Synergistic use of multitemporal RAMP,ICESat and GPS to construct an accurate DEM of the Larsemann Hills region,Antarctica

An enhanced digital elevation model (DEM) of the Larsemann Hills region, east Antarctica, is constructed synergistically by using highly accurate ground-based GPS measurements, satellite-derived laser altimetry (GLAS/ICESat) and Radarsat Antarctic Mapping Project (RAMPv2) DEM-based point elevation dataset. Our DEM has a vertical accuracy of about 1.5 times better than RAMPv2 DEM and seven times better than GLAS/ICESAT-based DEM. The accuracy is improved by validating the RAMPv2 DEM elevation by supplementing with GLAS/ICESat and DGPS survey data, when compared to that of DEM constructed by using GLAS/ICESat or RAMPv2 alone. With the use of accurate GPS data as ground control points reference elevations, the DEM extracted is much more accurate with least mean RMSE of 34.5 m than that constructed by using a combination of GLAS/ICESat and RAMPv2 as true reference. The newly constructed DEM 7 achieves highest accuracy with the least average elevation difference of 0.27 m calculated using 46 ground reference points. Available DEMs of Antarctic region generated by using radar altimetry and the Antarctic Digital Database indicate elevation variations in the range of 50–100 m, which necessitates the generation of local DEM and its validation by using ground truth. This is our first attempt of fusing multi-temporal, multi-sensor and multi-source elevation data to generate a DEM of any part of Antarctica, in order to address the ice elevation change to infer the ice mass balance. Our approach focuses on the strengths of each elevation data source to produce an accurate DEM.     

GPS monitoring of vertical seafloor motion at Platform Harvest

We describe results from two decades of monitoring vertical seafloor motion at the Harvest oil platform, NASA’s prime verification site for the TOPEX/Poseidon and Jason series of reference altimeter missions. Using continuous GPS observations, we refine estimates of the platform subsidence—due most likely to fluid withdrawal linked to oil production—and describe the impact on estimates of stability for the altimeter measurement systems. The cumulative seafloor subsidence over 20 yrs is approximately 10 cm, but the rate does not appear constant. The apparent non-linear nature of the vertical motion, coupled with long-period GPS errors, implies that the quality of the seafloor motion estimates is not uniform over the 20-yr period. For the Jason-1 era (2002–2009), competing estimates for the subsidence show agreement to better than 1 mm yr⁻¹. Longer durations of data are needed before the seafloor motion estimates for the Jason-2 era (2008–present) can approach this level of accuracy.     

The high-LET radiation component measured during the EUROMIR-94 mission.

Stacks of CR-39 plastic nuclear track detectors were mounted inside the MIR-station during the EUROMIR-94-mission. We present LET-spectra determined separately for long range cosmic ray heavy ions and for short range target fragments produced in nuclear interactions of cosmic rays and measured charge distributions for relativistic and stopping particles.     

Utilization of CAM,CAF, MAX,and FAX for space radiation analyses using HZETRN

To estimate astronaut health risk due to space radiation, one must have the ability to calculate various exposure-related quantities that are averaged over specific organs and tissue types. Such calculations require computational models of the ambient space radiation environment, particle transport, nuclear and atomic physics, and the human body. While significant efforts have been made to verify, validate, and quantify the uncertainties associated with many of these models and tools, relatively little work has focused on the uncertainties associated with the representation and utilization of the human phantoms. In this study, we first examine the anatomical properties of the Computerized Anatomical Man (CAM), Computerized Anatomical Female (CAF), Male Adult voXel (MAX), and Female Adult voXel (FAX) models by comparing the masses of various model tissues used to calculate effective dose to the reference values specified by the International Commission on Radiological Protection (ICRP). The MAX and FAX tissue masses are found to be in good agreement with the reference data, while major discrepancies are found between the CAM and CAF tissue masses and the reference data for almost all of the effective dose tissues. We next examine the distribution of target points used with the deterministic transport code HZETRN (High charge (Z) and Energy TRaNsport) to compute mass averaged exposure quantities. A numerical algorithm is presented and used to generate multiple point distributions of varying fidelity for many of the effective dose tissues identified in CAM, CAF, MAX, and FAX. The point distributions are used to compute mass averaged dose equivalent values under both a galactic cosmic ray (GCR) and solar particle event (SPE) environment impinging isotropically on three spherical aluminum shells with areal densities of 0.4 g/cm², 2.0 g/cm², and 10.0 g/cm². The dose equivalent values are examined to identify a recommended set of target points for each of the tissues and to further assess the differences between CAM, CAF, MAX, and FAX. It is concluded that the previously published CAM and CAF point distributions were significantly under-sampled and that the set of point distributions presented here should be adequate for future studies involving CAM, CAF, MAX, or FAX. It is also found that the errors associated with the mass and location of certain tissues in CAM and CAF have a significant impact on the mass averaged dose equivalent values, and it is concluded that MAX and FAX are more accurate than CAM and CAF for space radiation analyses.     

PHITS simulations of the Matroshka experiment

The radiation environment in space is very different from the one encountered on Earth. In addition to the sparsely ionizing radiation, there are particles of different Z with energies ranging from keV up to hundreds of GeV which can cause severe damage to both electronics and humans. It is therefore important to understand the interactions of these highly ionizing particles with different materials such as the hull of space vehicles, human organs and electronics. We have used the Particle and Heavy-Ion Transport code System (PHITS), which is a three-dimensional Monte Carlo code able to calculate interactions and transport of particles and heavy ions with energies up to 100 GeV/nucleon in most matter. PHITS is developed and maintained by a collaboration between RIST (Research Organization for Information Science & Technology), JAEA (Japan Atomic Energy Agency), KEK (High Energy Accelerator Research Organization), Japan and Chalmers University of Technology, Sweden. For the purpose of examining the applicability of PHITS to the shielding design we have simulated the ESA facility Matroshka (MTR) designed and lead by the German Aerospace Center (DLR). Preliminary results are presented and discussed in this paper.     

Feasibility of developing an ionospheric E-region electron density storm model using TIMED/SABER measurements

We present a new technique for improving ionospheric models of nighttime E-region electron densities under geomagnetic storm conditions using TIMED/SABER measurements of broadband 4.3 μm limb radiance. The response of E-region electron densities to geomagnetic activity is characterized by SABER-derived NO⁺(v) 4.3 μm Volume Emission Rates (VER). A storm-time E-region electron density correction factor is defined as the ratio of storm-enhanced NO⁺(v) VER to a quiet-time climatological average NO⁺(v) VER, which will be fit to a geomagnetic activity index in a future work. The purpose of this paper is to demonstrate the feasibility of our technique in two ways. One, we compare storm-to-quiet ratios of SABER-derived NO⁺(v) VER with storm-to-quiet ratios of electron densities measured by Incoherent Scatter Radar. Two, we demonstrate that NO⁺(v) VER can be parameterized by widely available geomagnetic activity indices. The storm-time correction derived from NO⁺(v) VER is applicable at high-latitudes.     

Shear flow energy redistribution stipulated by the internal-gravity wavy structures in the dissipative ionosphere

The linear mechanism of generation, intensification and further nonlinear dynamics of internal gravity waves (IGW) in stably stratified dissipative ionosphere with non-uniform zonal wind (shear flow) is studied. In case of the shear flows the operators of linear problem are non-selfadjoint, and the corresponding Eigen functions – nonorthogonal. Thus, canonical – modal approach is of less use studying such motions. Non-modal mathematical analysis becomes more adequate for such problems. On the basis of non-modal approach, the equations of dynamics and the energy transfer of IGW disturbances in the ionosphere with a shear flow is obtained. Exact analytical solutions of the linear as well as the nonlinear dynamic equations of the problem are built. The increment of shear instability of IGW is defined. It is revealed that the transient amplification of IGW disturbances due time does not flow exponentially, but in algebraic – power law manner. The effectiveness of the linear amplification mechanism of IGW at interaction with non-uniform zonal wind is analyzed. It is shown that at initial linear stage of evolution IGW effectively temporarily draws energy from the shear flow significantly increasing (by an order of magnitude) own amplitude and energy. With amplitude growth the nonlinear mechanism turns on and the process ends with self-organization of nonlinear solitary, strongly localized IGW vortex structures (the monopole vortex, the transverse vortex chain or the longitudinal vortex street). Accumulation of these vortices in the ionospheric medium can create the strongly turbulent state.     

A Problem of choosing an optimal number of information unmanned aerial vehicles

Using formalism of the queueing theory, we propose two-objective models for optimizing the number of unmanned aerial vehicles (UAV) designed for remote monitoring (reconnaissance) of certain regions. A model that takes into account the UAV failure in performing a flight mission is considered. The numerical method and examples of solving problems stated are presented.     

Numerical modeling of RadioAstron SRT temperature deformations

The results of modeling the thermal deformations of a space radio telescope’s reflecting surface are presented in the paper. Calculations were performed for the versions of the most unfavorable telescope illumination by the Sun.