磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。     

基于因子模糊化BP神经网络的磨损颗粒识别

在引入了一套磨粒形态学描述子来提取磨损颗粒的显微形态特征的基础上 ,采用人工神经网络技术 ,编制了用于磨损颗粒自动识别的 BP网络计算机模拟程序。在网络训练的过程中应用了本文引入的因子模糊化训练方法 ,使训练速度大大加快 ,以异或问题为例 ,速度可提高 5～ 1 0倍。应用此网络对磨粒测试库进行识别实验 ,识别正确率在 90 %以上 ,并且识别速度很快 ,大大优于传统的磨粒识别方法。     

数字地形数据的二维三次卷积插值

由于数字地形数据库是以网格的形式给出网格点上的地形高度信息，在低空突防轨迹优化过程中，往往需要非网格蹼地形的高度信息和地形曲面的导数，这些都是离散的地形数据库所无法提供的。对二维的地形数据进行插值是解决问题的有效手段。本文提出一种二维离散数据的插值方法－－二维三次卷积插值。该插值函数是地形曲面的三次逼近，具有连续的三阶导数，可以非常好地满足低空突防轨迹优化的需要。仿真结果表明，它具有比双线性插值和     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

大客车局部优化造型对其使用性能的影响

随着车速的提高,汽车在行驶中受到的空气阻力便成为不可忽视的问题,因此与减阻节能相关的汽车优化造型也就显得越来越重要了。由于运动物体所受到的空气阻力系数的大小主要取决于它的头部的形状,因而我们对厢式大客车驾驶室前风窗区的几种不同造型在低速风洞中进行了测力的实验研究。实验结果表明,驾驶室前围不同形式的过渡是影响厢式客车空气阻力的重要因素。其中在适当的风窗倾角下,经过良好的圆化处理后,可使厢式大客车的空气阻力减小27%左右。这不仅节省了燃料的消耗,还可以提高汽车的最大行驶速度,改善其加速和爬坡能力。     

An Ideal Digital Frequency Translator

Many digital techniques are available for providing a desired shift in frequency of a given carrier signal, but the resulting output usually contains spurious harmonic content due to the digital means employed. This correspondence discusses a digital device which provides a variable shift in frequency of a given carrier signal, with the feature that no spurious harmonic content exists in the output.     

An Experimental Radar Facility

A coherent CW superheterodyne radar system operating at frequencies of 9, 17, 35, and 70 GHz is described. The radars are installed on a free-flight range to study backscattering from wakes of hypersonic-velocity projectiles. Each radar is equipped with a focused-lens antenna oriented at an angle of approximately 45° to the flight axis. Amplitude and phase of the received signal are recorded separately. Some typical results are given to demonstrate the capabilities of the equipment.     

Time-Optimal Control of a Bounded Phase-Coordinate Process II: High-Order Systems with Multiple Control Inputs

This paper considers the problem arising from the design of an autopilot for a large booster. The motion-controlling actuators of the booster have both position and rate limits. The problem is formulated as a bounded phase-coordinate problem and analyzed by the ``backing out of the target' procedure. A method of constructing the optimal control is presented. An example of an oscillatory system with two control inputs is given, and the optimal control is expressed as an explicit time function.     

Estimated Flight Time for Optimum Trajectories

Various methods are presented for estimating the flight time for vehicles which fly an optimum trajectory. A realistic example is considered in order to display the inherent accuracy of each of these methods. Numerical integration methods are found to be the most accurate. Simple formulas are derived for the case where a less accurate estimate is acceptable. All of these methods require less computation than would be required in order to solve the overall optimization problem. Thus any one of these methods can be applied to an onboard guidance scheme or control system which requires a real time estimate of the time-to-go.