Marangoni heat pipe: An experiment on board MIOsat Italian microsatellite

This article summarizes the activities in preparation of a microgravity experiment to be carried out by using a small technological payload onboard a microsatellite developed by the Italian Space Agency. A dedicated hardware will be developed to investigate innovative heat pipes filled with self-rewetting fluids, i.e. dilute aqueous alcoholic solutions with unique surface tension properties. After a general introduction of the scientific background, the paper is focused on the main activities in preparation of the flight experiment, on the design of the flight hardware and on the experimental planned procedure. The laboratory results achieved on ground in preparation of a flight experiment are also presented, including measurements of fluids physical properties and preliminary heat pipes performances characterization test. From the engineering point of view, the activities dealing with heat pipes filling and sealing are included. The activities for heat pipe characterization conclude the paper.     

Pseudo-automatic characterization of the morphological and kinematical properties of coronal mass ejections using a texture-based technique

The white light coronagraphs onboard SOHO (LASCO-C2 and -C3) and most recently STEREO (SECCHI -COR1 and -COR2) have detected a myriad of coronal mass ejections (CME). They are a key component of space weather and under certain conditions they can become geo-effective, hence the importance of their kinematic characterization to help predict their effects. However, there is still a lot of debate on how to define the event boundaries for space weather purposes, which in turn makes it difficult to agree on their kinematic properties. That lack of agreement is reflected in both the manual and automated CME catalogs in existence. To contribute to a more objective definition and characterization of white-light coronagraph events, Goussies et al. (2010) introduced recently the concept of “texture of the event”. Based on that property, they developed a supervised segmentation algorithm to allow the automatic tracking of dynamic events observed in the coronagraphs field of view, which is called CORonal SEgmentation Technique (CORSET). In this work, we have enhanced the capabilities of the algorithm by adding several new functionalities, namely the automatic computation of different morphological and kinematic parameters. We tested its performance on 57 well-studied limb CME events observed with the LASCO coronagraphs between 1997 and 2001, and compared the parameters obtained with those from three existent CME lists: two of them obtained from an observer-based detection and tracking method (i.e., two manual catalogs), and the other one based on the automated detection and characterization of the CME events (i.e., a fully automated catalog). We found that 51 events could be tracked and quantified in agreement with the CME definition. In general terms, the position angle, and the radial and expansion speeds are in agreement with the manual catalogs used for comparison. On the other hand, some discrepancies between CORSET and the automated catalog were found, which can be explained by the different delimitation of the CME angular extent.     

Self-propagating high-temperature reactions for the fabrication of Lunar and Martian physical assets

The development of a new process potentially useful for future manned Lunar and/or Martian space missions in the framework of the so-called ISRU (In-Situ Resource Utilization) and ISFR (In-Situ Fabrication and Repair) concepts is described and discussed in this work. This process involves the fabrication of physical assets by self-propagating high temperature synthesis (SHS) for construction applications in Lunar and Martian environments starting from different Lunar or Martian regolith simulants and aluminum, as reducing agent. In addition, although Moon and Mars already contain ilmenite (FeTiO₃) and iron oxides, respectively, the latter ones are also added to the initial mixtures to promote suitable SHS reactions. A complete scheme for the fabrication of physical assets to be used as protection against solar rays, solar wind and meteoroids, where all required stages are indicated, is finally proposed in the framework of a recently filed patent.     

Statistical analysis of the total electron content observed at 23°S in the Brazilian sector

The vertical total electron content (VTEC) time series obtained at São José dos Campos (23.2°S, 45.9°W), Brazil, were statistically analyzed to study the low latitude ionosphere in the Brazilian sector during the year of 2006 (a period of low solar activity). Statistical analysis showed that Probability Density Functions (PDFs) and kurtosis have an intermittent behavior on small-scales (periods from minutes to one day) and presence of two functions on large-scales (periods from 3 to 30 days). The skewness result suggests the presence of some kind of waves due to the action of tropospheric sources (lower atmospheric origin). Results obtained by wavelet transform show strong oscillations with scale-sizes between 3 and 30 days, possibly associated with the planetary oscillations. According to these statistical and wavelet analyses we conjecture that there exist two important factors regarding the ionospheric effects: one factor is due to turbulent states found in small scales and the other factor consists in a more or less deterministic state provided by planetary waves (3–16 days or full solar rotation (27–28 days)). Further, these strong oscillations were also noted in multifractal analysis. We found a decrease of multifractality degree of the same scale-sizes.     

Optimal Earth’s reentry disposal of the Galileo constellation

Nowadays there is international consensus that space activities must be managed to minimize debris generation and risk. The paper presents a method for the end-of-life (EoL) disposal of spacecraft in Medium Earth Orbit (MEO). The problem is formulated as a multiobjective optimisation one, which is solved with an evolutionary algorithm. An impulsive manoeuvre is optimised to reenter the spacecraft in Earth’s atmosphere within 100?years. Pareto optimal solutions are obtained using the manoeuvre $\mathrm{\Delta }v$ and the time-to-reentry as objective functions to be minimised. To explore at the best the search space a semi-analytical orbit propagator, which can propagate an orbit for 100?years in few seconds, is adopted. An in-depth analysis of the results is carried out to understand the conditions leading to a fast reentry with minimum propellant. For this aim a new way of representing the disposal solutions is introduced. With a single 2D plot we are able to fully describe the time evolution of all the relevant orbital parameters as well as identify the conditions that enables the eccentricity build-up. The EoL disposal of the Galileo constellation is used as test case.     

Control of Lunar and Martian dust--experimental insights from artificial and natural cyanobacterial and algal crusts in the desert of Inner Mongolia, China

Studies on the colonization of environmentally extreme ground surfaces were conducted in a Mars-like desert area of Inner Mongolia, People's Republic of China, with microalgae and cyanobacteria. We collected and mass-cultured cyanobacterial strains from these regions and investigated their ability to form desert crusts artificially. These crusts had the capacity to resist sand wind erosion after just 15 days of growth. Similar to the surface of some Chinese deserts, the surface of Mars is characterized by a layer of fine dust, which will challenge future human exploration activities, particularly in confined spaces that will include greenhouses and habitats. We discuss the use of such crusts for the local control of desert sands in enclosed spaces on Mars. These experiments suggest innovative new directions in the applied use of microbe-mineral interactions to advance the human exploration and settlement of space.     

Effects observed in the equatorial and low latitude ionospheric F-region in the Brazilian sector during low solar activity geomagnetic storms and comparison with the COSMIC measurements

The main objective of the present investigation has been to compare the ionospheric parameters (NmF2 and hmF2) observed by two ground-based ionospheric sounders (one at PALMAS- located near the magnetic equator and the other at Sao Jose dos Campos-located in the low-latitude region) in the Brazilian sector with that by the satellite FORMOSAT-3/COSMIC radio occultation (RO) measurements during two geomagnetic storms which occurred in December 2006 and July 2009. It should be pointed out that in spite of increasing the latitude (to 10°) and longitude (to 20°) around the stations; we had very few common observations. It has been observed that both the peak electron density (NmF2) and peak height (hmF2) observed by two different techniques (space-borne COSMIC and ground-based ionosondes) during both the geomagnetic storm events compares fairly well (with high correlation coefficients) at the two stations in the Brazilian sector. It should be pointed out that due to equatorial spread F (ESF) in the first storm (December 2006) and no-reflections from the ionosphere during nighttime in the second storm (July 2009), we had virtually daytime data from the two ionosondes.     

Seasonal and solar cycle dependence of F3-layer near the southern crest of the equatorial ionospheric anomaly

The occurrence of an additional F3-layer has been reported at Brazilian, Indian and Asian sectors by several investigators. In this paper, we report for the first time the seasonal variations of F3-layer carried out near the southern crest of the equatorial ionospheric anomaly (EIA) at São José dos Campos (23.2°S, 45.0°W; dip latitude 17.6°S – Brazil) as a function of solar cycle. The period from September 2000 to August 2001 is used as representative of high solar activity (HSA) and the period from January 2006 to December 2006 as representative of low solar activity (LSA). This investigation shows that during HSA there is a maximum occurrence of F3-layer during summer time and a minimum during winter time. However, during LSA, there is no seasonal variation in the F3-layer occurrence. Also, the frequency of occurrence of the F3-layer during HSA is 11 times more than during LSA.     

Deep and Shallow Solid-Earth Structures Reconstructed with Sequential Integrated Inversion (SII) of Seismic and Gravity Data

In this paper, the possibility of using simultaneously seismic and gravity data, for the reconstruction of solid-Earth structures, has been investigated through the use of an algorithm which allows joint efficient and reliable optimisation of compressional velocity and mass density parameters. We view the measured data as a realisation of a stochastic process generated by the physical parameters to be sought and we construct a “probability density function” which includes three kinds of information: information derived from gravity measurements; information derived from seismic travel time inversion and information on the physical correlation among density and velocity parameters. We show that combining data has a beneficial effect on the inversion since: it makes the problem more stable and as a consequence, providing that the quality of data is sufficiently high, enables more accurate and reliable reconstruction of the unknown parameters. In this context, we look forward the GOCE mission, which promises high spatial resolution (100–200 km) and accurate (1–2 mGals) gravity data. We show results obtained from data sets calculated for a lateral inhomogeneous earth synthetic model and from seismic and gravity field data analysed: — in the framework of TOMOVES (TOMOgraphy of Mt. VESuvius) experiment, an European project aiming at reconstructing the 3-D image of Mt. Vesuvius volcano and the crust underneath. using high resolution seismic tomography techniques and other geophysical methods; — for a profile inserted in a project aiming at reconstructing the crustal structure between Corsica and the Northern Appennines which crosses the Ligurian Sea and cuts the Ligurian Appennines W of La Spezia, extending up to Parma. This revised version was published online in August 2006 with corrections to the Cover Date.