Superlight rotating reflectors in space

There is a general possibility of creation in space of large controlled mirror reflectors for solar and electromagnetic radiation with specific mass order of 1 g m^?2 or less. Such reflectors may be used in space energetics for concentration of solar energy for its further conversion into microwave beam and transmission to the Earth. They can also be used to illuminate the Earth surface in a dark period with reflected sunlight, to control the weather, for research work and some other purposes. Such reflector is a good solar sail. The control of its orientation and position in space is performed using solar energy and light pressure without spending fuel delivered from the Earth. Its form is maintained by centrifugal forces and light pressure. The film strength permits concentrators with radii of several kilometres and nearly flat reflectors for lighting applications with radii of hundreds of metres. Large series of identical reflectors can be built in space using superthin film tape at assembly station. For a year more than a hundred reflectors with a diameter of 600 m can be assembled at such a station. The assembly station can be placed at the height of 1000 km. The reflectors transfer to synchronous or other orbit is performed using their sail-likeness. For realization of such reflectors one should solve a very difficult problem of superthin film mass production as well as assembly technology problems. Careful study and experimental checks of their lifetime should be also made.     

Airglow atmospheric imager on board the ‘IK-Bulgaria-1300’ satellite

This paper shows the possibilities of the optical scanning imager for investigation of the structure of the auroral, SAR and tropical arcs and in this way to study the particle precipitation, neutral winds across the magnetic equator, drifts, electric fields and the current systems in the ionosphere.     

The variability of stratospheric nitrogen compounds observed by LIMS in the winter of 1978–1979

The LIMS experiment was launched on the Nimbus 7 satellite for the purpose of sounding the vertical structure of temperature and key upper atmosphere trace gases on a global scale. The technique of thermal infrared limb sounding was used to obtain measurements of O₃, H₂O, NO₂, and HNO₃. LIMS collected data almost continuously from late October to late May over the latitude range from 64°S to 84°N. Two of the gases, NO₂ and HNO₃, are important elements in the NO_x chain of chemical reactions leading to ozone destruction. We will describe results for these gases in terms of zonal mean profiles and latitudinal distributions. The period selected for study is January–May 1979, when a major stratospheric warming occurred.     

Magnetic energy storage and conversion in the solar atmosphere

A review of the theoretical problems associated with preflare magnetic energy storage and conversion is presented. The review consists of three parts; preflare magnetic energy storage, magnetic energy conversion mechanisms, and preflare triggers. In Section 2, the relationship between magnetic energy storage and the electrodynamic coupling of the solar atmosphere is developed. By accounting for the electrodynamic coupling of the solar atmosphere, we are able to examine the fundamental problems associated with the concept of in situ versus remote magnetic-energy storage. Furthermore, this approach permits us to distinguish between the roles of local and global parameters in the storage process.Section 3 is focused on the conversion mechanisms that can explain, in principle, the rapid energy release of a flare. In addition, we discuss how electrodynamic coupling eventually dictates which mechanism(s) is responsible for releasing the stored magnetic energy, and how the global coupling dictates the final evolution of the relevant mechanism. Section 4 examines preflare triggers and Section 5, we examine the most promising directions for future research into the problem of magnetic-energy storage and conversion of the Sun.     

Leaky Coaxial Cable Resource Protection Sensor Performance Analysis

The performance of an RF intrusion detection system which uses a leaky coaxial cable sensor is analyzed. A simple cable sensor field model is assumed which gives good agreement between the computed response and observation. Expressions that describe the performance of several deployment configurations and receiver types are developed. The probability of detection and the zone of containment are computed and their uniformity is examined as a function of cable propagation constants.     

Stability of Gyro in a Vehicle Spinning with Uncertain Angular Velocity

The analysis of a single-axis rate gyroscope mounted in a vehicle which is spinning with uncertain angular velocity about the spin axis of the gyro is presented. The nonlinearity in the equation of motion of the gimbal is retained. Using circle criterion, it is shown that the gimbal motion is globally asymptotically stable if Nyquist plot of the linear transfer function of the gyro lies in the interior of a certain disk. A simple analytical relation for the selection of gyro parameters for stability is derived.     

Large-Signal Transient Responses of a Switching Regulator

Analytical and experimental considerations of the large-signal transient responses of the buck-type switching regulator are described. The dynamic behavior under the large-signal condition is different from the small-signal operation because of the saturation characteristics of the pulsewidth modulator feedback controller. The effect of this nonlinearity is analyzed by dividing its operation into three modes. As a result the peak values of the inrush current and output voltage are obtained analytically both for the start-up and for the step change of the load condition.     

Calculating Detection Probabilities for Systems Employing Noncoherent Integration

Cumulative probability distributions that occur in radar and sonar detection problems are calculated directly from the characteristic function by using a Fourier series. The error in the result is controlled by two parameters which can be adjusted to suit the application. The technique is applied to the problem of determining the detection performance of consecutive discrete Fourier transforms (DFTs) for a narrowband Gaussian signal with a rectangular spectrum. Since the characteristic function is used directly in its product form this technique does not suffer from the numerical problems associated with the partial fraction approach. The technique can handle many different problems in a single computational structure making it a valuable tool in system performance studies.