高性能的标准单元库设计

从仿真和流片两个方面对标准单元库的验证方法进行了研究.在仿真方面,提出了采用静态时序分析工具和SPICE仿真工具对单元的估算值和仿真结果进行比较分析的方法来验证,同时还给出了具体的操作步骤实例.在流片验证中,提出了一种非常有效的电路结构.这种电路结构不但能够准确验证时序,还能极大地减少PAD数量;最重要的特点是:该电路能够完全避免PAD和非被测单元的引入带来的额外延迟,从而得到准确的被测单元延迟.     

数字闭环光纤陀螺的调制串扰误差

 通过分析数字闭环光纤陀螺的阶梯波调制信号与输出死区、周期噪声干扰及小角速度漂移的关系,提出了调制串扰误差的概念。指出调制信号与探测器输出信号之间的电交叉耦合及调制信号产生的调制误差是产生调制串扰误差的干扰源。将调制串扰通道模型简化为比例环节和部分积分环节,并和光纤陀螺理想模型结合,建立了光纤陀螺调制串扰误差模型,利用该模型推导出了产生死区的条件及周期噪声干扰和小角速度漂移造成的输出偏差表达式,并对周期噪声的幅值、频率与陀螺输出量级、带宽之间的关系进行了定量分析。调制串扰误差的仿真和实验结果与理论分析结果基本一致,验证了调制串扰误差模型的正确性。     

基于牛顿欧拉法的3-RPS并联机构逆动力学分析

 以3-RPS机构为例,研究了对称少自由度并联机构的逆动力学问题。因其自由度数目小于6,该类机构的支链不仅传递驱动力,同时还需为动平台提供约束。然而,现有文献大多未对广义约束力给予足够的重视。采用牛顿欧拉法建立了3-RPS机构的刚体动力学方程,给定动平台的运动规律及外载荷后,可一并求解机构所需的驱动力与约束力矩。算例仿真表明,与动平台自由速度方向不一致的外载荷主要需由约束力矩平衡。因此,在对称少自由度并联机构动力学设计中,必须计入广义约束力的影响。     

Space–Time Structure of Energetic Electron Precipitations according to the Data of Balloon Observations and Polar Satellite Measurements on February 1–6, 2015

Cosmic Research - The results of an analysis of the space–time characteristics and dynamics of precipitations of magnetospheric electrons with energies in the range from 0.1 to 0.7 MeV are...     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

China's Space Activities In 2007

THE FOURTH BEIDOU NAVIGATION EXPERIMENTAL SATELLITE LAUNCHED The fourth Beidou experimental navigation satellite was launched into snace aton a LM-3A launch vehicle at Xichang Satellite Launch Center on February 3 at 00:28(Beijing Time).24 minutes later,the satellite separated from the launch vehicle and     

Debut Flight Of LM-3C:Launching Tianlian-1 Successfully

FY-3A,the first satellite of China's new generation of polar-orbiting meteorological satellites,was launched into space atop a modified LM-4C launch vehicle.The satellite separated from the rocket 19 minutes after the takeoff.Flying at an altitude of 807km with an inclination of 98.8 degrees,the satellite circles in polar orbit 14 times everyday,covering the whole globe twice a day. FY-3A has a design lifetime of three years.Weighing 2295kg,the three-axis stabilized satellite is equipped with 11 remote s...     

太阳电池阵枪式微型电阻焊接系统设计与分析

太阳电池阵枪式微型电阻焊接系统,采用电阻点焊的方法,辅以自动化操作,控制系统设有机器视觉监控可实时监控焊接情况。焊后对焊点进行金相分析,焊点界面结合紧密,无局部未焊合或虚焊、微裂纹、孔洞等明显缺陷,焊点综合性能佳。该焊接系统的研制对实现太阳电池阵的高效自动化组装和焊接,提高太阳电池阵焊点的承载能力、极端温度下的力学性能、可靠性、导电性等具有重要意义。     

The mass loss of spacecraft polyimide films under the action of atomic oxygen and vacuum ultraviolet radiation

The threshold values of the annual fluence of atomic oxygen (F _AO ≈ 10²⁰ cm^?2), as well as the ratios of the energy-flux density of vacuum ultraviolet radiation of the solar spectrum to the flux density of atomic oxygen (Φ _ν /Φ _AO ≈ 8 × 10^?15 mJ) were determined, which are characterized the influence of the synergistic effect on the mass loss of Kapton-H, PM-A, and PM-1E polyimide films, which are spacecraft materials.