金属零件的一种快速成型制造方法

金属零件的快速制造是快速成型技术的最终目标之一,也是当今快速成型领域的一大研究热点。本文在介绍快速成型技术的一个重要分支－选区激光烧结的基础上,提出了一种基于小功率激光快速成型系统的金属零件成型工艺。这种方法首先烧结金属与有机粘结剂的混合粉末,生成“绿件”,而后除粘、熔渗金属,最终得到致密的金属件。最后,文中给出了加工实例,并对这种工艺的影响因素进行了详细的分析与讨论。     

基于聚束照射SAR成像算法的条带SAR数据处理

为实现聚束照射合成孔径雷达（SAR）与条带模式SAR成像算法上的统一，本文利用两种模式之间的内在联系，将条带模式SAR数据分块处理，等效成聚束模式数据。然后，用聚束照射SAR成像算法实现条带数据的成像处理。针对具体数据，文中还对成像区大小的选择作了分析，并推导出成像长度与滤波器带宽应当满足的关系式。包场数据的处理严格证实了理论分析并验证了本文运用的方法。     

飞机穿越微下击暴流风切变的智能控制

在应用模糊逻辑建模与辨识方法建立微下击暴流风切变模型的基础上，根据恒定俯仰姿态改出微下击暴流的飞行引导策略，提出了一种改出微下击暴流风切变的模糊反馈控制系统，并将遗传算法应用于该模糊逻辑控制器的设计。结果表明，本文提出的建模方法能够更真实地反映出飞机穿越微下击暴流风场的动态特性；采用模糊逻辑控制器，可使得飞机在穿越微下击暴流风场时具有较好的改出性能；另外，遗传算法的应用对已设计的模糊逻辑控制器进行了优化，进一步改善了飞机穿越微下击暴流的性能。     

基于批生产的逐段式车间作业调度算法

探讨了离散作业型（Job shop）车间中的作业调度的分阶段模型，并根据离散作业调度的阶段性提出了基于作业状态空间的逐段式车间作业调度算法，通过对一个实际车间作业调度仿真比较，此算法运算速度比最短加工时间（SPT）和最少工作量剩余（LWR）算法快，其调度结果在实际作业车间具有可执行性。     

一种新颖组合变换器拓扑研究与应用

基于电源模块并联和串联的思想，提出了一种新颖双管正激组合变换器拓扑，克服了双管正激变换器副边二极管电压应力过高，输出电压和电流脉动大，只能应用于输出中低压场合的缺点，具有副边二极管电压应力低，可靠性高，原边开关管电流应力低，输出电压和电流脉动小，磁芯元件体积小等优点，本文对该新颖组合变换器进行分析，仿真和实验，表明适合应用于输入中，高电压，输出高压，大电流场合，并成功应用于某型飞机6KVA逆变器前级变换器，各项技术指标均符合设计要求。     

快速可重构信息系统的框架研究(英文)

变化和重构是快速可重构信息系统 (RRIS)的两个核心概念 ,RRIS对变化的适应或演化能力使它优于传统信息系统。本文首先提出 RRIS的体系结构 ,然后以 RRIS框架为重点 ,讨论框架的定义、分类及设计 ,研究框架的构成、构成元素 (业务构件 )的设计及构件如何在构架的组织下协调地安插在 CORBA的软总线上 ,实现类似硬件IC的即插即用。构件在框架上即插即用的灵活机制及热点构件 (反映变化 )的灵活运用 ,提高了框架的可扩展性、可定制性 ,从而提高了 RRIS适应变化的可重构性。     

继续投资航空维修业?

航空维修业正处在发展的十字路口.一些航空公司将其维修业务剥离出去以增加现金流,独立的航空维修企业正在进行调整以应对不断改变的市场环境,更多的维修企业则在寻求新的投资和合作伙伴.     

Characteristics of Icy Surfaces

The surfaces of the Solar System’s icy satellites show an extraordinary variety of morphological features, which bear witness to exchange processes between the surface and subsurface. In this paper we review the characteristics of surface features on the moons of Jupiter, Saturn, Uranus and Neptune. Using data from spacecraft missions, we discuss the detailed morphology, size, and topography of cryovolcanic, tectonic, aeolian, fluvial, and impact features of both large moons and smaller satellites.     

Implications of X-ray Observations for Electron Acceleration and Propagation in Solar Flares

High-energy X-rays and ??-rays from solar flares were discovered just over fifty years ago. Since that time, the standard for the interpretation of spatially integrated flare X-ray spectra at energies above several tens of keV has been the collisional thick-target model. After the launch of the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in early 2002, X-ray spectra and images have been of sufficient quality to allow a greater focus on the energetic electrons responsible for the X-ray emission, including their origin and their interactions with the flare plasma and magnetic field. The result has been new insights into the flaring process, as well as more quantitative models for both electron acceleration and propagation, and for the flare environment with which the electrons interact. In this article we review our current understanding of electron acceleration, energy loss, and propagation in flares. Implications of these new results for the collisional thick-target model, for general flare models, and for future flare studies are discussed.     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.