Alternative statements of optimal load-bearing structure design problems

We analyze the well-known statements of optimal design problems for load-bearing maximum rigidity structures in which a principle of the minimum of total potential energy of structure deformation is used. A version of the generalized statement of optimization problems for processes described by linear equations with a symmetric operator is proposed. On the basis of the version outlined, we present a mathematical algorithm for obtaining beam structures of maximum rigidity, in which the finite element method is used to solve an analytical problem. We give the numerical results of solving two problems of optimal design of maximum rigidity structures that are simulated by cantilever and statically indeterminate beams.     

The coronal dynamics imagers for the KuaFu mission

The Space Weather Explorer – KuaFu mission will provide simultaneous, long-term, and synoptic observations of the complete chain of disturbances from the solar atmosphere to the geospace. KuaFu-A (located at the L1 liberation point) includes Coronal Dynamics Imagers composed of a Lyman-α coronagraph (from 1.15 to 2.7 solar radii) and a white light coronagraph (out to 15 solar radii), in order to identify the initial sources of Coronal Mass Ejections (CMEs) and their acceleration profiles. The difficulty of observing the lower corona should not be underestimated since instrumental stray light remains a critical issue in the visible because of the low contrast of the corona with respect to the Sun. Observing the corona in the Lyman-α line is a valid alternative to white light observations. This approach takes advantage of both the intrinsic higher contrast of the corona with respect to the solar disk in this line compared to the visible, and the absence of F-corona at 121.6 nm. Furthermore, it has been convincingly shown that the coronal structures seen in Lyman-α correspond to those seen in the visible and which result from Thomson scattering of the coronal ionized gas. This is because the plasma is still collisional in the lower corona so that the hydrogen neutral atoms are coupled to the protons. A classical, all-reflecting internally-occulted Lyot coronagraph is required so as to preserve the image quality down to the inner limit of the field-of-view. A narrow band interference filter located in a collimated beam allows isolating the Lyman-α line. The visible coronagraph will adopt the approach of a single instrument having a large field-of-view extending from 2.5 to 15 solar radii. Such a design is based on refractive externally-occulted coronagraphs built for recent past missions, essentially the LASCO-C2 and C3 instruments and the SECCHI/COR 2 of the STEREO mission, which is itself a combination of the C2 and C3 instruments.     

Optimization of the ship's navigation and controlling system with results of sea trials

This paper considers the state-of-the-art information technologies applied to solve the automatic track-keeping problem of the ship on a preset system of straight tacks and on a preset route to the area of hydrographic survey. A navigation-and-controlling system aboard a hydrographic vessel GS-439 was used to provide the fulfillment of the task. The results of the sea trials of control problems are given. They have shown rather good accuracy of the ship track-keeping on a preset system of straight tacks and on a preset route as well as the efficiency of automatic ship passing to the first tack and passing over to the next tacks in surveying the seabed relief, using a multi-channel echo sounder     

Intermediate-term periodicities in relativistic solar electron fluences during solar cycles 22 and 23

In this paper, we have investigated the intermediate-term periodicities of the relativistic (E > 10 MeV) solar electron flares measured by IMP-8 satellite of NASA for the time period of 1986–2001. This period of investigation includes the entire solar cycle 22; ascending, maximum and a part of descending phase of the current solar cycle 23. To determine accurately the occurrence rate of electron flux, we have employed three different spectral decomposition techniques, viz. fast Fourier transformation (FFT); maximum entropy method (MEM) and Lomb–Scargle periodogram analysis method. For solar cycle 22, in the low frequency range, power spectrum analysis exhibits statistically significant periodicities at ∼706, ∼504 and ∼392 days. In the intermediate frequency range, we have found a series of significant periodicities ∼294, ∼221, ∼153, ∼86, ∼73 and ∼66 days. For short term, periodicities of ∼21–23, ∼31 and ∼37 days were found in power spectrum. When solar cycle 23 is considered the significant periodicities are ∼20, ∼23, ∼29, ∼39, ∼54, ∼63, ∼118, ∼133 and ∼154 days. These results provide evidence that the best known Rieger period (∼153 days), appeared in the high energetic electron flux data for cycle 22 and also likely during maxima of cycle 23. The existence of these periodicities has been discussed in the light of earlier results.     

Diagnosing the Neutral Interstellar Gas Flow at 1 AU with IBEX-Lo

Every year in fall and spring the Interstellar Boundary Explorer (IBEX) will observe directly the interstellar gas flow at 1 AU over periods of several months. The IBEX-Lo sensor employs a powerful triple time-of-flight mass spectrometer. It can distinguish and image the O and He flow distributions in the northern fall and spring, making use of sensor viewing perpendicular to the Sun-pointing spin axis. To effectively image the narrow flow distributions IBEX-Lo has a high angular resolution quadrant in its collimator. This quadrant is employed selectively for the interstellar gas flow viewing in the spring by electrostatically shutting off the remainder of the aperture. The operational scenarios, the expected data, and the necessary modeling to extract the interstellar parameters and the conditions in the heliospheric boundary are described. The combination of two key interstellar species will facilitate a direct comparison of the pristine interstellar flow, represented by He, which has not been altered in the heliospheric boundary region, with a flow that is processed in the outer heliosheath, represented by O. The O flow distribution consists of a depleted pristine component and decelerated and heated neutrals. Extracting the latter so-called secondary component of interstellar neutrals will provide quantitative constraints for several important parameters of the heliosheath interaction in current global heliospheric models. Finding the fraction and width of the secondary component yields an independent value for the global filtration factor of species, such as O and H. Thus far filtration can only be inferred, barring observations in the local interstellar cloud proper. The direction of the secondary component will provide independent information on the interstellar magnetic field strength and orientation, which has been inferred from SOHO SWAN Ly-α backscattering observations and the two Voyager crossings of the termination shock.     

Difficulties in the study of cosmic radio noise absorption at 30 MHz using riometer at low latitude station,Kolhapur (Lat-16.8°N,Long-74.25°E)

A dual dipole antenna has been installed at low latitude station Kolhapur (Geographic 16.8°N, 74.25°E), Maharashtra, India for the study of cosmic radio noise absorption using Solid State Riometer (which operates at 30 MHz) during pre phase of 24th solar maxima. The aim for this type of study over Kolhapur was to know the response of lower (D region) ionosphere over low latitude by cosmic radio noise absorption using riometer technique during quite period as well as sudden ionospheric disturbances (SID). The observations are being taken for 3 years. Two different sites (∼40 km away from each other) were used for the installation of riometer equipment assuming minimum local noise. It is found that solar noise to cosmic radio noise hence resulting in signal saturation. The night time signal is relatively free of interference but sometimes local noise is responsible for spike-like signatures. Hence it is concluded that Kolhapur (a low latitude station) is not suitable for the study of cosmic radio noise absorption on 30 MHz with riometer and dual dipole antenna. Proper choice for operating frequency of riometer and antenna gain is suggested for low latitude use of this technique for ionospheric deviative and nondeviative absorption studies.     

The ionosphere and the Latin America VLF Network Mexico (LAVNet-Mex) station

In order to detect and study the ionospheric response to solar flares (transient high energy solar radiation), we have constructed a radio receiver station at Mexico City, which is part of the “Latin American Very low frequency Network” (LAVNet-Mex). This station extends to the northern hemisphere the so called “South American VLF Network”.     

Langley method applied in study of aerosol optical depth in the Brazilian semiarid region using 500, 670 and 870 nm bands for sun photometer calibration

Due to the high costs of commercial monitoring instruments, a portable sun photometer was developed at INPE/CRN laboratories, operating in four bands, with two bands in the visible spectrum and two in near infrared. The instrument calibration process is performed by applying the classical Langley method. Application of the Langley’s methodology requires a site with high optical stability during the measurements, which is usually found in high altitudes. However, far from being an ideal site, Harrison et al. (1994) report success with applying the Langley method to some data for a site in Boulder, Colorado. Recently, Liu et al. (2011) show that low elevation sites, far away from urban and industrial centers can provide a stable optical depth, similar to high altitudes. In this study we investigated the feasibility of applying the methodology in the semiarid region of northeastern Brazil, far away from pollution areas with low altitudes, for sun photometer calibration. We investigated optical depth stability using two periods of measurements in the year during dry season in austral summer. The first one was in December when the native vegetation naturally dries, losing all its leaves and the second one was in September in the middle of the dry season when the vegetation is still with leaves. The data were distributed during four days in December 2012 and four days in September 2013 totaling eleven half days of collections between mornings and afternoons and by means of fitted line to the data V₀ values were found. Despite the high correlation between the collected data and the fitted line, the study showed a variation between the values of V₀ greater than allowed for sun photometer calibration. The lowest V₀ variation reached in this experiment with values lower than 3% for the bands 500, 670 and 870 nm are displayed in tables. The results indicate that the site needs to be better characterized with studies in more favorable periods, soon after the rainy season.     

Development of in-situ Space Debris Detector

Due to high relative velocities, collisions of spacecraft in orbit with Space Debris (SD) or Micrometeoroids (MM) can lead to payload degradation, anomalies as well as failures in spacecraft operation, or even loss of mission. Flux models and impact risk assessment tools, such as MASTER (Meteoroid and Space Debris Terrestrial Environment Reference) or ORDEM (Orbital Debris Engineering Model), and ESABASE2 or BUMPER II are used to analyse mission risk associated with these hazards. Validation of flux models is based on measured data. Currently, as most of the SD and MM objects are too small (millimeter down to micron sized) for ground-based observations (e.g. radar, optical), the only available data for model validation is based upon retrieved hardware investigations e.g. Long Duration Exposure Facility (LDEF), Hubble Space Telescope (HST), European Retrievable Carrier (EURECA). Since existing data sets are insufficient, further in-situ experimental investigation of the SD and MM populations are required. This paper provides an overview and assessment of existing and planned SD and MM impact detectors. The detection area of the described detectors is too small to adequately provide the missing data sets. Therefore an innovative detection concept is proposed that utilises existing spacecraft components for detection purposes. In general, solar panels of a spacecraft provide a large area that can be utilised for in-situ impact detection. By using this method on several spacecraft in different orbits the detection area can be increased significantly and allow the detection of SD and MM objects with diameters as low as 100 μm. The design of the detector is based on damage equations from HST and EURECA solar panels. An extensive investigation of those panels was performed by ESA and is summarized within this paper. Furthermore, an estimate of the expected sensitivity of the patented detector concept as well as examples for its implementation into large and small spacecraft are presented.