Algebraic operations on graphs with using numeric coding for simulating the systems of rocket and space technology

The paper adduces the relators for algebraic operations on graphs using the numeric codes of the graphs. The special algebra of codes has been devised with consideration of the principles of graph transformation. This paper demonstrates the relevance of numeric coding of graphs for solving the problems of enumeration, systematization, and compact representation of the information about the structural and functional characteristics of the systems of flow distribution and conversion of rocket and space technology and for conducting the modeling transformations of given systems in the course of the structural and functional studies as well.     

Method of designing a neural controller for the automatic lateral control of unmanned aerial vehicles

The paper discusses a method of designing the neural controller for two-channel control of a technical object by an example of the roll and yaw control depending on deviations, velocities and accelerations of their variation.     

The adjustment of the mathematical model accuracy of the gas-hydraulic flight control actuator power circuit of an aircraft

The methodology is proposed and the mathematical model is developed for the purpose of numerical simulation of the power circuit of the gas-hydraulic actuator with displacing power source for the gimbaled nozzle control. It provides the highest power efficiency factor of the actuator as a part of aircraft by means of pulling together the profiles of available and required power.     

High-Energy Electron Beam Relaxation in a Stationary Plasma Thruster

In the paper, processes of high-energy electron beam interaction with plasma particles in a discharge channel of a stationary plasma thruster are analyzed and the results are presented.     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

Leg venous hemodynamics and leg volumes during a 42 day -6 degrees head-down bedrest

Seven healthy subjects were submitted to a 42-day head down bedrest, where leg venous compliance (venous distensibity index VDI) and leg volumes were assessed by mercury strain gauge plethysmography with venous occlusion and optoelectronic plethysmography, respectively. Plethysmographic and volometric measurements were made, before, during (at days 1, 4, 7, 14, 21, 26, 34 and 41), and after bedrest (days 1, 4, 7, 11 and 30 of the recovery period). Results showed a continuous decrease in leg volumes throughout bedrest, when VDI increased until day 26 of bedrest, and then decreased afterwards. The recovery period was characterized by a rapid return of VDI to prebedrest levels while leg volumes progressively normalised. These results showed that leg venous compliance changes are not always dependant upon skeletal muscle changes, and that factors other than size of muscle compartment are able to determine increases in leg venous compliance during long-term bedrest.     

Localization performance of arrays subject to phase errors

The passive localisation of radiating sources using an array subject to random perturbations in sensor phases is presented. All source signals as well as additive noises observed at the sensors are assumed to be independent identically distributed zero-mean Gaussian random processes. Cramer-Rao bounds are derived for source bearings and ranges for the phase errors at each sensor. It is shown that accurate phase calibration can be achieved when the number of sources exceeds a certain minimum. The locations of the calibrating sources need not be known a priori and need only satisfy mild regularity conditions. A calibration procedure is proposed which uses maximum-likelihood techniques     

Real-time translational control of a MEMS comb resonator

Closed-loop control has been successfully applied to a microelectromechanical systems (MEMS) lateral comb resonator device in real-time to perform impulse disturbance damping and sinusoidal position control, enabled by the use of a through-wafer optical microprobe to obtain position feedback. This result leverages the application of lifetime, in-situ control of MEMS in order to provide quality assurance of microsystems in safety critical applications. A position feedback signal produced by a through-wafer optical microprobe has been used for comb resonator system model identification by two independent methods to accurately determine the effective mass, damping, and spring constant values of the device. After accurate determination of system parameters, closed-loop impulse disturbance damping and proportional-integral-differential (PID) translational control were applied. Closed-loop control results presented indicate controllability of such microstructures and response times on the order of the natural frequency of the device.     

Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

The Cassini Visual And Infrared Mapping Spectrometer (Vims) Investigation

The Cassini visual and infrared mapping spectrometer (VIMS) investigation is a multidisciplinary study of the Saturnian system. Visual and near-infrared imaging spectroscopy and high-speed spectrophotometry are the observational techniques. The scope of the investigation includes the rings, the surfaces of the icy satellites and Titan, and the atmospheres of Saturn and Titan. In this paper, we will elucidate the major scientific and measurement goals of the investigation, the major characteristics of the Cassini VIMS instrument, the instrument calibration, and operation, and the results of the recent Cassini flybys of Venus and the Earth–Moon system.This revised version was published online in July 2005 with a corrected cover date.