Calculation of Probability of Detection with Target Scintillation

This paper presents a computational method for the calculation of probability of detection using measured radar target cross-section data. The described method can also be used for probability of detection calculations when the radar target cross section follows a specified probability density function. Using the computational procedure of the paper, a number of curves are generated which can be used for probability of detection calculations with exponential and Gaussian radar target cross-section distributions. The results obtained using theoretical distributions are compared with the corresponding results using actual target cross-section measurements. The results of computer runs are compared to the corresponding values in the literature where available.     

The Local Bubble and Interstellar Material Near the Sun

The properties of interstellar matter at the Sun are regulated by our location with respect to a void in the local matter distribution, known as the Local Bubble. The Local Bubble (LB) is bounded by associations of massive stars and fossil supernovae that have disrupted dense interstellar matter (ISM), driving low density intermediate velocity ISM into the void. The Sun appears to be located in one of these flows of low density material. This nearby interstellar matter, dubbed the Local Fluff, has a bulk velocity of ∼19 km s⁻¹ in the local standard of rest. The flow is coming from the direction of the gas and dust ring formed where the Loop I supernova remnant merges into the LB. Optical polarization data suggest that the local interstellar magnetic field lines are draped over the heliosphere. A longstanding discrepancy between the high thermal pressure of plasma filling the LB and low thermal pressures in the embedded Local Fluff cloudlets is partially mitigated when the ram pressure component parallel to the cloudlet flow direction is included.     

The Solar Chemical Composition

We present our current knowledge of the solar chemical composition based on the recent significant downward revision of the solar photospheric abundances of the most abundant metals. These new solar abundances result from the use of a 3D hydrodynamic model of the solar atmosphere instead of the classical 1D hydrostatic models, accounting for departures from LTE, and improved atomic and molecular data. With these abundances, the new solar metallicity, Z, decreases to Z=0.012, almost a factor of two lower than earlier widely used values. We compare our values with data from other sources and analyse a number of impacts of these new photospheric abundances. While resolving a number of longstanding problems, the new 3D-based solar photospheric composition also poses serious challenges for the standard solar model as judged by helioseismology.     

Coronal heating by dissipation of magnetic structure

Coronal loops are heated by the release of stored magnetic energy and by the dissipation of MHD waves. Both of these processes rely on the presence of internal structure in the loop. Tangled or sheared fields dissipate wave energy more efficiently than smooth fields. Also, a highly structured field contains a large reservoir of free magnetic energy which can be released in small reconnection events (microflares and nanoflares). The typical amount of internal structure in a loop depends on the balance between input at the photosphere and dissipation. This paper describes measures of magnetic structure, how these measures relate to the magnetic energy, and how photospheric motions affect the structure of a loop.The magnetic energy released during a reconnection event. can be estimated if one knows the equilibrium energy before and after the event. For a loop with highly tangled field lines, a direct solution of the equilibrium equations may be difficult. However, lower bounds can be placed on the energy of the equilibrium field, given a measure of the tangling known as the crossing number. These bounds lead to an estimate of the buildup of energy in a coronal loop caused by random photospheric motions. Parker's topological dissipation model can plausibly supply the 10⁷ erg cm^–2 s^–1 needed to heat the active region corona. The heating rate can be greatly enhanced by fragmentation of flux tubes, for example by the breakup of photospheric footpoints and the formation of new footpoints.     

Ll-CFAR: a flexible and robust alternative

A new family of constant false alarm rate (CFAR) processors is introduced. An Ll-CFAR forms its noise power estimate by linearly filtering ranked samples from the reference set; the weights of this combination, however, depend not only on the rank, but also on the relative proximity of the sample to the cell under test. From the class of Ll-CFARs may be chosen members which effectively censor spurious targets; members which exhibit impressive control of false alarm in the presence of a clutter edge; and members which are robust against both such inhomogeneities. While the design of such schemes is involved, their implementation is not significantly more burdensome than that of plain ordered statistic CFAR (OS-CFAR). After a discussion of the stochastic training of Ll-CFAR, the performance is thoroughly assessed under the most commonly encountered instances of environmental conditions, and compared with those of classical CFAR techniques     

Steady-state analysis of the constant-frequency clamped seriesresonant converter

A constant-frequency diode-clamped series resonant converter (CFCSRC) is proposed as a solution to problems associated with frequency-controlled resonant converters. This converter has two resonant frequencies, and control is achieved by varying the relative time spent at each switching frequency. Two zero-current-switching (ZCS) modes are examined and plotted in the output plane. An equation is given for the boundary between the two ZCS modes, as well as an expression for the boundary between ZCS and non-ZCS operation; both are plotted in the output plane. The output equation for the main mode is shown to be hyperbolic. Converter peak voltages limited to the input voltages, and peak currents are less than those of the frequency-controlled clamped series resonant converter over a large operating range. Data from a prototype converter are compared with theoretical data and are shown to be in good agreement with the theoretical model     

Speech Data Rate Reduction Part II: Applicability of Sensitivity and Error Analysis

This paper deals with the application of modern estimation techniques to the problem of speech data rate reduction. It is desirable to adaptively identify and quantitize the parameters of the speech model. These paramaters cannot be identified and quantized exactly; the performance of the predictor is thereby degraded and this could prevent data reduction. In many cases it is desirable to emply a suboptimal predictor in order to simplify the algorithms, and predictor performance is again degraded. This paper develops sensitivity and error analysis as a potential method for determining quantitatively how speech data reduction system performance is degraded by imprecise parameter knowledge or suboptimal filtering. An intended use of the sensitivity and error analysis algorithms is to determine parameter identification and model structure requirements of configuration concepts for adaptive speech digitizers. First, sensitivity and error analysis algorithms are presented that form the basis for the remainder of the work. The algorithms are then used to determine how imprecise knowledge of vocal tract parameters degrades predictor performance in speech. Transversal filters have previously been proposed for this application. The sensitivity analysis algorithms are then used to determine when and by how much the transverse filter is suboptimal to the Kalman filter. In particular, the question of how effectively a higher order of all-pole model approximates a system with zeros is answered, as this question is of considerable importance in speech. Finally, the physical significance of the innovations process in speech data rate reduction is studied.     

A Systematic Approach to Blind-Speed Elimination

In radars that achieve a high subclutter visibility by coherent processing over several pulses, a serious problem appears in the form of blind Dopplers, or ?speeds,? at which target detection is impossible. Of the possible methods of eliminating these blind speeds, the most basic one that is employed when the performance requirements are high involves the use of several PRF's. These PRF's are chosen so that coverage is obtained at any Doppler with at least one PRF. The problem faced by the radar designer is to select the set of PRF's and the pulse numbers for each PRF so that the search frame time is minimized. This paper evolves a systematic method for the design of the blind-speed elimination scheme. A formalized approach is offered that shows the possible combinations of wavelength, PRF, and pulse number and the tradeoffs involved, without introducing the confusion ordinarily associated with multiparameter choices.     

Modulation of Cosmic Rays in the Heliosphere From Solar Minimum to Maximum: a Theoretical Perspective

The modulation of galactic cosmic rays in the heliosphere seems to be dominated by four major mechanisms: convection, diffusion, drifts (gradient, curvature and current sheet), and adiabatic energy losses. In this regard the global structure of the solar wind, the heliospheric magnetic field (HMF), the current sheet (HCS), and that of the heliosphere itself play major roles. Individually, the four mechanisms are well understood, but in combination, the complexity increases significantly especially their evolvement with time - as a function of solar activity. The Ulysses observations contributed significantly during the past solar minimum modulation period to establish the relative importance of these major mechanisms, leading to renewed interest in developing more sophisticated numerical models, and in the underlying physics, e.g., what determines the diffusion tensor. With increased solar activity, the relative contributions of the mentioned mechanisms change, but how they change and what causes these changes over an 11-year solar cycle is not well understood. It can therefore be expected that present and forthcoming observations during solar maximum activity will again produce very important insights into the causes of long-term modulation. In this paper the basic theory of solar modulation is reviewed for galactic cosmic rays. The influence of the Ulysses observations on the development of the basic theory and numerical models are discussed, especially those that have challenged the theory and models. Model-based predictions are shown for what might be encountered during the next solar minimum. Lastly, modulation theory and modelling are discussed for periods of maximum solar activity when a global reorganization of the HMF, and the HCS, occurs. This revised version was published online in August 2006 with corrections to the Cover Date.     

Robust adaptive beamforming for HF surface wave over-the-horizon radar

Adaptive beamforming is used to enhance the detection of target echoes received by high frequency (HF) surface wave (HFSW) over-the-horizon (OTH) radars in the presence of spatially structured interference. External interference from natural and man-made sources typically masks the entire range-Doppler search space and is characterized by a spatial covariance matrix that is time-varying or nonstationary over the coherent processing interval (CPI). Adaptive beamformers that update the spatial filtering weight vector within the CPI are likely to suppress such interference most effectively, but the intra-CPI antenna pattern fluctuations result in temporal decorrelation of the clutter which severely degrades subclutter visibility after Doppler processing. A robust adaptive beamformer that effectively suppresses spatially nonstationary interference without degrading subclutter visibility is proposed here. The proposed algorithm is computationally efficient and suitable for practical implementation. Its operational performance is evaluated using experimental data recorded by the Iluka HFSW OTH radar, located near Darwin in far north Australia.