像而被广泛应用在海洋监测领域。但ScanSAR图像的扇贝效应(Scalloping)和子带拼接效应(Inter-Scan Banding,ISB)严重地降低图像质量,尤其在海陆相接一类的非平稳场景下,干扰更为严重,影响图像的应用效能。针对上述问题,文章给出了一种基于图像分层和卡尔曼滤波的ScanSAR图像扇贝效应和子带拼接效应的抑制方法。针对非平稳场景,先进行图像分层处理使其满足线性卡尔曼滤波需求;然后,利用加性二维周期函数对子图层的扇贝效应和子带拼接效应进行建模;再将卡尔曼滤波器应用于条纹抑制;最后,对真实ScanSAR图像数据的有效处理结果验证了算法的有效性。     

熔融石英半球谐振子亚表面缺陷的湿法刻蚀工艺

为了提高半球谐振子的品质因数,提出采用湿法刻蚀的方法去除半球谐振子亚表面的微缺陷。通过研究熔融石英材料的湿法刻蚀机理,在专用半球谐振子湿法刻蚀设备上能够稳定实现半球谐振子亚微米刻蚀精度,半球谐振子经过湿法刻蚀后表面粗糙度优于100nm,半球谐振子Q值能够提高至2000万以上,半球谐振子频差变化小于0.03Hz。     

BVF诊断在非定常转静匹配中的应用

对一台高负荷跨声速单级风扇进行了非定常数值模拟.并将BVF(boundary vorticity flux, 边界涡量流)诊断方法应用于非定常条件下的转静干涉研究中.结果表明BVF不仅能够清晰地捕捉到转静干涉对流场的影响, 指出转子叶排的尾迹干扰是引发下游叶排通道流场非定常特性的最主要因素, 还能够根据叶片表面出现的一些细节, 结合静压、熵等分析方法, 找出动叶的叶尖和静叶的叶根在转静匹配中存在的问题.表明BVF诊断方法能够反映出转静匹配的状态好坏, 并指出改进设计的方向, 是一种能够有效找出对流场产生负面影响的根源, 并指出削弱甚至消除这些负面影响办法的新型诊断方法.