航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

遥测快速处理系统的设计与实现

阐述实现遥测快速处理系统的必要性,介绍系统的组成、数据库的设置、数据预处理、数据分路和计算、数据打印绘图等各部分的功能。最后总结快速处理的优点和不足,提出遥测数据处理的新方式     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

International cooperation in space — new opportunities, new approaches : An assessment

Now that the Cold War is over, the authors of this Viewpoint believe that in the interests of the USA as well as the rest of the world international cooperation should become a more fundamental element of US space policy. Cooperative agreements will not always be easy to reach and will require creative statecraft. To that end the USA should take the initiative in establishing a high-level international policy forum to facilitate discussions on the main goals and objectives to be served by international cooperation in space.     

试论规范高校内部审计责任

本文结合高校内部审计工作实际，论述了规范高校内部审计责任的现实意义。指出规范高校内部审计责任的内涵及其存在的问题。提出了加强规范高校内部审计责任的几项措施。     

捷联惯导系统中陀螺的初始测漂

本文介绍捷联惯导系统中多个陀螺初始常值漂移的测定和补偿。所谓“常值漂移”是指固定不变的漂移和一部分在各次启动时都不相同的并随时间缓慢变化的“随机常值”。本文采用“双位置(测漂)法”可以测出两个角速度陀螺沿载体系X_b,y_b和z_b测量轴的常值漂移。经过仿真证明,这一方法是完全可行的。     

飞船的双冲量最优交会

本文利用作者在文献中所介绍的Clohessy—Wiltshire方法,在线性引力模型的假设下,求得了实现双冲量交会的最优解析解,即实现交会所需施加的两次冲量之和最小。数字仿真表明,本分析是正确的。