制导兵器飞行力学研究方向综述

介绍了国外制导兵器的发展概况，主要针对反坦克导弹，制导炮弹，末敏弹药，远程简易制导火箭和制导炸弹。并根据制导兵器发展的需要，提出了制导兵器飞行力学研究领域的一些主要研究方向。     

起落架与防滑刹车系统的相互作用研究

通过采用一个简化的起落架数学模型,对某机在着陆滑跑过程中防滑刹车系统的工作状态进行计算机仿真;并通过改变起落架的结构参数,对起落架与刹车系统在飞机着陆刹车过程中的相互作用进行了初步的定量分析,最后提出了考虑起落架因素的刹车系统半物理仿真试验验证方法。     

基于干扰观测器的新一代歼击机鲁棒飞行逆控制器设计

基于干扰观测器设计了新一代歼击机的鲁棒飞行逆控制器。根据时标分离的原则，将机动飞机分为快慢不同的回路。采用动态逆方法设计了快回路和慢回路控制器，并在慢回路用干扰观测器估计飞机所受的扰动，同时，用于在线补偿动态逆误差。仿真结果表明，该设计合理。     

数控展成电解加工的阴极结构及流场研究

介绍了应用数控展成电解在整体叶轮毛坯上开槽时的流场特点,讨论了阴极结构对加工间隙内流场的影响规律,并相应对阴极的结构设计提出了一些建议。     

Tracking in clutter with nearest neighbor filters: analysis andperformance

The measurement that is “closest” to the predicted target measurement is known as the “nearest neighbor” (NN) measurement in tracking. A common method currently in wide use for tracking in clutter is the so-called NN filter, which uses only the NN measurement as if it were the true one. The purpose of this work is two fold. First, the following theoretical results are derived: the a priori probabilities of all three data association events (updates with correct measurement, with incorrect measurement, and no update), the probability density functions (pdfs) of the NN measurement conditioned on the association events, and the one-step-ahead prediction of the matrix mean square error (MSE) conditioned on the association events. Secondly, a technique for prediction without recourse to expensive Monte Carlo simulations of the performance of tracking in clutter with the NN filter is presented. It can quantify the dynamic process of tracking divergence as well as the steady-state performance. The technique is a new development along the line of the recently developed general approach to the performance prediction of algorithm with both continuous and discrete uncertainties     

一个柔性化MIS系统的设计与开发

本文针对传统ＭＩＳ系统的局限，提出了柔性化ＭＩＳ系统的概念和定义。着重介绍了一个柔性化ＭＩＳ系统ＮＭＳ开发实例，介绍其设计思想和实现该系统柔性化所具备的支撑模块及这些模块的设计要点和功能等，还介绍了该系统的体系结构。在该系统中用户可以灵活地定义或修改数据模式，而且输入、输出、查询、修改、删除和统计等模块均为通用的，不因数据模式或系统功能的修改而变动源程序。源程序的中用户库名和所有条件成分均以参数或     

Ada软件的动态测试技术研究

为改善软件质量，对Ａｄａ软件的动态测试技术进行了研究，并且就以下内容着重进行了讨论；Ａｄａ软件的分析与理解；Ａｄａ软件的动态测试原则与方法；Ａｄａ软件的动态测试工具ＡＳＤＴ。     

一个基于故障树模型的诊断系统

提出一种基于故障树模型的诊断方法，并基于该方法实现了一个验证性的诊断系统。基于故障树的层次诊断模型，提出了确定性推理方法和可能性推理方法及面向故障树的基于框架和广义规则的混合知识表示方法。最后在ＣＯＭ－ＰＡＱ４８６微机上，Ｗｉｎｄｏｗｓ环境下，用ｂｏｒｌａｎｄＣ＋＋实现了该诊断系统，并通过对一个电路系统实验台的诊断验证了方法的有效性。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.