内埋电阻丝阵列检测复合材料表面裂伤初探

探讨了用层间埋置Ｎｉ－Ｃｒ合金丝构成局部网络实现对复合材料表面损伤位置和损伤程度检测。对表面裂纹尖端附近的应力场分布进行了分析,并将试验结果与预测结果进行了比较。实验结果表明：Ｎｉ－Ｃｒ合金丝阵列可以在玻纤／环氧树脂复合材料中用作传感元件,合金丝阵列所反映的裂端附近应力场分布是合理的。     

PID控制器参数的隶属函数自整定技术及其应用研究

Ｐ Ｉ Ｄ 控制技术在工业过程控制中得到了广泛应用,但传统的 Ｐ Ｉ Ｄ 控制器不具有参数的在线整定功能,当系统工作条件较差时,难以满足控制要求,从而影响了控制品质的进一步提高。本文应用模糊数学中的隶属函数, 以工程施工机械中大量应用的液压阀控油缸为被控对象,建立数学模型和试验系统,实现 Ｐ Ｉ Ｄ 控制器参数的在线自整定。文中对其理论方法、计算机仿真和应用研究进行了论述。     

一个非常规前体机身的流动显示研究

描述了有类似Ｅｒｉｃｋｓｏｎ前体的非常规机身的初步流动显示研究结果,包括测力、表面油流和激光片光流动显示结果和用层流Ｎ－Ｓ方程进行数值模拟的结果。计算和试验的参数范围：α＝０°～５０°,β＝０°～２０°,虽然计算与试验所用的外形在后部有一些不同,但是两者在涡的位置方面显示了良好的一致性。同时研究也表明,大攻角的流动特性可以通过改变机身前体形状进行控制。通过研究还表明,这类前体在改善大攻角横侧方向安定性方面具有很大的潜力。     

LEO卫星发射机功率长期变化分析

针对空间环境辐射效应对低轨(Low Earth Orbit,LEO)卫星固态功放器件的长期影响,以工作超过15年的某卫星发射机为对象,在详细讨论卫星轨道半长轴、倾角、光照角和降交点地方时漂移基础上,分析发射机在轨温度、输出功率等参数变化,重点考察功率长期漂移情况.通过建立模型对功率衰减进行估计,最后结合遥测数据进行检验...     

对相控阵雷达自适应旁瓣对消的多点源压制干扰

分析了相控阵雷达自适应旁瓣对消的工作原理及方法.然后提出了用多台干扰设备协同工作的相参干扰.每台干扰设备在雷达处理间隔内发射能覆盖真实目标并且持续时间较短的干扰信号,多台设备协同工作在目标附近形成压制干扰.该方法影响雷达样本选择,从而降低自适应旁瓣对消的效果.仿真结果和外场试验表明了该方法的有效性.     

一种具有电压支撑功能的改进无功注入策略

电压跌落是输配电系统面临的最严重的问题之一。随着分布式光伏电源在电力系统中的渗透率越来越高,国内外最新标准要求光伏逆变器必须具备低电压穿越能力。为了消除有功功率振荡,在传统的正/负序控制基础上提出了一种改进的有功/无功注入策略;针对现有电压支撑方法缺乏电压抬升范围控制,将三相电压幅值作为控制目标,详细推导了适用于不同电压跌落情况下的数学模型,得出为保证各相电压均保持在安全运行范围之内所需注入无功功率参考值。仿真结果验证了所提策略的正确性和有效性。     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

径向入射激波聚焦实验和数值模拟研究

为得到不同入射激波马赫数对凹腔内径向入射激波聚焦过程的影响,对马赫数为1.25和2.18的径向入射激波在实验段内反射聚焦的过程进行了实验和数值模拟研究。用高速CCD拍摄了凹腔中气流流场的纹影图片,并采用保持强稳定性的龙格—库塔格式、加权基本无振荡算法和块结构动态自适应网格加密对激波反射聚焦的过程进行了数值模拟,实验和数值模拟结果吻合较好。复杂的激波形状及其之间的相互作用(如激波反射,激波聚焦和不同激波的相互作用)在实验和数值模拟中都能很好地观测到。通过比较不同马赫数入射激波的反射聚焦过程,发现较高的马赫数下聚焦后能产生射流,而较低的马赫数下却没有。同时发现,入射激波马赫数能影响二次激波出现的位置和强度,进而影响聚焦过程流场的紊乱程度。     

基于黎曼不变量守恒的轴流压气机反问题设计方法

基于一种全新的轴流压气机叶片反问题设计边界条件,发展了一种全新的三维粘性反问题设计方法。该方法以叶片表面静压分布作为输入的气动性能参数,叶片吸、压力面型线为设计对象。全新的反问题边界条件采用壁面边界处黎曼不变量守恒建立起给定的气动参数分布与叶片几何变化量之间的关系。由于计算过程中叶片几何构型不断发生变化,采用动网格技术对计算网格进行更新。为了验证方法的有效性,采用NASA Rotor 37作为算例,进行叶片返回试验,对叶片表面静压分布进行合理修改,通过反问题设计计算,设计出新的叶片几何构型。计算结果显示,反问题设计很好地满足了给定的叶片表面静压分布,正确地反映了设计意图。改型后的叶片吸力面逆压梯度有所降低,气流分离得到抑制,压气机流量、总压比以及效率分别提高了0.7%,2.2%和1.0%,验证了方法的有效性和正确性。