Binary Signal Detection with Decision and Information Feedbacks

This paper analyzes a sequential feedback detection scheme derived by Kramer's nonsequential intermittent one; in addition to the noiseless information feedback channel, it makes use of a noiseless decision feedback channel. Expressions for the normalized average evergy per symbol, average decision time, probability of error, and average power are derived. The comparison with the nonsequential intermittent scheme shows that the proposed one allows an appreciable gain in transmission rate and requires a smaller peak-to-average power ratio.     

Exploring the Detached-Eddy Simulation for Main Rotor Flows

This paper applies the Detached-Eddy Simulation (DES) method to resolve a larger part of the flow spectrum around rotor blades in hover and forward flight. A comparison between DES and Unsteady Reynolds–Averaged Navier–Stokes simulation was carried out for the case of a forward flying rotor suggesting that DES has great potential for rotor applications.     

Optimization of observer trajectories for bearings-only targetlocalization

The problem of bearings-only target localization is to estimate the location of a fixed target from a sequence of noisy bearing measurements. Although, in theory, this process is observable even without an observer maneuver, estimation performance (i.e., accuracy, stability and convergence rate) can be greatly enhanced by properly exploiting observer motion to increase observability. This work addresses the optimization of observer trajectories for bearings-only fixed-target localization. The approach presented herein is based on maximizing the determinant of the Fisher information matrix (FIM), subject to state constraints imposed on the observer trajectory (e.g., by the target defense system). Direct optimal control numerical schemes, including the recently introduced differential inclusion (DI) method, are used to solve the resulting optimal control problem. Computer simulations, utilizing the familiar Stansfield and maximum likelihood (ML) estimators, demonstrate the enhancement to target position estimability using the optimal observer trajectories     

The effects of microgravity on the skeletal system--a review

Exposure of astronauts to microgravity leads to the loss of calcium from weightbearing bones. Prolonged exposure, e.g., during a journey to Mars, may present problems on return to Earth, with increased risk of fractures and premature osteoporosis in later life. The precise mechanisms of calcium loss have yet to be determined although a key feature is the absence of mechanical loading. Countermeasures aimed at reducing calcium loss to acceptable levels include the use of exercise, drugs, dietary modifications and inertia suits such as the Soviet "Penguin" suit. Missions of a number of years may, however, require the development of artificial gravity on a spacecraft. The country that first solves the physiological problems of man in space and, in particular, skeletal calcium loss, will almost certainly be the first to be able to put a man on Mars.     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

Frequency fluctuations of coherent signals from spacecraft observed during dual-frequency radio sounding of the circumsolar plasma in 2004–2008

We have performed spectral processing of the data of experiments on radio sounding of circumsolar plasma by coherent S- and X-band signals from the spacecraft Ulysses, Mars Express, Rosetta, and Venus Express carried out from 1991 to 2009. The experiments were realized in the mode of coherent response, when a signal stabilized by the hydrogen standard is transmitted from the ground station to a spacecraft, received by the onboard systems, and retransmitted to the Earth with conserved coherence. Thus, the signal sounding the coronal plasma passes twice through the medium: on the propagation path ground station — spacecraft and on the same path in the opposite direction. The spectra of frequency fluctuations in both the bands are obtained and, using them, the radial dependences of fluctuation intensities are found, which can be approximated by a power law. It is shown that the ratio of intensities of frequency fluctuations in the S- and X-bands is comparable with the theoretical value and characterizes the degree of correlation of irregularities of the electron density along the propagation path ground station — spacecraft and back. Analysis of the correlation of frequency fluctuations on the two paths allows one to get a lower estimate of the outer scale of the circumsolar plasma turbulence. For heliocentric distances R = 10 solar radii (R _S ) the outer scale is larger than 0.25R _S .     

基于LabVIEW平台的数字抽取滤波器的设计与应用

介绍了基于LabVIEW平台的数字抽取滤波器的设计。该方法是对高采样率的数据进行低通数字滤波，然后对结果用1／K倍重新采样，将数字信号频带压缩K倍，从而实现动态测试较大的动态范围要求和划分频带要求，数字抽取滤波器的设计包含调制，数字滤波和抽取三方面，LabVIEW是一种基于图形编程语言（G语言）的开发环境，采用交互界面设计，模块化编程，该滤波器也是作者正在研制的动态测试分析虚拟仪器的一个重要组成部分。本文给出了在LabVIEW平台上所进行数字抽取滤波器的设计原理，仿真结果和在动态数字信号分析中的应用。     

Current Issues and Future Trends: DVB-RCS Satellite Systems

The telecommunications market is reaching new types of customers who require their applications anywhere and anyway. Therefore, the DVB-RCS standard, which had great success in the fixed version is changing in this direction. The main objective of this work is to give an overview of architectures and technologies that can be used for implementation of a first-generation of advanced mobile satellite systems for the provision of broadband multimedia services.     

Space-borne technology and inversion techniques for radar

This presents recent progress of the state-of-the-art of space-borne radar technology in case of either earth-orbiting or planetary-orbiting satellites and space probes, respectively. In addition to that, recent progress is also discussed concerning specific inversion techniques to evaluate radar measurements; i.e., the art of deriving the relevant physical quantities to be determined such as terrain and depth profiles for planetary surface and/or subsurface structures ((3D)-profiles) from radar data measured depending on signal frequency, aspect angle, polarization, etc., as a function of time.     

Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP Sharc and IMU parameters are forecasted.