星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

基于四路信号处理的载波锁相环

载波跟踪环是独立导航接收机中最为脆弱的部分,在一定载噪比下,影响载波跟踪环跟踪门限的主要因素是动态应力。科斯塔斯锁相环是最常用的载波跟踪环之一,由于频率牵引范围的限制,其对动态应力非常敏感,该频率牵引范围由最大相位牵引范围决定。传统科斯塔斯锁相环是基于两路信号处理进行载波相位锁定的,其相位牵入范围仅为［-π/2,π/2］。文章提出了一种基于四路信号处理的科斯塔斯锁相环,增加的两路信号分别与原来两路相位相差π/4,其相位牵入范围可以达到［-3π/4,3π/4］,较传统方式提高了1/2。仿真结果显示文中提出的设计方法能够明显提高环路的动态性能     

测量时刻偏差对单星定轨误差的影响分析

为评估测量时刻偏差对单星定轨等效测量误差的影响,根据单星定轨处理策略分析了其理论模型,指出测站接收机的测量时刻偏差由测站时钟钟差以及测量时刻不准确度等组成。试验数据分析表明,测站钟差经一阶多项式拟合后的残差可近似为零均值的测量噪声;数值仿真结果表明,卫星信号发射时刻1ms误差导致GEO、IGSO、MEO三种卫星的等效测距误差分别为006cm、40cm、80cm。     

月球精确软着陆最优标称轨迹在轨制导方法

为实现在月球表面期望的着陆点进行精确软着陆（PPL）,且满足燃耗最优性要求,基于提出的LIDAR目标点在轨自主选定的月球精确软着陆方案,对月球PPL最优标称轨迹在轨快速规划制导方法进行研究。首先针对月球PPL三维球体非线性轨道动力学模型,采用Legendre Gauss Lobatto伪光谱方法将轨迹优化的最优控制问题转化为非线性规划问题（NLP）,再利用SQP优化算法求解月球PPL最优标称轨迹,最后通过遗传算法对优化结果进行验证,并提出应用遗传算法提供SQP在轨规划初值数据库的方案。仿真结果表明了最优标称轨迹在轨规划方法的快速性和有效性。     

具有广泛适用性的AOS虚拟信道调度算法

针对现有的基于虚拟信道紧迫度的动态调度算法的不足,提出了一种新的高级在轨系统虚拟信道动态调度算法。该算法首先估算虚拟信道的紧迫度和数据帧的紧迫度,然后用加权系数将二者结合起来构造成一个全新的虚拟信道传送紧迫度函数,再根据该函数的值进行判决调度。对于高级在轨系统中不同速率、不同性质、不同类型的星上数据源,该算法均可通过选择合适的加权系数灵活地分配传输时隙,保证各用户合理、动态地占用物理信道,满足对数据的传输时延要求,因此具有广泛的适用性。理论分析和仿真结果表明,本文提出的算法比基于虚拟信道紧迫度的动态调度算法具有更好的性能     

负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

In situ analysis of Europa ices by short-range melting probes

A key aspect for understanding the astrobiological potential of planets and moons in the Solar system is the analysis of material embedded in or underneath icy layers on the surface. In particular in case of the icy crust of Jupiters moon Europa such investigation would be of greatest interest. For a Europa lander to be launched in the 2020–2030 timeframe, we propose to use a simplified instrumented melting probe which is able to access and sample depths of a few meters without the necessity of heavy and complicated drilling equipment.     

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Spatial variation of the supersonic thermal plasma flow downstream of the termination shock

In this paper we start from the most recently observed fact that the solar wind plasma after passage over the termination shock is still supersonic with a Mach number of about 2. To explain this unexpected phenomenon and to predict the evolution of properties of the downstream plasma flow we here consider a two-fluid proton plasma with pick-up protons as a separate suprathermal, second proton fluid. We then formulate a self-consistent system of hydrodynamical conservation equations coupling the two fluids by dynamical and thermodynamical coupling terms and taking into account the effects of newly incorporated protons due to charge exchange with the H-atoms in the heliosheath. This then allows us to predict that in the most probable case the solar wind protons will become subsonic over a distance of about 30 AU downstream of the shock. As we can also show, it may, however, happen that the plasma mixture later again reconverts to a supersonic signature and has to undergo a second shock before meeting the heliopause.     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.