Comparison of two measurement fusion methods forKalman-filter-based multisensor data fusion

Currently there exist two commonly used measurement fusion methods for Kalman-filter-based multisensor data fusion. The first (Method I) simply merges the multisensor data through the observation vector of the Kalman filter, whereas the second (Method II) combines the multisensor data based on a minimum-mean-square-error criterion. This paper, based on an analysis of the fused state estimate covariances of the two measurement fusion methods, shows that the two measurement fusion methods are functionally equivalent if the sensors used for data fusion, with different and independent noise characteristics, have identical measurement matrices. Also presented are simulation results on state estimation using the two measurement fusion methods, followed by the analysis of the computational advantages of each method     

气固紊流剪切流中颗粒弥散的拉格朗日模拟

本文提出了一种对于气固两相紊流剪切流中圆形固体颗粒弥散的拉格朗日拟计算方法，其中考虑了颗粒间的磁撞对流体相和颗料相的影响，应用该方法对一气固紊流剪切流场进行了模拟计算，并对有、无颗粒间磁撞情况下的模拟计算结果与Lavieville用大涡模拟方法的研究结果进行了比较，并进行了讨论。     

NEPE推进剂的热分解(Ⅰ)粘合剂的热分解

利用快速热裂解原位反应池（气体原位反应池）／快速扫描傅里叶变换红外光谱（RSFT－IR）和固体原位反应池／RSFT－IR联用装置，实时测定了NEPE推进剂粘合剂气相及凝聚相热裂解产物，研究获得了在线性升温条件下NEPE推进剂粘合剂的热分解特征，并讨论了其热分解机理。     

金属间化合物TiAl(W,Si)合金的蠕变行为和机制

 研究了 Ti-47Al-2 W-0.5 Si合金在 650～ 750℃区间的蠕变行为和变形机制。结果表明,合金 650℃蠕变寿命与施加应力之间符合线性的双对数关系,可用表达式 lg^t_f=10 lg^R+30来描述。蠕变寿命与最小蠕变速率之间满足 Monkman-Grant关系的修正式。合金的比蠕变强度与抗热腐蚀镍基高温合金 K438G相当。在700℃变载荷下蠕变时具有与恒载荷下蠕变相类似的特征。 800℃长期时效粗化合金组织,降低蠕变寿命。位错滑移和形变孪生是合金蠕变的主要变形机制。     

航空发动机用金属橡胶隔振器动静态性能的研究

以某型号航空发动机阻尼减振需求为背景,对开发研制的金属橡胶隔振器与现用的橡胶隔振器进行了动、静态实验研究。研究结果表明:金属橡胶隔振器的能量耗散性能、静态承载能力、过临界的能力及提供振动防护的区域都远远大于橡胶隔振器,而且通过改变金属橡胶隔振器的结构参数和预压缩量可以优化其隔振效果。研究结果为利用金属橡胶隔振器来改善航空发动机的振动状况提供了依据。     

Streamer Evaporation

Streamer evaporation is the consequence of heating in ideal MHD models because plasma is weakly contained by the magnetic field. Heating causes inflation, opening of field lines, and release of solar wind. It was discovered in simulations and, due to the absence of loss mechanisms, the ultimate end point is the complete evaporation of the streamer. Of course streamers do not behave in this way because of losses by thermal conduction and radiation. Heating is also expected to depend on ambient conditions. We use a global MHD model with thermal conduction to examine the effect of changing the heating scale height. We also extend an analytic model of streamers developed by Pneuman (1968) to show that steady streamers are unable to contain plasma for temperatures near the cusp greater than ∼ 2 × 10⁶ K. This revised version was published online in June 2006 with corrections to the Cover Date.     

UVCS Observations and Modeling of Streamers

We present results derived from the analysis of an equatorial streamer structure as observed by the UVCS instrument aboard SOHO. From observations of the H I Lyα and Lyβ lines we infer the density and temperature of the plasma. We develop a preliminary axisymmetric, magnetostatic model of the corona which includes the effects of gas pressure gradients on the magnetic structure. We infer a coronal plasma β > 1 in the closed field regions and near the cusp of the streamer. We add to the model a parallel velocity field assuming mass flux conservation along magnetic flux tubes. We then compute the Lyα emissivity and the line-of-sight integrals to obtain images of Lyα intensity, taking into account projection effects and Doppler dimming. The images we obtain from this preliminary model are in good general agreement with the UVCS observations, both qualitatively and quantitatively. This revised version was published online in June 2006 with corrections to the Cover Date.     

一种求解D-S诊断识别框架方法

利用D-S证据理论进行故障诊断时,首先需准确地确定出诊断识别框架,这是D-S故障诊断的先决条件.在导弹武器等复杂系统中,存在着故障原因与故障征兆之间关联关系不确定的现象,增加了求取诊断识别框架的困难.为此,提出了一种求取复杂系统的D-S诊断识别框架方法.首先,基于基本诊断模型,给出了诊断贝叶斯网络模型.以及求解诊断贝叶斯网络模型的方法;然后,给出了征兆集合等概念以及求解故障识别框架的方法;最后,通过示例验证了方法的正确性.     

The Electric Antennas for the STEREO/WAVES Experiment

The STEREO/WAVES experiment is designed to measure the electric component of radio emission from interplanetary radio bursts and in situ plasma waves and fluctuations in the solar wind. Interplanetary radio bursts are generated from electron beams at interplanetary shocks and solar flares and are observed from near the Sun to 1 AU, corresponding to frequencies of approximately 16 MHz to 10 kHz. In situ plasma waves occur in a range of wavelengths larger than the Debye length in the solar wind plasma λ _D ≈10 m and appear Doppler-shifted into the frequency regime down to a fraction of a Hertz. These phenomena are measured by STEREO/WAVES with a set of three orthogonal electric monopole antennas. This paper describes the electrical and mechanical design of the antenna system and discusses efforts to model the antenna pattern and response and methods for in-flight calibration.