星上控温策略的地面模拟与验证

为充分验证卫星在轨温度控制策略的适用性和效果,针对航天器在轨温度控制的特点及方式,提出一种在地面模拟星上控温策略的方法。该方法包含:设计开发一套适用于航天器真空热试验的星上控温模拟系统及基于比例开关控制算法的星上控温模拟软件;采用并行驱动技术实现单个控温时间片为1 s的时间控制精度,工况稳定后温度控制误差不超过±0.3℃。该方法已成功应用于某型号卫星真空热试验过程,系统配置灵活、操作简单、控温周期短、控温精度高,实现了星上控温策略的有效验证。     

火箭冲压组合动力研究进展

对国内外火箭冲压组合动力(RBCC)研究现状与发展路线进行了总结,阐述了各国主要研究计划和取得的重要成果。系统地总结了西北工业大学航天学院在火箭冲压组合动力的研究进展和研究成果,经过近二十年的发展,完成了从发动机理论分析与原理验证、部件设计与试验到小尺度发动机地面集成验证,初步突破和掌握了宽域全流道设计、宽来流高效燃烧与火焰稳定以及模态过渡等多项关键技术,具备了开展飞行演示验证的基础。     

航空航天用高频高压正弦压力发生器的设计仿真

研制高频高压正弦压力发生器,测试航空航天用压力传感器在高频高压工况下的动态性能是确保发动机优化测试和控制系统有效的关键。为解决现有平面扫掠型正弦压力发生器存在频率和压力受限的问题,提出了一种径向活塞式正弦压力发生器的原理及结构设计,并进一步基于任意拉格朗日欧拉法进行数值仿真,计算其正弦信号在不同压力和不同工作频率下的动静幅值比与失真度,以及优化压力传感器的安装位置。结果表明:设计的径向活塞式正弦压力发生器应确保0.2～8.0 MPa的工作压力和200～10 000 Hz的正弦压力工作频率,正弦压力动静幅值比优于20%,可应用于航空发动机、汽轮机等领域的动态测试。     

基于闭环电流平均值法的永磁同步电机谐波抑制方法

由于逆变器的非线性及永磁同步电机(PMSM)的气隙磁场畸变,在运行过程中PMSM定子电流中含有大量的谐波分量,导致电流波形发生畸变,从而引起较大的转矩脉动。针对传统谐波抑制方法采用低通滤波器(LPF)提取5、7次谐波分量,动态响应时间长,稳态误差大的问题,提出了闭环电流平均值法提取谐波分量。仿真结果表明,闭环电流平均值法可以提高系统的快速性和稳定性。将电流平均值法应用于PMSM谐波抑制系统,仿真结果表明:基于闭环电流平均值法的谐波电压注入法可以降低电流波形的畸变率及5、7次谐波含量。     

Z源NPC三电平变换器恒功率并网控制策略研究

Z源中点钳位式(NPC)三电平变换器把逆变和升压两种环节结合在一起,结构简单、工作效率高,但是针对这种结构输出的无功功率研究较少。提出了一种Z源NPC三电平变换器的恒功率并网控制策略。首先对这种变换器的结构及原理进行分析;再把恒功率控制引入到这种变换器的并网控制中,并采用空间矢量脉宽调制(SVPWM)实现了变换器的并网控制。MATLAB/Simulink软件仿真结果证明了这种变换器能够提高电压升压比。该控制策略可使变换器输出的有功功率、无功功率稳定于设定值,且并网电流谐波较低。     

Thermoelastohydrodynamic analysis of misaligned bearings with texture on journal surface under high-speed and heavy-load conditions

Hydrodynamic journal bearings are used to support the planetary gears in the transmission system of a Geared Turbo Fan engine, and they operate under severe working conditions, such as misalignment, high speed, and heavy load. Surface texture is regarded as an effective approach to improve mechanical properties under severe working conditions. However, the effects of surface texture on misaligned journal bearings under severe conditions have not been well studied. Therefore, a thermoelastohydrodynamic(TEHD) lubricating model with a textured and misaligned journal is presented in this study. Solid deformation, heat transfer between oil and the bearing, and heat convection between air and the bearing are considered in the model. The effects of cavitation and viscosity-temperature are also taken into account. The impacts of surface texture parameters and the misalignment angle on lubricating properties are investigated in the model. Results indicate that the bearing lubricating performance is greatly improved by optimal surface texture considering journal misalignment. The maximum oil film pressure and load-carrying capacity of a journal bearing increase with journal misalignment. Meanwhile, the oil film temperature increases sharply while considering misalignment.     

Aircraft engine fault detection based on grouped convolutional denoising autoencoders

Many existing aircraft engine fault detection methods are highly dependent on performance deviation data that are provided by the original equipment manufacturer. To improve the independent engine fault detection ability, Aircraft Communications Addressing and Reporting System (ACARS) data can be used. However, owing to the characteristics of high dimension, complex correlations between parameters, and large noise content, it is difficult for existing methods to detect faults effectively by using ACARS data. To solve this problem, a novel engine fault detection method based on original ACARS data is proposed. First, inspired by computer vision methods, all variables were divided into separated groups according to their correlations. Then, an improved convolutional denoising autoencoder was used to extract the features of each group. Finally, all of the extracted features were fused to form feature vectors. Thereby, fault samples could be identified based on these feature vectors. Experiments were conducted to validate the effectiveness and efficiency of our method and other competing methods by considering real ACARS data as the data source. The results reveal the good performance of our method with regard to comprehensive fault detection and robustness. Additionally, the computational and time costs of our method are shown to be relatively low.     

封严篦齿特征参数对其密封性能影响的数值分析

利用软件CFX对直通型篦齿的内部流动进行模拟,研究了直通型篦齿齿距、转速对其泄漏量的影响.计算结果表明:篦齿泄漏量随齿距的增大而减少,篦齿转速对篦齿泄漏量的影响很小.另外,本文提出一种变齿距直通型篦齿,研究变齿距对篦齿泄漏量的影响,并对变齿距齿形所处位置对泄漏量的影响进行研究.     

热塑性复合材料原位成型工艺及关键技术

介绍了原位成型工艺及其两项关键技术的研究与发展过程,根据原位成型技术应用于航天领域的典型型号,提出了原位成型工艺两项关键技术的指标,并对原位成型工艺未来的发展进行了展望。     

碳纳米管薄膜电热特性及其除冰性能

采用碳纳米管薄膜(CNTF)作为电加热元件,研究碳纳米管薄膜对玻璃纤维增强树脂基复合材料结构表面的除冰性能,同时研究其电热性能。SEM14μm左右。XRD表明CNTF样品为微晶结构,结晶度差且含有少量杂质。空气环境通电,升温速率和最高恒定温度随输入电压增大而迅速提高。输入电压为5 V温度95℃。在四次电热循环后,其表面电阻略有升高,均值从2.795Ω到3.870Ω。在9 V输入电压下,CNTF被迅速烧断,CNTF样品电流承载极限在1.8 A左右。利用其焦耳热性能进行除冰,质量为20 g冰块在树脂基玻璃纤维复合材料样品的表面脱落时间为240 s。表明CNTF在飞机除冰领域具有潜在应用价值。